• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.326-332
• /
• 1994

Performance of soliton based long-haul optical communication system with in-line optical amplifier repeaters are evaluated numerically. To reduce the optical amplifier noise, the amplifier gain is increased and the post amplifier loss is included. By theoretical calculation with 1480 nm co propagating pump, 7 dB amplifier gain and operating the amplifier 1 dB in compression, the spontaneous emission factor can be reduced from 2.37 to 1.45 by increasing the pump power from 3.71 to 11.53 mW and increasing the post amplifier loss from 0 to 10 dB. Then, power penalty can be reduced from 4.09 to 1.20 dB for 8,000'km transmission and the maximum transmission distance is 14,890 km. ,890 km.

• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.123-126
• /
• 1998

We derived an equation showing the temperature dependence of the zero-dispersion wavelength and measured the temperature dependence of the zero dispersion wavelength using four-wave mixing in dispersion shifted fibers in the range of $22^{\circ}C-59^{\circ}C$ From the experimental results, we found that the zero-dispersion wavelength is increased as the temperature around DSF increases and its temperature dependence is 0.032 nm/$^{\circ}C$. Also, the calculated behavior of FWM efficiency coincided with the experimental result.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.464-473
• /
• 1993

The dynamics of phase grating formation with visible light in an optical fiber is investigated. Adopting a simple two-photon local bleaching model, it is shown that the grating self-organize into an ideal grating, where the writing frequency is always in the center of the local band gap, as it evolves. The evolution at each point in the fiber is described in terms of a universal parameter that reduces the coupled partial differential equations describing the system to ordinary differential equatior~s. These equations are used to prove that there exists a fixed point of the grating growth process that corresponds to a perfectly phase-mached grating.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.490-493
• /
• 2005

We have experimentally studied supercontinuum generation in a photonic crystal fiber as a function of pump wavelength and intensity with 100 fs pulsewidth. A supercontinuum over 750 nm spectral width with amplitude variation less than 10 dB has been achieved. It was generated by coupling femtosecond pulses from a mode-locked Ti:Sapphire laser into a 2 m long photonic crystal fiber. Adjusting the parameters of the pump source, it was also possible to control different spectral features of the supercontinuum radiation.

• Korean Journal of Optics and Photonics
• /
• v.6 no.4
• /
• pp.365-372
• /
• 1995

A signal processing technique for interferometric fiber-optic sensors is proposed. It does not require a any special optic components such as phase modulator, $3times3$ couplers,to obtain the full sensitivity of the interferometer. Instead, it requires a reference interferometer for phase referencing and a reference mirror for intensity referencing, but intensity referencing can be done without using the r reference mirror. The new technique utilizes the frequency chirping of the laser diode to process t the sensor signal with both wide dynamic range and high sensitivity of the interferometer. It was a applied to an internal-mirrored FP interferometric temperature sensor to obtain the system noise of $4\times10^{-3\circ}C$ from I cm FP Interferometor sensor device.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.44-49
• /
• 2007

We have transferred a narrow-linewidth $1.5{\mu}m$ laser beam through a 525 m fiber network with excellent transfer stability. The fiber-induced optical phase noise during the fiber transmission is cancelled by configuring a noise-canceling servo. The transfer instability was $2{\times}10^{-17}$ at 1 s of averaging time. We quantitatively analyzed the transferred optical frequency in the frequency domain and in the time domain.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.1-4
• /
• 2011

A new fabrication technique of long-period fiber gratings with periodically surface-etched structures is proposed. Transmission characteristics of the periodically surface-etched long-period fiber gratings are improved by changing strain because of variation of coupling strength between the core and the cladding modes. The sensitivities of the periodically surface-etched long-period fiber gratings to strain, torsion, and ambient refractive index were measured. The strain and the torsion sensitivities were measured to be $-0.033\;dB/\mu\varepsilon$ and -1.30 nm m/rad, respectively. The ambient index sensitivity was measured to be -31.33 nm/RIU from a range from 1.33 to 1.42.

• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.58-63
• /
• 2013

A theoretical analysis of the impact of rise time of a Q-switch on the output pulse performance is carried out in an Ytterbium-doped actively Q-switched fiber laser. The finite difference time domain (FDTD) method is used to numerically simulate the Q-switched fiber laser. It is shown that stable Gaussian-like pulse shape can be generated when the Q-switch rise time is increased and pulse repetition rate is enlarged.

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.143-148
• /
• 2006

A new method of measuring the Brillouin gain spectrum of optical fiber is proposed and demonstrated. Unlike existing methods, both the pump light and the counter-propagating probe light are generated from a single laser diode whose optical frequency is directly modulated by injection current modulation. The frequency difference between the pump and the probe is scanned continuously through optical frequency chirp occurring when the injection current is modulated with a square wave. The measured Brillouin gain spectrum of telecom single-mode fiber agrees well with that shown in other literature.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.273-278
• /
• 1999

A TDM-multiplexed fiber optic pressure/temperature sensor system utilizing fiber optic Fabry-Perot interferometers as sensing devices was developed and applied to measure water level variations and temperature variations. The maximum measurement speed of the system without saving measurement data is 4500 times per second and the response time of the sensors is thought to be ~ms. The difference between the theoretical value and the measured value for the scale factor of water level sensor and temperature sensor was +13.7%, -18% respectively. The nonlinearity of the sensors after calibration was less than 1%. The sensor system was applied to verify the capability of measuring the temperature variations and water level variations at a high speed.