• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.277-285
• /
• 2005

The purpose of this study was to evaluate photothermal effect of laser, which eliminates and reduces bacteria causing periodontal disease, on treatment of periodontal disease. This study included subjects with moderate periodontitis who visited the Department of Oral Medicine, College of dentistry, Yonsei University. The subjects were divided into experimental group, where Argon laser treatment was used, and control group, where conventional subgingival curettage was used. Gingival fluids from each subject were collected prior and after 1 week of the treatment, and changes in number of bacterial colonies cultured from aerobic as well as anaerobic bacteria responsible for the periodontal disease, and changes in clinical indices related to the periodontal disease, such as plaque index, gingival index, sulcus bleeding index, were analysed. As a result, the number of bacterial colonies of aerobic and anaerobic bacteria reduced after 1 week of the treatment in both groups, especially the bacterial colonies of anaerobic bacteria which showed statistically significant reduction(p<0.1). However, there was no significant difference between the experimental group and the control group. Clinical indices including plaque index, gingival index, sulcus bleeding index were reduced after 1 week of the treatment in both groups. In the experimental group, gingival index(p<0.1) and sulcus bleeding index(p<0.01) showed significant reduction, and, in the control group, sulcus bleeding index(p<0.01) showed significant reduction. However, there were no significant differences in each indices between the two groups. The above results suggest that Argon laser could be used as a substitute of conventional subgingival curettage, or in combination with subgingival curettage which would increase the effect of the treatment. Although the possibility of clinical application of Argon laser was observed in this study, more randomized-controlled research, including acquirement of sufficient samples as well as long-termed follow up, would be necessary before clinically effective application of Argon laser.

• Journal of Life Science
• /
• v.14 no.5
• /
• pp.761-769
• /
• 2004

This study was investigated the occurrence of sclerotinia rot caused by Sclerotinia sclerotiorum at the major perilla cultivating area, Gangdong-dong, Gangseo-gu, Busan in 1998. The incidence of this disease ranged from 8.1 to 28.3% at Gangdong-dong area during the growing seasons. Symptoms of the disease initially appeared damping-off of infected stems and soft-rot on the leaves of perilla. Under the relatively high humidity, abundant white mycelia of the pathogen formed on the lesion developed into black sclerotia later and the infected leaves were finally fell down. Sixteen isolates, Sl-S16, isolated from diseased lesions showing typical symptoms, and pathogenicity was tested using mycerlial disks. Among them, S2 isolate showing the most strong pathogenicity was selected and identified as Sclerotinia sclerotiorum on the basis of morphological and cultural characteristics. For biological control, an antagonistic bacteria, N4 isolate which effectively inhibited not only mycelial growth of S2 isolate but also suppress sclerotinia rot on the pot assay, was selected and identified as Bacillus megaterium according to Bergey's manual and API system., Wettable powder type, N4 formulation using B. megaterium N4 isolate was developed and estimated its control effect on perilla crops in a plastic house. As a results, N4 formulation which applied before 3 days inoculation of pathogen was effectually controlled Sclerotinia rot as the control value of 98.0%, was more effective than chemical fungicide, benomyl showing the control value of 78.0%. This is the first report of wettable powder formulation as a biocontrol agent using B. megaterium N4 against Sclerotinia rot caused by S. sclerotiorum on perilla.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.37-37
• /
• 2019

벼 재배포장에서 화학약제의 반복적인 사용으로 인한 병원균의 약제내성과 환경오염은 커다란 문제가 되고 있다. 이러한 약제내성을 극복하기 위한 노력의 하나로 유전자수준의 약제내성기작의 규명과 대체물질의 발굴이 필요하다고 사료된다. 이에 본 연구에서는 식물종이 지니는 광범위한 다양성에 주목하였고, 700여 종의 식물추출물을 벼 도열병균에 처리해 균사성장억제효과를 조사하는 선별실험을 실시하였고, 영릉향과 지모추출물이 높은 균사성장억제효과를 보이는 것을 확인했다. 영릉향과 지모 추출물이 화학약제를 대체하는 대안물질로서 가능성을 조사하기위해 균사성장억제능력 확인실험, 분획, HPLC (High Performance Liquid Chromatography), 포자발아 및 부착기 형성확인검정, ABC transporter의 발현조사, 환경독성실험등을 실시했다. 실험 결과, 영릉향과 지모 추출물을 벼 도열병균에 처리하였을 때 약제저항성유전자 ABC transporter의 기능이 저하되고 화학약제에 대한 내성이 감소를 확인했으며, 분획과 HPLC분석을 통해 영릉향과 지모의 유효성분을 확인했다. 또한, 실제 포장에서 영릉향 추출물과 지모 추출물을 사용하여 벼 도열병 방제가를 확인하는 포장시험을 실시한 결과, 각각 63%와 62%의 목 도열병 방제가를 확인 하였으며, 인축환경에 대한 유해성을 조사하기 위해 어류, 설치류, 중치류, 곤충을 대상으로 영릉향 추출물을 처리해 급성독성시험 실시한 결과, 고농도의 투여량에서도 독성이 없는 것을 확인했다. 위의 실험 결과를 토대로, 영릉향과 지모추출물이 화학농약에 의한 환경오염을 막을 수 있고, 인축과 환경에 피해를 입히지 않는 친환경자재로 친환경적인 생물농약의 신소재로서 가능성을 나타냈다고 사료된다.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.113-117
• /
• 2020

In this paper, We investigated the effect of heat treatment process using photo-thermal effect in order to improve mechanical properties of nanostructure on polymer films made by nanoimprint process with hybrid resin. Nanostructures which have a low refractive characteristic were fabricated by UV nanoimprint and after that heat treatment was performed using IPL (intense pulsed light) under process condition of 550 V voltage, pulse width 5 ms, frequency 0.5 Hz. The transmittance and mechanical property of fabricated nanostructure films were evaluated to observe changes in the pattern transfer rate and mechanical properties of nanostructures. The transmittance of the nanostructure was measured at 97.6% at 550 nm wavelength. Nanoindentation was performed to identify improved anti-scatch properties. Result was compared by the heat source. In case of post treatment with IPL, hardness was 0.51 GPa and in the case of hotplate was 0.27 GPa, resulting the increase of hardness of 1.8 times. Elastic modulus of IPL treated sample was 5.9GPa and Hotplate treated one was 4GPa, showing the 1.4 time increase.

• Journal of the Korean Chemical Society
• /
• v.22 no.6
• /
• pp.370-379
• /
• 1978

The specific rate constants for the oxidation reactions of carbon monoxide on a unit catalytic surface area were measured. The catalysts used were NiO made from $Ni(NO_3)_2,\;and\;Ni(OH)_2$, and Mn$O_2$ made from Mn$(NO_3)_2$. At low pressure the reaction rate was found to be of second order and the activation energies were 12 kcal/mole (on NiO made from Ni$(NO_3)_2$, 17 kcal/mole (on NiO made from Ni$(OH)_2)$) and 18 kcal/mole (on Mn$O_2$). Plausible reaction mechanisms were proposed from the experimentally determined reaction orders.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.113-124
• /
• 2022

In wartime conditions, the communication system of military aircraft is exposed to jamming, and it is necessary to mount communication equipment with high anti-jamming performance in order to perform air operations smoothly even in an environment where jamming attempts are made. In this paper, we check in detail the jamming and anti-jamming technology that can be applied to wireless communication, and the data disclosed on the difference in specifications of the next-generation anti-jamming radio with frequency hopping method and the improvement of anti-jamming performance according to these changes. It was briefly analyzed within the scope. In addition, the points to be considered when designing a new domestic aircraft and the possibility of installing the next-generation anti-jamming communication equipment on the currently operating aircraft were confirmed, and the tactical usefulness of improving the anti-jamming capability of the next-generation anti-jamming communication equipment was confirmed.

• Research in Plant Disease
• /
• v.22 no.3
• /
• pp.208-212
• /
• 2016

During the nursery seedlings stage at Muan in 2013, moisture and temperature conditions were favorable for the occurrence of onion downy mildew. Several fungicides were evaluated for controlling onion downy mildew at the stage of seedling. The disease incidence of the untreated control was 51.1%, which was sufficient to evaluate the fungicide efficacy for the control of onion downy mildew. Incidence at the mancozeb treatment (MAN treatment) was 4.4% and it was the highest control value of 91.4%. Incidence at the various fungicides treatment (MIX treatment) consisted of amectotradin plus dimethomorph, floupicolide plus propamocarb HCl, or dimethomorph plus pyraclostrobin was 10.0%, and the control value of the MIX treatment was 80.4%. Among the tested fungicides, amectotradin plus dimethomorph (AME plus DIM treatment) was selected and treated. Incidence of AME plus DIM treatment was 12.2%. There was statistically significant difference among the three different treatments and the untreated control. These results suggest that the application of fungicides on onion nursery seedlings was effective to control the onion downy mildew.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.434-438
• /
• 2014

The mixture of fluxapyroxad plus pyraclostrobin or the 9 time-spray schedule with various fungicides was evaluated for their efficacy in controlling pear scab in field trials. It showed sufficient condition to evaluate the efficacy of fungicides for the control of pear scab since disease incidence of the untreated control plot was 58.4% or 100% on leaves or fruits, respectively. Pear scab on leaves was occurred by 6.3% at treated plot with the mixture of fluxapyroxad plus pyraclostrobin, resulting in the 89.2% of control value. Incidence of the fruit disease was 16.7% at treated plot with the mixture of fluxapyroxad plus pyraclostrobin, showing 83.3% of control value. When the 9 time-spray schedule was tested, pear scab was occurred by 5% or 13.3% on leaves or fruits, respectively. Their control values were the 91.4% on leaves or 86.7% on fruits. Although the 9 time-spray schedule showed slightly lower disease incidence than the mixture of fluxapyroxad plus pyraclostrobin, but there is no statistically significant difference. These results suggest that the mixture of fluxapyroxad plus pyraclostrobin can control effectively the pear scab.

• Journal of the Korean Society of Groundwater Environment
• /
• v.1 no.1
• /
• pp.1-5
• /
• 1994

The contaminant migration through the subsurface of Nanjido landfill is studied using a 2-D finite element model of contaminant transport. The leachate mounding caused by the installation of partial slurry wall around the pheriperal area of the Landfill is analysed using the finite difference model of groundwater flow. Model parameters were validated using in-situ concentration data and the behavior of the transport next 30 years is predicted. The sensitivities of chloride concentration by the change of model parameters, e.g. leachate mounding in the Landfill and the dispersivity are analysed. The results of the analyses show that the maximum chloride concentration level near Han River caused by the leachate of Nanjido Landfill would be 1488mg/1 and comes 17 years after the landfill closure. Increase of the leachate concentration is caused by the increase of both the leachate mounding and the dispersivity. However, the rate of concentration increase becomes higher with the rise of leachate mounding level, while it tends to converge a certain concentration with the increase of the dispersivity.

• Composites Research
• /
• v.29 no.5
• /
• pp.293-298
• /
• 2016

In this paper, Glass Fiber Reinforced Thermoplastic (GFRTP) for automotive headlight source module was fabricated by compounding and injection molding using PPS (Poly Phenylene Sulfide) resin with glass fiber which has three cross section (round type, cocoon type, flat type). Tensile, flexural, impact properties were investigated on effect of cross section, glass fiber contents. And it was observed flatness, dimensional stability, fluidity depending on glass fiber cross section. As a result, flat glass fiber reinforced thermoplastic's mechanical properties were most excellent. Also, dimensional stability and flatness showed better results when using flat glass fiber.