• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.475-478
• /
• 2000

Maxwell displacement current(MDC) was generated when the area per molecule was about 140${\AA}$$^2$and 100${\AA}$$^2$. MDC were investigated in connection with monolayer compression cycles. It was found that the maximum of MDC appeared at the molecular area just before the initial rise of surface pressure in compression cycles. The absorption spectra of polyamic acid containing p-methoxyazobenzene in a mixture of N,N-dimethylacetamide(DMAc) and benzene(1:1 by volume) solution was induced photoisomerization by UV and visible light irradiation. The precursor LB film was heated in a vacuum dry oven at 120$^{\circ}C$ in order to convert it into the LB film of polyimide. The absorption spectra of LB films were also induced photoisomerization by UV and visible light irradiation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.487-490
• /
• 1999

The Maxwell displacement current was generated from 4-octyl-4'-(5-carboxyl-pentamethyleneoxy)- azobenzene (denoted as 8A5H) monolayer Langmuir-Blodgett films prepared on Cr/Au-coated glass substrates due to trans-cis photoisomerization of 8A5H by application of alternate irradiation with UV light and Visible light. The displacement current was generated due to the trans-to-CIS photoisomerization by irradiation with ultraviolet light($\lambda_1$=360nm). Whereas the displacement current was generated in the opposite direction due to the cis-to-trans photoisomerization by photoirradiation with visible light($\lambda_2$=450nm). Finally, We concluded that Displacement current change according to power capacity photoirradiation, the more higher generate the more higher power capacity magnitude.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.4
• /
• pp.281-286
• /
• 1999

We carried out this subject to observe photoisomerization using 8A5H and phospholipid(DLPC) containing azobenzene group which has reversible to cis-trans by light irradiation. We investigated the photoisomerization and property of the monolayer film on quartz substrate prepared by the mixture of 8A5H and phospholipid deposited using Langmuir-Blodgett(LB) method. It was found that the absorption spectrum of the 8A5H and phospholipid LB monolayer was induced to photoisomerization by alternate light irradiation. And the absorbance of both the solution of mixtures of 8A5H-phospholipid and LB film was reversibly changed by the acid-base exposure and alternate temperatures.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.554-557
• /
• 2004

Monolayers of lipids on a water surface have attracted much interest as models of thin films, also as precursors of multilayer systems promising many technical applications. Photoisomerization in monolayers of a novel azobenzene compound, azobenzene dendrimer, was investigated for the first time by means of the absorption spectrum and Maxwell displacement current (MDC) technique. Dendrimers are well-defined macromolecules exhibiting a tree-like structure, first derived by the cascade molecule approach. According to the absorption spectrum, trans-to-cis conversion ratio was estimated to azobenzene dendrimer deposited onto a glass substrate. As a result, It's photoisomerization progressed by dendrimer.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.2
• /
• pp.41-54
• /
• 2000

Photochemical modulation of Bragg-reflection wavelengths based on isomerization of an azobenzene (Azo) and subsequent change in reflectance was investigated in cholesteric liquid crystals (ChLCs) which reflect light in visible wavelength region. Irradiation at 366 nm, which causes an efficient transcis isomerization of Azo, led to change in reflected color of ChLCs toward shorter wavelengths with a concomitant lowering of phase transition. Reversible change in color was induced all-optically by alternate irradiation at effective wavelengths for reversible isomerization of Azo. A considerable variation in reflectance was also observed when the photoinduced change in color was measured by a probe light with the same handedness as the ChLCs. The spectral Position of selective light reflection in the initial states played an important role to produce a normal-mode and a reverse-mode switching in photoinduced modulation of reflectance of the ChLCs with respect to the probe light.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.4
• /
• pp.273-279
• /
• 1999

In order to study a reversible photoisomerization of disperse red l(DR 1) attached on natural polymers, cellulose acetate containing DR l(DR 1/CA adduct) was prepared, and the changes of UV/VIS spectra of its solution(benzene, DMAc). thick film, and LB film were investigated by alternate irradiation with two different wave length lights. DR 1/CA adduct was prepared through tosylation of partially hydrolyzed cellulose acetate followed by reaction with DR 1 at $100^{\circ}C$ in pyridine. From the UV/VIS spectra of DR 1/CA adduct dissolved in DMAc solvent including phosphoglyceride before and after irradiation at 360nm and 45Onm, we found out the changes of UV/VIS spectra were reversible. In addition, the change of UV/VIS spectra of this adduct solution was strongly depended on the sorts of solvents and temperature. As the temperature was increased, UV/VIS spectra of this adduct solution in DMF showed blue shift. These results provided this solution could be applied to a temperature sensor. In the thick film case, we also obtained similar results with solution case. LB monolayer and trilayer from DR 1/CA adduct was obtained by scattering the solution including phosphoglyceride on water surface at the surface pressure of 8mN/m. After irradiation on that LB monolayer and trilayer, the reversible photoisomerization was also detected. From these results we concluded DR 1/CA adduct was suitable for the application to data storage and optical switch, etc.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.1
• /
• pp.75-85
• /
• 1996

The absorption spectra of synthesis of long chain fatty acid containing azobenzene start from p-(p'-hydroxy phenyl azo)-benzoic acid was investigated by ultraviolet spectrophotometery in chloroform solvent at the various temperature. In addition, The pressure-area of the water-air interface was obtained and the LB film was fabricated onto a quartz slide and quartz crystal by conventional Langmuir-Blodgett(LB) method. The UV absorption spectra of Langmuir-Blodgett(LB) film on quartz slide and spectrum of monolayer formed on quartz crystal have been measured. Long chain fatty acid containing azobenzene are induced phtoisomerization by the application of u. v. and visible light irradiation alternatively the reversibility of phtoisomerization was more clear difference when the number of $C_{n}$ increased but, not so good at $C_{14}-azo$. At the pressure-area isotherms, the value of surface pressure increment were decreased when the number of $C_{n}$ increased. A surface pressure of 20mN/m was obtained as a proper one for a film deposition. The photoisomerization at LB films were induced by application of UV and visible light irradiation alternatively. So the LB film of long chain fatty acid containing azobenzene has possibility to being applied to functional molecular devices such as photomemory and light switching.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.698-705
• /
• 2015

Two series of symmetric dimesogenic compounds containing a butylene or 1-methylbutylene spacer as a flexible group were synthesized. The mesogenic groups of synthesized compounds consist of an azobenzene group with a terminal substituent. Chemical structures as well as, thermal, mesomorphic, and photochemical properties of the synthesized compounds were investigated using FT-IR, $^1H-NMR$, differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and UV-visible spectrometry. P-H, P-F, and $P-OC_6H_{13}$ showed monotropic liquid crystal phases, whereas the others showed enantiotropic liquid crystal phases. Compounds with butylene group as a flexible spacer exhibited wider mesophase temperature ranges and higher thermal transition temperatures than compounds containing a 1-methylbutylene group. Compounds with a high absolute value of the Hammett substituent constant exhibited high thermal transition temperatures and improved stability in the liquid crystal phase. Furthermore, in the absence or presence of UV light illumination, terminal substituents of the azomesogenic group were important factors in deciding the maximum absorbance wavelength (${\lambda}_{max}$) and the rate of photoisomerization (K).