• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.429-434
• /
• 2004

An ophthalmic endoscope which is used in medical applications should have the total diameter less than 1 mm. Its image resolution is limited to 30∼40 lp/mm. Therefore, the image resolution is one of the most important factors to decide image quality of the ophthalmic endoscopic images. This study obtained high resolution and magnifying ophthalmic endoscopic images by a new optical design using a 0.23 pitch GRIN lens and high resolution fiber-optic image guide which has less than 5 ${\mu}{\textrm}{m}$ diameter microfibers. The resolutions of images from existing and from a new type of ophthalmic endoscope are measured and compared using a USAF resolution target.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.23-29
• /
• 2017

The packaged optical fiber Bragg grating sensors which were networked by multiplexing the Bragg grating sensors with WDM technology were investigated in application for the structural health monitoring of the marine trestle structure transporting the ship. The optical fiber Bragg grating sensor was packaged in a cylindrical shape made of aluminum tubes. Furthermore, after the packaged optical fiber sensor was inserted in polymeric tube, the epoxy was filled inside the tube so that the sensor has resistance and durability against sea water. The packaged optical fiber sensor component was investigated under 0.2 MPa of hydraulic pressure and was found to be robust. The number and location of Bragg gratings attached at the trestle were determined where the trestle was subject to high displacement obtained by the finite element simulation. Strain of the part in the trestle being subjected to the maximum load was analyzed to be ${\sim}1000{\mu}{\varepsilon}$ and thus shift in Bragg wavelength of the sensor caused by the maximum load of the trestle was found to be ~1,200 pm. According to results of the finite element analysis, the Bragg wavelength spacings of the sensors were determined to have 3~5 nm without overlapping of grating wavelengths between sensors when the trestle was under loads and thus 50 of the grating sensors with each module consisting of 5 sensors could be networked within 150 nm optical window at 1550 nm wavelength of the Bragg wavelength interrogator. Shifts in Bragg wavelength of the 5 packaged optical fiber sensors attached at the mock trestle unit were well interrogated by the grating interrogator which used the optical fiber loop mirror, and the maximum strain rate was measured to be about $235.650{\mu}{\varepsilon}$. The modelling result of the sensor packaging and networking was in good agreements with experimental result each other.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.423-430
• /
• 1994

We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit. Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and - 3 dB small signal response of more than 2.6 GHz. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of - 30.2 dBm was obtained through 47 km optical fiber transmission under the criterion of $1\times10^{-10}$ BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber. fiber.

• Korean Journal of Optics and Photonics
• /
• v.17 no.4
• /
• pp.366-370
• /
• 2006

An optical microphone incorporating a reflective diaphragm and a fiber-optic head was demonstrated. The diaphragm was made of a micromirror membrane which is suspended by a silicon bar connected to a frame, allowing fer a displacement induced by acoustic waves. A compact, simple optical head was implemented by exploiting a single multimode fiber. For the assembled microphone, the static characteristics were investigated to find the operation point defined as the optimum distance between the head and the diaphragm, and a flat frequency response with a variation of $\sim$2dB for the range of up to 2 kHz was accomplished.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.351-354
• /
• 2003

We present a 12.5-GHz interleaved bidirectional ultra-dense wavelength-division-multiplexing transmission over a conventional single mode fiber of 80 km achieving spectral efficiency as high as 0.8-bit/s/Hz. The beat-frequency-locking method is used to stabilize the channel frequency within $\pm$200 MHz error. To facilitate the identification of multiple beat frequency signals, we use a radio-frequency spectrum analyzer. The bidirectional transmission penalty is about 0.3 dB compared with the unidirectional transmission over the same fiber.

• Korean Journal of Optics and Photonics
• /
• v.21 no.5
• /
• pp.206-213
• /
• 2010

We fabricated and characterized a compact endoscopic catheter for optical coherence tomography. The optical delay line (ODL), composed of a cylindrical piezoelectric transducer (PZT) and an optical fiber, was operated with a 1 kHz sinusoidal driving wave in the time-domain. When the ODL was driven with a sinusoidal wave function, the axial scanning speed was 6 m/s and the axial acquisition rate was 2000 line/s at a depth of about 3 mm. Endoscopic OCT images of a human finger and earhole were successfully obtained with an image rate of ten frames per second.

• The Optical Journal
• /
• s.153
• /
• pp.47-62
• /
• 2014

${\blacksquare}$ 목적 * 우리나라 주력산업분야(자동차, 조선, 항공, 기계, 로봇, 반도체 등)에 절단, 가공, 용접, 리소그라피, 마킹, 열처리, 합성, 표면처리 등의 방식으로 활용되고, 융 복합산업(의료, 에너지, 영상, 군수, 신소재, 센서)에 광원으로 응용되는 산업용 고출력 레이저의 산업 생태계 분석을 통하여 기존 산업의 고부가화와 신산업의 경쟁력을 견인 ${\blacksquare}$ 주요현황 * (시장현황) 2011년부터 2014년까지 고출력 레이저의 시장규모는 4,452백만불(5조 463억원)에서 5,255백만불(5조 9,565억원)으로 연평균 5.7% 성장 전망 * (제품기술동향) 3세대 레이저인 광섬유 레이저와 고출력 다이오드 레이저, DPSS 레이저 등이 기술혁신을 거듭하면서 1, 2세대 레이저를 대체해 가면서 높은 수준의 성장을 거듭할 것으로 전망. 산업용레이저의 주요선진국 대비 국내 기술수준은 전체적으로 44.5%정도로 취약 * (기업동향) Coherent, Trumpf, Cymer, IPG Photonics, Rofin-Sinar 5개사가 전체시장의 55%이상을 점유하고 있으며 대부분 수직계열화를 통해 경쟁력 확보. 최근 중국의 Han's 사가 자국정부의 지원을 통해 급 부상 ${\blacksquare}$ 시사점 * 산업용 레이저를 이용한 응용기술 부분 투자가 과거에는 단기 경제적 성취는 이로웠으나, 현재에 이르러 레이저 혹은 레이저 시스템이 필요할 때마다 외국에서 관련 핵심부품, 모듈 등을 수입해야하는 실정에 이르렀음. 향후 레이저 국산화를 위한 노력과 함께 후방 소재.부품의 전략적 투자를 통해 산업의 건강한 선순환생태 환경을 조성하여 산업 경쟁력을 갖추어야 함.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.151-154
• /
• 2002

All-optical OR logic gate is realized by use of gain saturation and wavelength conversion in the semiconductor optical amplifiers (SOA). It is operated by the nonlinearity of the SOA gain and hence to obtain the sufficient gain saturation of the SOA, pump signals are amplified by an Er-doped fiber amplifier (EDFA) at the input of the SOA. The operation characteristics of all-optical OR logic gate are successfully measured at 2.5 Gbit/s.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.235-239
• /
• 2002

A novel ultra-narrow linewidth DFB laser in the extended FBG ring cavity having kHz linewidth is presented. The method of linewidth compression was realized by introducing an extended fiber ring cavity into the cavity between the external FBG and the Bragg grating inside a DFB laser diode. Optimum optical feedback control was achieved by using an optical circulator and a variable optical attenuator to prevent mode hopping induced by spatial hole burning. To prove the validity of the proposed scheme, a self-heterodyne measurement set-up with fiber delay line of 63 km was utilized for the ultra-narrow linewidth measurement. A 3 dB linewidth of less than 3 kHz was demonstrated, which is resolution limited performance. This linewidth is equivalent to 3 dB linewidth of 2$\times$10$^{-8}$ nm.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.240-244
• /
• 2002

We proposed a novel temperature sensor based on the phenomena that the phase difference between principal polarization states in an optical retarder is a function of temperature. The polarization state of an optical beam is changed as it passes through the optical retarder, with the change dependent on the temperature. The temperature of the optical retarder is determined by comparison of the power difference between principal polarization states. A temperature sensor was successfully implemented using a polarization maintaining fiber of length 100 mm as the optical retarder. The change rate of phase difference on temperature was 0.236$^{\circ}C$$_{-1}$ and the measurement error was $\pm$0.038$^{\circ}C$ over the temperature region of -2.6$^{\circ}C$~3.4$^{\circ}C$.