• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.39-43
• /
• 2020

In this paper, we propose the multi-channel interference cancellation algorithm for visible light communication (VLC) in smart building. The VLC system is communication technology using visible rays that come out in Light Emitting Diode (LED) device. It has energy curtailment effect and possible to use in ubiquitous network service applications. When a large number of users communicate indoors, the performance can be reduced due to channel interference. To remove interference, at the first, the minimum mean square error (MMSE) scheme as interference cancellation methods used, and then the successive interference cancellation (SIC) is applied to obtain additional diversity gain and improve interference cancellation performance. Indoor VLC channel model is employed. The performance is evaluated in terms of bit error rate (BER). From the simulation results, it is confirmed that the proposed scheme has better BER performance compared to the previous systems. As a result, the proposed interference cancellation improves the signal quality of VLC systems by effectively removing the channel noise. The results of the paper can be applied to VLC for smart building and general communication systems.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.102-103
• /
• 2000

화학레이저는 화학연료의 반응에서 생성되는 막대한 화학에너지를 이용하여 레이저를 발생시키며, 반응하는 화학연료의 양에 따라 수천 kW의 고출력을 낼 수 있는 가장 강력한 레이저이다. 화학레이저인 Chemical Oxygen-Iodine Laser(COIL)는 염소기체(Cl$_2$)를 염기성 과산화수소수 용액과 반응시켜 고에너지의 여기산소(O$_2$($^1$$\Delta$))를 생성시키고 여기산소가 다시 요오드 원자와 반응하면서 1.3 $mu extrm{m}$ 파장의 레이저를 발생시킨다.(1)-(2) 이와같은 COIL 레이저는 발진효율이 높고 포화 강도가 높아 수십 kW 급의 고출력이 용이하게 이루어 질 수 있으며 광섬유 전송시 광손실이 가장 적어 레이저 빔의 원격 전송에 의한 재료가공에 적합한 레이저이다. 가공용레이저로 많이 사용하는 $CO_2$ 레이저에 비해 발진 파장이 짧으므로 재료의 광흡수율이 높아 일반 산업분야의 용접/절단에서 기존의 $CO_2$ 레이저를 대체할 것으로 기대되는 상용성이 큰 레이저이다.(3)-(4) 또한 COIL은 우수한 집속 특성을 유지하면서도 고출력의 개발이 가능하다. 이미 외국에서는 비록 단시간 동안 동작하지만 수백 kW급이 실현되었으며 수천 kW 급 고출력 항공기탑재형 COIL 이 수백 km의 거리에서 미사일을 요격하기위해 지금 개발중에 있다.(5) 일반 산업용 광섬유에 의해 쉽게 전송되는 파장인 1.315 $\mu\textrm{m}$ 인 수십 kW 급 COIL 은 조선 등의 중공업산업용 및 원자력 제염/해체분야에서 다용도 기술로서 광범위하게 사용될 것이다. COIL은 다양한 재료와 다양한 두께의 구조물 절단, 표면처리 그리고 용접에도 이용될 수 있다. COIL의 산업화는 빠르게 발전하고 있으며 산업용으로써 장시간 연속사용이 가능한 20-30 kW급 시설이 곧 개발될 것으로 기대된다. 따라서 개발될 고출력 화학레이저가 앞으로 원자력시설의 해체시 작업자의 안전성 향상에 크게 기여할 수 있게 되었다.(6) 여기서는 화학레이저인 COIL 장치와 기본적인 원리, 그리고 염소유량에 따른 출력특성등을 살펴보기로 하겠다. (중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.914-916
• /
• 2013

Renewable energy from the environment in a variety of ways to obtain various forms of energy. Recent functional polymer composites (EAP) to take advantage of the pressure and vibration of physical energy into electrical energy storage, to take advantage of current collector technology is attracting attention. EAP, a type of IPMC (Ionic exchange Polymer Composite) got a hydrophilic properties, marine power plants is being studied as a source of energy. Studies using IPMC marine power plant because there is a constraint on the time, IPMC in real time, which can measure the power generated by the system is required, Due to the nature of the power plant to be floating in the sea through the power cable and data transmission measurement system is hard drive self-generation and wireless data transmission system is required. In this study, IPMC marine power plant is to develop a system of monitoring. IPMC for several power plants to build individual current-voltage measurement system, CAN communication with the main system to collect all the information and wireless data transmission to occur, and Generation of electricity using solar energy to building systems in real-time without an external power supply to drive the measuring system is to develop a monitoring system.

• Journal of the Korean earth science society
• /
• v.33 no.2
• /
• pp.183-199
• /
• 2012

Previous Earth Science textbooks have mostly lacked the latest astronomical phenomena frequently being reported in mass media such as popular science magazines. One of the main directions in the revision of the 2009 National Curriculum of Korea is to actively include those phenomena. Furthermore, despite a close link between astronomy and physics, the concept of modern physics has not been actively introduced in Earth Science textbooks and at the same time the linkage of physics to astronomy has rarely been studies in physics textbooks. Therefore, the concept of integration among different fields in science is emphasized in the new National Curriculum. Transient phenomena in the high energy astrophysical objects are examples that reflect such issue. The purpose of this study is to introduce transferring a real-time data and making imaging of astronomical observations using e-Science. As a first step, we performed the first experiment for a large data transfer of astronomical observation between Korea and Japan using KOREN, a National Research and Education Test Network. We introduce actively on-going fields of e-Science in observational activities of astronomy and astrophysics, and their close interrelationship with scientific inquiry activities and public outreach activities. We discuss our experiment in the scientific and educational aspects to the primitive e-Science activity in the Korean astronomical society and, in turn, provide a prospective view for its application to the scientific inquiry activities and public outreach activities in the upcoming commercial Gbps-level internet environments.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.102-108
• /
• 2010

The photovoltaic system changes solar energy into DC by solar cell and this DC is inverted into AC which is used in general houses by inverter. Recently, the use of power of the photovoltaic system is increased. Therefore, the study of 3 phase solar system to transmit large power is very important. This paper proposes a method that finds simply faults and diagnoses the switch open faults of 3-phase pulse width modulation (PWM) inverter of grid-connected photovoltaic system. The proposed method in $\alpha\beta$ plane uses the patterns of trajectory image as the characteristic parameters and differenciates a normal state and open states of switches. Then, the result is made into tree. The tree is composed of 21 fault patterns and the parameters to classify faults are a shape, a trajectory area, a distributed angle, and a typical vector angle. The result shows that the proposed method diagnosed fault diagnoses, classified correctly them, and made a pattern tree by fault patterns.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.109-120
• /
• 2013

In this paper we proposed the design of the hybrid road lighting control system using solar-light generation. The proposed hybrid road lighting control system be power offer through hybrid controller using Solar-Light Generation, and it is designed so that it can control lighting up. To control supply of continuous power when during power shortages. And the gateway be transmit control command using zigbee to road lighting to ensure that automatic lighting control on human sensing. In this case, the gateway is apply the lighting control algorithm that decisions to the status of the system by a pre-set time schedule and be able to operate. In this paper, the proposed efficiency analysis results of a hybrid road lighting control system was consumed power of 129.6W per day, 3.8KW per month, 47.3KW per annual. As a result, it were able to increase the energy efficiency than existing lighting control system by reduce power consumption of 76.2% and the electricity prices of 76.8%.

• Information and Communications Magazine
• /
• v.19 no.10
• /
• pp.78-92
• /
• 2002

고용량 파장다중분할(WDM) 전송 시스템의 수요가 폭발적으로 증가함에 따라 기존의 erbium-doped fiber amplifiers(EDFA)가 제공하는 이득 대역을 넘어서는 대역폭의 광증폭기의 개발이 촉진되고 있다. 에르븀 이외의 새로운 회토류 첨가물을 사용한 증폭기와 광섬유 내에서의 비선형 현상인 라만 산란에 의한 라만 증폭기에 집중적인 연구가 그 예라 하겠다. 최근 몇 년간의 집중적인 연구를 통하여 현재의 광대역 광 증폭기는 기존의 EDFA(C 벤드 EDFA)가 제공하는 광이득대역의 4∼5배 정도를 쉽게 제공할 수 있다. 이러한 목적을 가지고 통신시장에서 사용될 수 있는 1500nm 근처 대역의 증폭에 대한 세가지의 증폭 기술이 연구되고 있다. 우선, S+밴드(1450-1480nm)와 S밴드(1480-1530nm)의 증폭을 위한 thulium-doped fluoride fiber amplifiers(TDFFA), C 밴드(1530-1560nm)와 L 밴드(1570-1610nm)를 위한 EDFA, 그리고 마지막으로 100nm 이상의 이득대역과 S+에서 L밴드까지 증폭파장대역의 선택이 자유로운 라만 증폭기가 있다. 또한 위의 세 기술을 직렬 또는 병렬로 조합하여 사용하는 증폭기가 있다. 이러한 증폭기 모두에 대해서 실험적인 보고는 많이 있었으나, 내부의 에너지 준위가 복잡하여 증폭 기제가 복잡하고, 실험 파라미터를 측정하기가 어려워서 광대역증폭기의 성능을 예측하기 어려운 점이 있었다. 게다가 이러한 상황에서 광대역증폭기에 대한 해석적이거나 수치해석적인 심도깊은 연구가 부족하여 앞으로 증폭기를 다양하게 응용하기 위한 성능의 예측이 어려울 것으로 보인다. 이는 광대역 증폭기 기반의 전송 시스템을 성공적으로 적용하는데 제한을 줄 것이다. 따라서 본 논문에서는 광대역 증폭기(C/L밴드 EDFA, 라만 증폭기, TDFA)에 대한 실험적인 분석뿐만 아니라 해석적, 수치해석적인 분석 방법까지 그 응용의 예와 함께 소개할 것이다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.111-112
• /
• 2010

21C 정보화 사회를 맞이하여 디지털 부하의 사용이 급격히 증가하고 있다. 뿐만 아니라 친환경 녹색성장의 일환으로 풍력, 연료전지, 태양광과 같은 신재생 에너지원을 이용한 발전 시스템도 증가 하고 있다. 이에 따라 교류에 비하여 신뢰도가 높고, 저손실의 전원 시스템을 구축할 수 있는 직류급전시스템의 필요성이 부각되고 있다. 직류급전시스템에 있어 효율성, 신뢰성, 전송능력 등이 고려되어야 하지만 직류 배전의 상용화를 위해서는 직류 전용 보호차단기 등을 개발하여 보급하여야 한다. 미국의 통계에 따르면 아크사고는 전기화재의 큰 요인으로 꼽히고 있다. 이미 교류 아크의 검출 알고리즘이 다방면으로 연구되어 아크차단기(AFCI)가 개발되었으며 미국의 경우 AFCI 사용을 법제화 하고 있다. 따라서 직류급전시스템에서의 아크 검출을 위해 직류 아크의 특성을 분석한다.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.2
• /
• pp.56-63
• /
• 2013

Daylighting system is an alternative lighting system using daylight collecting device, light transformer and light diffuser. In this paper, we developed a daylighting system in which the collecting device composed by dual parabolic reflectors, the silica optical fiber adapted to the light transformer and light diffuser made of the polyglass square sheet. We have estimated the system efficiency and general color rendering index(Ra) of the developed system. The system efficiency measured to 23.8% and Ra was revealed as 95. Ra number of the developed system is bigger than the number(65) of the previous fresnel lens based sunlight collector.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.150-156
• /
• 2024

One of the key factors in research regarding long-distance laser beam propagation, as in free-space optical communication or laser power transmission, is the transmission efficiency of the laser beam. As a way to improve efficiency, we perform extensive numerical simulations of the effect of modifying the laser beam's profile, especially replacing the fundamental Gaussian beam with a super-Gaussian beam. Numerical simulations of the transmitted power in the ideal diffraction-limited beam diameter determined by the optical system of the transmitter, after about 1-km propagation, reveal that the second-order super-Gaussian beam can yield superior performance to that of the fundamental Gaussian beam, in both single-channel and coherently combined multi-channel laser transmitters. The improvement of the transmission efficiency for a 1-km propagation distance when using a second-order super-Gaussian beam, in comparison with a fundamental Gaussian beam, is estimated at over 1.2% in the singlechannel laser transmitter, and over 4.2% and over 4.6% in coherently combined 3- and 7-channel laser transmitters, respectively. For a range of the propagation distance varying from 750 to 1,250 m, the improvement in transmission efficiency by use of the second-order super-Gaussian beam is estimated at over 1.2% in the single-channel laser transmitter, and over 4.1% and over 4.0% in the coherently combined 3- and 7-channel laser transmitters, respectively. These simulation results will pave the way for future advances in the generation of higher-order super-Gaussian beams and the development of long-distance optical energy-transfer technology.