• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.508-510
• /
• 1995

A fiber-optic pressure sensor is fabricated with a photoelastic glass material. To remove the influence of external pertubation along the optical fiber, a new referencing technique is proposed by using two light sources. LED with 870nm wavelength is used as light source for reference signal, and LED with 660nm wavelength is used as light source for modulation signal. The fiber-optic pressure sensor system shows good linearity within the pressure range of 0 to 5 $kg/cm^2$.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1995년도 광학 및 양자전자학 워크샵 논문집
• /
• pp.201-209
• /
• 1995

광의 초고속성의 본질을 이용한 시간다중 공간분할 광교환 시스템이 처음으로 구현되었다. 단순한 공간분할 광교환방식에 비해 뛰어난 확장성과 간단한 하드웨어로 화상 및 음성신호의 지점대 지점간의 교환 및 멀티 캐스팅의 서비스가 가능하다. 스위칭 사간, 수용 가입자 수, 동기분제, 손실과 광출력의 분배, 광압축 등을 통하여 본 시스템의 특성을 분석해 본다.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.110-115
• /
• 2005

A novel technique for fine particle beam focusing under the atmospheric pressure is introduced using a radiation pressure assisted aerodynamic lens. To introduce the radiation pressure in the aerodynamic focusing system, a 25m plano-convex lens having 2.5mm hole at its center is used as an orifice. The particle beam width is measured for various laser power, particle size, and flow velocity. In addition, the effect of the laser characteristics on the beam focusing is evaluated comparing an optical tweezers type and pure gradient force type. For the pure aerodynamic focusing system, the particle beam width was decreased as increasing particle size and Reynolds number. Using the optical tweezers type, the particle beam width becomes smaller than that of the pure aerodynamic focusing system about $16\%,\;11.4\%\;and\;9.6\%$ for PSL particle size of $2.5{\mu}m,\;1.0{\mu}m,\;and\;0.5{\mu}m$, respectively. Particle beam width was minimized around the laser power of 0.2W. However, as increasing the laser power higher than 0.4W, the particle beam width was increased a little and it approached almost a constant value which is still smaller than that of the pure aerodynamic focusing system. For pure gradient force type, the reduction of the particle beam width was smaller than optical tweezers type but proportional to laser power. The radiation pressure effect on the particle beam width is intensified as Reynolds number decreases or particle size increases relatively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1505-1509
• /
• 2004

A novel technique for fine particle beam focusing under the atmospheric pressure is introduced using a radiation pressure assisted aerodynamic lens. To introduce the radiation pressure in the aerodynamic focusing system, a 25 mm plano-convex lens having 2.5 mm hole at its center is used as an orifice. The particle beam width is measured for various laser power, particle size, and flow velocity. In addition, the effect of the laser characteristics on the beam focusing is evaluated comparing an Ar-Ion continuous wave laser and a pulsed Nd-YAG laser. For the pure aerodynamic focusing system, the particle beam width was decreased as increasing particle size and Reynolds number. For the particle diameter of 0.5 ${\mu}m$, the particle beam was broken due to the secondary flow at Reynolds number of 694. Using the Ar-Ion CW laser, the particle beam width becomes smaller than that of the pure aerodynamic focusing system about 16 %, 11.4 % and 9.6 % for PSL particle size of 2.5 ${\mu}m$, 1.0 ${\mu}m$, and 0.5 ${\mu}m$ respectively at the Reynolds number of 320. Particle beam width was minimized around the laser power of 0.2 W. However, as increasing the laser power higher than 0.4 W, the particle beam width was increased a little and it approached almost a constant value which is still smaller than that of the pure aerodynamic focusing system. The radiation pressure effect on the particle beam width is intensified as Reynolds number decreases or particle size increases relatively. On the other hand, using 30 Hz pulsed Nd-YAG laser, the effect of the radiation pressure on the particle beam width was not distinct unlike Ar-Ion CW laser.

• 한국광학회지
• /
• 제11권4호
• /
• pp.227-231
• /
• 2000

세슘오븐에서 방출되는 열원자빔에 대해 횡방향 냉각을 실시하여 원자빔을 집속하였다. 이를 위해 원자빔의 진행방향에 수직으로, 서로 반대방향으로 진행하는 $\sigma^+$와 $\sigma^-$의 원편광 레이저를 비추었다. 그 결과, 원자의 횡방향 속도 성분에 해당하는 온도를 430 mK에서 약 60 uK으로 냉각시킬 수 있었다. 그리고 서로 반대 방향에서 진행하는 냉각용 레이저광의 세기가 다를 경우와 원자빔에 자장을 가하는 경우에 원자빔의 공간적 분포가 달라지는 것을 관찰하였고, 도플러 냉각이론에 이용하여 정성적으로 설명하였다.

• 한국광학회지
• /
• 제7권1호
• /
• pp.24-27
• /
• 1996

790nm의 반도체 레이저를 이용하여 수용액 속에 잠겨있는 $3~4\mu\textrm{m}$크기의 yeast입자를 포획하는데 성공하였다. 포획된 입자는 2차원 평면과 3차원 공간의 이동에도 안정된 포획 상태를 유지하였다. 이 실험으로 레이저 광속이 매질과 입자의 표면에서 굴절할 때, 입자의 굴절률과 매질의 굴절률의 차에 의하여 생기는 광압의 존재를 확인하였다. 그리고 레이저 광속에 수직하게 입자를 움직이면서 레이저 광속에 수직한 방향의 포획력을 측정하고 레이저의 출력에 따른 변화를 연구하였다.

• 한국광학회지
• /
• 제12권6호
• /
• pp.437-445
• /
• 2001

We examine theoretically the properties of the force on Mie particles induced by evanescent fields at a system of multilayer films (including a metal film), at which the surface plasmon resonance is excited by a p-polarized plane electromagnetic wave. An expression of the surface plasmon-coupled evanescent fields produced in Kretschmann (or Sarid) geometry is expanded in terms of vector spherical wave functions, while multiple reflections between the Mie particle and the metal boundary are taken into account. The Cartesian components of the force on Mie particles by the evanescent fields are analytically formulated and numerically evaluated. The force components are increased by one or two orders of magnitude at metal boundaries over those at dielectric boundaries. As a result, we can confirm the possibility of stable manipulation or rotation of a finite-sized object by forces of surface plasmon-coupled evanescent fields.

• 한국통신학회논문지
• /
• 제22권12호
• /
• pp.2828-2833
• /
• 1997

본 논문에서는 시분할 다중화와 파장분할 다중화방식이 혼합된 광 ATM 스위치의 구조를 제안하였다. 제안된 구조의 광 ATM 스위치는 파장분할 다중화를 위한 도파로일 격자와 시분할 다중화를 위한 광압축기와 광파이버 지연선의 기본적인 모듈로 구성되어 있다. 다른 교환기 구조와 비교해 볼 때 제안된 스위치 구조는 하드웨어적으로 간단하고, 비용면에서도 매우 유리할 뿐더러 대 용량의 정보교환도 가능하기 때문에 광대역 종합정보통신망에 적합한 스위칭 시스템이다.