• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.432-437
• /
• 2017

Yellow sticky traps have been commonly used for monitoring tobacco whitefly populations in open-fields, as well as in greenhouses. However, the attractiveness depends on various factors such as the reflected intensity (brightness) and hues of yellow color (wavelength) of the trap surface, which is often influenced by environmental conditions and may sometimes affect tobacco whitefly capture. Therefore, the use of light-emitting traps can be a significant complementary tool to strengthen the attractiveness and selectivity of these traps. This research was carried out in tomato greenhouses to evaluate the light-emitting trap as potential attractants for Bemisia tabaci adults. The results showed that B. tabaci adults on average preferred (p>0.05) traps in yellow lights (590 nm) ($168{\pm}7.6adults/trap$) compared to traps in white lights ($106{\pm}4.6adults/trap$) and traps without lights ($60{\pm}4.8adults/trap$). The yellow light trap(590 nm) showed the most attractive to B. tabaci adults, followed by a little lower attraction to the white light trap(450-625 nm), whereas the control (no light trap) was little attractive to B. tabaci adults. These results suggested that yellow and white light traps could have a promising use in greenhouses for the identification, monitoring, and pest control tools of tobacco whiteflies.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.763-769
• /
• 2013

Soybean oil was stored in polyethylene for 12 weeks at $20^{\circ}C$. The influence of LED (light emitting diode) irradiation on four different wavelengths and fluorescent light was investigated. The pattern changes of volatile components in soybean oil was analyzed by electronic nose based on mass spectrometer. The obtained data from electronic nose were analyzed by discrimination function analysis. Under fluorescent light, the discriminant function first score (DF1) was significantly moved from positive position to negative one after 4-12 weeks. It means that the volatile compounds related to quality of lipid. It was shown to increase slowly due to green light of LED treatment, while blue and white LED light was influenced significantly as well as fluorescent light irradiation. Selection of LED irradiation would provide to keep good quality of soybean oil under distribution chain system.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1222-1227
• /
• 2006

본 연구의 목적은 객체의 형상정보(3D mesh)와 색/질감정보(image)를 이용하여 텍스쳐 맵핑된 고품질의 가상모델을 생성하는데 있다. 3 차원 형상정보에 대응하는 이미지 상의 텍스쳐 좌표 관계를 구하기 위해 오브젝트 좌표계와 카메라 좌표계 사이의 변환행렬, 카메라의 초점거리, 카메라 CCD 와 프레임상의 이미지 사이의 aspect ratio 를 파라미터로 하는 3D-2D 정합을 수행한다. 이러한 3D-2D 정합을 효율적으로 수행하기 위하여, 카메라 내부파라미터 검정단계, 신뢰도가 높은 초기해 설정단계, 비선형 최적화(Newton method) 단계로 접근한다. 또한, 색/질감정보로 이용되는 객체의 이미지는 촬영조건에 의해 스펙큘러(specular)나 이미지 픽셀값의 포화상태(saturation) 등의 결점을 포함한다. 영상내의 스펙큘러 좌표와 3D-2D 정합의 결과를 이용하여 촬영 당시의 광원을 추정하고, 근사화된 빛반사도 함수(BRDF)를 이용하여, 텍스쳐의 픽셀값 변조를 통해 이미지 촬영 당시의 광원효과가 제거된 디퓨즈 텍스쳐를 획득한다. 본 연구에서는 퐁(Phong)의 모델을 근사화한 빛 반사도 함수 모델로 사용하였다.

• The Research Journal of the Costume Culture
• /
• v.15 no.2 s.67
• /
• pp.214-220
• /
• 2007

The purpose of this study is to derive the use of the luminous source corresponding to the intention and contribute to product display by visually evaluating the relations between luminous source and colors, analyzing and reviewing the subjective perceptions depending on the luminous source, and clarifying the colors of artificial luminous source that look close to natural lights by each color. Hence, the researcher objectified the subjective evaluation for which they used sensory evaluation method with four colors of luminous sources(natural colors, 2800K, 4200K, and 6500K) and five colors of textiles(purple, blue, green, yellow, and red) by quantifying the evaluation. As a result, we could obtain the conclusion as follows. As for the temperature of textile colors under artificial luminous sources that appeared most close to the colors of textiles under natural luminous sources, 6500K was most frequent, and the temperature of the luminous sources that appeared most different was 2800K. However, as there were also 4200K colors that looked most close to the textile colors under natural light source, it was observed that the temperature differs depending on the textile colors. In addition, less glossy textiles exhibited more visual changes by luminous source colors than comparatively more glossy textiles, and it was observed that the most influenced color was purple, as purple has shown the largest difference among colors.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.816-823
• /
• 2016

This paper studies a light emitting diode(LED) overlapping method of a head-up display that consists of a digital micro device(DMD) panel and a red, green, blue LED in order to increase the brightness of display system and optical output power. This optimization overlapping method removes a quantization noise which occur due to LED overlapping too excessive and stabilizes the junction temperature of LED. In order to reduce junction temperature of LED, the a correlation between a green duty and LED overlapping ratio is studied. Throughout this study, the brightness of head-up display exhibited high increasement ratio of luminance around 33.3 percent at 39 percent overlapping method.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.473-479
• /
• 2003

The purpose of this study is to recover the CIE XYZ tristimulus values of original colors from scanner output signals, and to reproduce true colors on the monitor. The process of this study is composed of three steps; scanner characterization, chromatic adaptation transformation, and color space transformation between and sRGB. Especially, in the process of recovery, scanner stimuli were obtained accurately by dividing the non-linear photometric response curve into two parts. As the result of test to EPSON Expression 1680 scanner, the average color difference between true and recovered XYZ for 228 target colors, 22 test neutrals, and 36 test colors were 1.49, 0.97, and 1.42 $\Delta$ $E_{UV}$ *, respectively. With the transformation from illuminant D50 to illuminant D65, the input signals to sRGB monitor were predicted. Finally, it could be found that displayed colors with predicted input signals were very consistent with true colors. with true colors.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.230-231
• /
• 2011

LED (Light Emitting Diode) 조명 기술이 친환경 조명 기술로 떠오르고 있다. LED는 기존의 백열등, 형광등 조명에 비해 에너지 효율이 좋아, 최근 우리나라에서도 가로등, 신호 등을 LED 조명으로 교체하고 있다. 뿐만 아니라 건물의 외장이나 전시회 등에 사용되는 LED 시스템의 경우, 가격적인 측면보다 성능적인 측면이 더 중요시 되고 있으며, 이러한 고급조명용 LED 시스템에는 색을 관리 및 제어해주는 장치 즉, MCU의 탑재가 일반적이다. 본 논문에서는 LED를 이용한 조명용 백색광원의 색좌표 및 색온도 제어가 가능한 디지털 파워플랫폼을 개발하고 그 성능을 측정하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.607-610
• /
• 2005

상황에 따라 조명의 밝기나 종류 등에 영향으로 CMOS 이미지 카메라 센서로부터 입력 받은 영상의 색상은 원색과 차이가 있다. 이러한 왜곡된 색상을 Red, Green, Blue와 휘도를 이용하여 원래의 색으로 표현하는 과정이 White Balance이다. 사람은 색이 눈으로 입사되는 물리적인 자극 외에 대뇌의 작용으로 광원이 바뀌어도 같은 색으로 인지하는 특징이 있다. 따라서 이러한 과정이 없을 시에는 우리의 눈으로 보는 것과 영상장치를 통해서 모니터에 표시되는 영상의 색상과 차이가 생긴다. 본 논문에서는 RGB와 휘도를 이용하는 방법과 논문에서 제안한 히스토그램을 이용하는 방법에 대해 소프트웨어를 사용하여 각각의 상황에 따라 알고리즘을 적용하여 WB를 수행한 결과에 대하여 PSNR을 구하여 비교 분석한 후 최적화된 알고리즘을 이용하여 하드웨어 설계 언어인 VHDL을 사용하여 구현하고, ModelSim6.0a를 이용하여 데이터를 검증한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.9-16
• /
• 2005

The purpose of this research is to acquire emotional data on luminous source by measuring and evaluating human emotional response to the change of the optical feature of luminous environment Luminous sources used in actual architectural space were selected with the optical feature of luminous soured then to measure and analysis human emotional response on Luminous Source. As a result of that 1) In the result of performance measurement by the item of the clear vision of an optic function the fluorescent lamp of daylight indicated the most excellent Performance. 2) In the item of fatigue and stress, the metal halide lamp and mercury lamp showed the most 3) In $\ulcorner$ suitable in light$\lrcorner$, $\ulcorner$a similar with daylight$\lrcorner$ adjective of the amenity item the fluorescent lamp of daylight which color temperature was high turned up to be high also, in $\ulcorner$brilliant$\lrcorner$, adjective, the metal halide lamp and mercury lamp turned up to be low. 4) In the result of factor analysis, three factors $\ulcorner$activity$\lrcorner$, $\ulcorner$potency$\lrcorner$, $\ulcorner$evaluation$\lrcorner$ were abstracted and $\ulcorner$activity$\lrcorner$ factor has the most influential on evaluating the mood of interior space. 5) For the affection in the mood evaluation by each luminous sources, $\ulcorner$activity$\lrcorner$ factor was the most influential by metal halide lamp and fluorescent lamp of daylight, $\ulcorner$potency$\lrcorner$ factor was most influential by kind of incandescent lamp, $\ulcorner$evaluation$\lrcorner$ factor was most influential by fluorescent lamp of low color temperature.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.1
• /
• pp.43-50
• /
• 2003

Today, the demand of image acquisition systems grows as the multimedia applications go on increasing greatly. Among the systems, film scanner is one of the systems, which can acquire high quality and high resolution images. However due to the nonlinear characteristic of the light source and sensor, colors of the original film image do not correspond to the colors of the scanned image. Therefore color correction mr the scanned digital image is essential in the film scanner. In this paper, polynomial regression method is applied for the color correction to CIE $L^{*}$ $a^{*}$ $b^{*}$ color model data converted from RGB color model data. A1so a film scanner hardware with 12 bit color resolution for each R, G, B and 2400 dpi was implemented by using TMS320C32 DSP chip and high resolution line sensor. An experimental result shows that the average color difference ($\Delta$ $E^{*}$$_{ab}$ ) is reduced from13.48 to 8.46.6.6.6.6.