• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.31-37
• /
• 2006

Strongly motivated by the need for significant reduction in the optics-to-antenna interface circuitry used in a Photonically controlled array, it has proposed the design development of a novel 'true photonic antenna' consisted of optical fiber and micro-strip antenna. To clarify the design capability of the geometry, modal transmission-line theory including the discontinuity property between circular i,nd planar guiding structures is defined, md the optical power coupling of a slot-coupled microstrip antenna directly fed from an optical fiber using photoconductive effect is evaluated numerically. The numerical results reveal that the maximum power transfer between the two different guiding structures occurs at a new point in which the guiding powers of two rigorous modes are equally partitioned.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.230-235
• /
• 1997

Coupling loss variation as the shape of fiber ends and the fiber arrangement in a fiber Fabry-Perot cavity, formed with two optical fibers with dielectric mirror coatings on their ends, is analyzed. For the intended features it is assumed that one of two fibers is processed to have a concave mirror whose curvature is the same as that of the wavefront of the Gaussian beam from the first fiber. In this assumption, it was turned out that the coupling loss at the cavity length of 15 ${\mu}{\textrm}{m}$ is less than 0.5% even with tilt angle of 0.2$^{\circ}$, curvature error of 70 ${\mu}{\textrm}{m}$, cavity length error of 8 ${\mu}{\textrm}{m}$, and lateral alignment error of 0.5 ${\mu}{\textrm}{m}$. Thus, low loss and high-finesse fiber Fabry-Perot filters whose cavity length is greater than several ${\mu}{\textrm}{m}$ can be obtained easily if the receiving fiber end is properly formed.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.74-75
• /
• 2000

WDM(wavelength-division multiplexing) 광통신 네트웍을 이루는 핵심기술중의 하나는 ADF(Add-drop Filter)의 구현에 있다. 광섬유격자와 여러형태의 구조를 이용한 ADF들 중에서도 비대칭 결합기와 광섬유 격자를 이용한 구조는, 간섭계 구조가 아니기 때문에 제작이 용이하고 보다 안정된 특성을 보일 것으로 기대되어 많은 관심을 갖게 하고 있다$^{(1)}$ . 비대칭 결합기 구조의 경우, 두 광도파로의 코어반경이나 굴절율 분포가 서로 다르기 때문에, 일반적으로 광파의 결합이 일어나지 않는다. 그러나 브래그 격자의 반사조건을 만족하는 파장성분의 경우 입력단(input port)에서 드롭단(drop port)으로 반사되어 나오고, 그 외의 파장성분은 출력단(Output port)으로 나오게 되어 드롭 기능을 수행하게 된다. 비슷한 원리로 add port에서 출력단으로의 add 기능도 수행된다. 본 논문에서는 연산자 분리 시영역 모델$^{(2)}$ 을 이용하여 비대칭구조에서의 파장응답 특성을 해석하였다. 또한 최적화를 위한 조건을 알아 보고, 소자 설계에 필요한 파라미터를 정의하여 최적설계에 필요한 파라미터를 구하였다. (중략)

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.18-23
• /
• 2007

This paper presents a transmissive dispersion compensator based on tilted chirped fiber Bragg grating pairs which happen mode coupling between core mode and cladding mode. And, as a result of simulation, the phase matching condition and optimum tilted angle to maximize the mode-coupling in the dispersion compensator are shown and the dispersion slope and bandwidth in the proposed dispersion compensator is respectively 3,068ps/nm and 0.45nm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.4
• /
• pp.278-285
• /
• 1990

It is well know that optical oupler that is composed of the polished single-mode optical fiber can separate two arbitrary wave lengths. Wavelength division ranges of the WDM optical coupler that is made of the bending fiber with radius R vary with the center wavelength of the signal and spacing between two cores. In this paper, when optical fiber is fixed with the radius R, We proposed the spacing between two cores that can provide minimum division range. Also, We proposed the minimum radius R necessary to separate two arbitary wavelengths of the signal.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.252-253
• /
• 2000

본 논문은 광통신 파장(1.3$mu extrm{m}$)에서 측면 연마된 광섬유와 열광학 평면도파로 결합기의 온도변화에 따른 광의 세기변화를 이용한 광섬유형 온도센서에 관한 연구이다. 본 연구에서 제안된 소자는 광통신영역에서 변화를 가지기 때문에 원거리 측정이 가능하고 열광학 평면도파로의 물질의 선택과 소자의 구조에 따라 넓은 온도감지 범위와 높은 분해능을 가지는 소자의 구현이 가능하다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.12-13
• /
• 2000

광섬유형 센서는 전자기 간섭에 강하고 높은 감도와 원거리측정 등의 장점이 있어 이에 대한 연구가 활발하게 진행되고 있다. 온도센서의 경우 다양한 구조의 센서 구현이 용이하고 넓은 온도범위에서의 측정이 가능하다. 하지만 이러한 광섬유형센서는 대부분 온도변화를 물리량의 변화로 감지하기 때문에 작은 온도의 감지에는 구조적인 한계를 가지는 경우가 많으며 이러한 문제점을 개선하기 위하여 많은 연구가 시도되고 있다$^{[1]}$ . 본 논문은 이러한 점을 인지한 측면연마된 광섬유와 평면도파로 결합기형 고감도 온도센서에 관한 연구이다. 본 연구에서는 온도의 감지를 열광학 평면도파로의 열광학계수에 의존하기 때문에 물질의 변화에 따라 다양한 온도감도 조절과 높은 분해능을 가지는 센서의 구현이 가능하다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.218-222
• /
• 2020

In this paper, we have experimentally demonstrated a 2-kW-class spectrally-beam-combined laser with high beam quality, using narrow-linewidth ytterbium-doped polarization-maintaining fiber amplifiers. Five fiber amplifiers with different center wavelengths were implemented for the spectrally-beam-combined laser. The center wavelengths of the five amplifiers were 1062, 1063, 1064, 1065, and 1066 nm, respectively. A phase-modulated laser diode was used as a seed source for each amplifier. The seed sources were modulated by filtered pseudorandom-bit-sequence (PRBS) signals 5 GHz in linewidth. The polarization-maintaining large-mode-area fiber with a core size of 30 ㎛ was used as a delivery fiber to mitigate the stimulated Brillouin scattering (SBS) effect. The laser beams from five amplifiers were spectrally combined by a multilayer dielectric diffraction grating. The maximum output power and beam quality M² of the combined laser were measured to be 2.3 kW and 1.74, respectively.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.245-251
• /
• 2022

We have developed a multi-channel fiber laser for tiled laser beam combining and a laser output array system for multi-beam alignment. The fiber laser is a master oscillator power amplifier configuration that has a common seed, a preamplifier, and a 7-channel amplifier. The output power of each channel is more than 10 W. The laser output array system is a packed cylindrical configuration for a high fill-factor, and it has capabilities for collimation and tilt control with built-in PZT. Multi-beam alignment to a target is successfully implemented using PZT controlled with a stochastic parallel gradient descent (SPGD) algorithm.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.178-184
• /
• 1998

Optical fiber coupler is a crucial optical passive component for optical transmission systems. In this paper, we fabricate wavelength insensitive optical coupler(WIC), of two types for which the processing procedures are complicate and difficult. These couplers are fabricated by two optical fibers having either different fiber parameters or different cladding diameters. To clarify the validity, we measure the optical characteritics and compare to the data of theoretical simulation. The experiment results ref#eat that it has uniformity of about 1.0 dB and excess loss of less than 0.1 dB in the range of $1310{\pm}40nm\;and\;1550{\pm}40nm$.