• Journal of Sensor Science and Technology
• /
• v.13 no.5
• /
• pp.350-355
• /
• 2004

A novel UV sensor was manufactured and characterized using the evanescentfield coupling between fiber-planar waveguide (PWG) coupler and prism. A spiroxazine dye was chosen as planar waveguide because its photochromic isomerization induced by UV irradiation. A novel UV sensor was proposed to measure the variation of refractive index and absorption coefficient simultaneously. The wavelength responses of these sensors by UV exposure times were measured 0.48 nm/sec, 0.757 nm/sec, and ATR output power variations were measured $-0.424{\mu}W$/sec and $-0.62{\mu}W$/sec when UV exposure power were 3 mW and 5 mW, respectively.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.235-239
• /
• 2002

A novel ultra-narrow linewidth DFB laser in the extended FBG ring cavity having kHz linewidth is presented. The method of linewidth compression was realized by introducing an extended fiber ring cavity into the cavity between the external FBG and the Bragg grating inside a DFB laser diode. Optimum optical feedback control was achieved by using an optical circulator and a variable optical attenuator to prevent mode hopping induced by spatial hole burning. To prove the validity of the proposed scheme, a self-heterodyne measurement set-up with fiber delay line of 63 km was utilized for the ultra-narrow linewidth measurement. A 3 dB linewidth of less than 3 kHz was demonstrated, which is resolution limited performance. This linewidth is equivalent to 3 dB linewidth of 2$\times$10$^{-8}$ nm.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.4
• /
• pp.106-112
• /
• 1997

We demonstrate a novel wavelength -division add/drop multiplexer employing fiber bragg gratings and polarization beam splitters. the multiplexer is easy to fbricate without any special technique such as UV trimming, and yet shows very stable performance with less than 0.3-dB crosstalk power penalty in a 0.8-nm-spaced, 2.5Gbps-per-channel WDM transmission system. We find that the rejection of adjacent channels is more than -6dB, and the signal leakage through output port is less than -34dB.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.323-329
• /
• 2015

The compensation characteristics of the distorted WDM channels compensated for by dispersion management (DM) and optical phase conjugation in the long-haul ($50\;fiber\;spans{\times}80km$) transmission link with the randomly distributed single mode fiber (SMF) length and residual dispersion per spans (RDPS) for implementing of the flexible link configuration are investigated. It is confirmed that the compensation effect in the link with the randomly distributed SMF length and RDPS is similar with that in the link with the uniform distribution, when the launch power of WDM channels are restricted within 0 dBm. This result means that the proposed link configuration is useful for designing and deploying the long-haul WDM transmission link.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.340-346
• /
• 2000

Traveling wave type semiconductor optical amplifiers integrated with spot-size-converter (SSC-TW-SOA) have been extensively studied for the improvement of coupling effiClency With single-mode fiber and fO! the cost reducClon 111 a packaging In tlIis paper the slructural dependence of the spot-slZe-converter on the effective facet reflectlvllY $R_{eff}$ was experimentally as well as thcoretienlly mvestlgated. It was shown that not only a sufficient mode-conversion in a sse region along the latersl and tran~verse directions but also an introductIOn of angled-facet were very essential in order to reduce $R_{eff}$ Very small ripple less than 0.1 dB in an amplified spontaneous emission spectrum was observed with the fabncated SSC-lW-SOA which consists of the wrndow length of $20\mu\textrm{m}$, facet angle of $7^{\circ}$, and antlrelleetioll-coated facet of ] % reflectivity.tivity.

• Journal of Life Science
• /
• v.21 no.1
• /
• pp.159-164
• /
• 2011

Microbial whole-cell biosensors can be excellent analytical tools for monitoring environmental pollutants. They are constructed by fusing reporter genes (e.g., lux, gfp or lacZ) to inducible regulatory genes which are responsive to the relevant pollutants, such as aromatic hydrocarbons and heavy metals. A large spectrum of microbial biosensors has been developed using recombinant DNA technology and applied in fields as diverse as environmental monitoring, medicine, food processing, agriculture, and defense. Furthermore, their sensitivity and target range could be improved by modification of regulatory genes. Recently, microbial biosensor cells have been immobilized on chips, optic fibers, and other platforms of high-throughput cell arrays. This paper reviews recent advances and future trends of genetically modified microbial biosensors used for monitoring of specific environmental pollutants.

• Korean Journal of Optics and Photonics
• /
• v.14 no.6
• /
• pp.578-582
• /
• 2003

We propose a novel structure of wavelength selective optical add/drop module comprising two tap couplers and a fiber Bragg grating. The device has unique features including a simpler structure and a lower cost of implementation as compared with existing devices for the same operation. The module performance has been measured and analyzed experimentally. The implemented prototype module shows good performance with no-crosstalk power penalty in a 155 Mbps per channel wavelength-division-multiplexing transmission system but suffers from a relatively high loss of 3.5 ㏈ and 21 ㏈ for transmitted and dropped channels, respectively. While the dropped channel extinction ratio was more than 25 ㏈, the transmitted channel extinction ratio was more than 35 ㏈.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.8
• /
• pp.123-130
• /
• 2019

Recently, it is required to develop a monitoring technology that combines an FBG sensor as a means for continuously monitoring whether reinforcing effect of FRP is maintained on FRP reinforced structural members. However, most existing researches focus on the insertion of FBG sensors into bar-shaped FRPs, and there is insufficient study on the details strip-type FRPs combined with FBG sensors. Therefore, in this paper, it is studied to develop a reinforcement in which a FBG sensor is combined with a FRP strip. Especially, combination of FRP and FBG sensor. For this, a series of experiments were performed to find the adhesive strength of fiber-FRP-epoxy joints, the tensile strength of FBG sensor part with reflection-lattice, and the performance depending on the connection method of FRF and FBG sensor. As a result of the study, it was found that a minimum strength of $216.15N/mm^2$ is required for incorporating FBG sensors in FRP using epoxy. It is considered that the adhesion length of epoxy joints should be more than 50mm. When the FBG sensor is attached to the FRP strip as an epoxy, it is considered appropriate to use the complete attachment and the sensor non-attachment method.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.271-278
• /
• 2000

We have fabricated and analyzed the lasing characteristics of 1.3$\mu\textrm{m}$ Spot-Size-Converter (SSC) integrated Fabry-Perot (FP) laser diodes, which are very promising light sources for optical subscriber networks. SSC-LDs has been developed by BIB (buttjoint-built-in) coupling and selective MOVPE growth. High-performances were achieved such as the slope efficiency from the SSC facet of 0.23-0.32 mW/mA, the full-width at the half maximum of the far-field pattern (FFP) of 9.5$^{\circ}$~12.3$^{\circ}$, the alignment tolerances of $\pm$2.3$\mu\textrm{m}$ and $\pm$2.5$\mu\textrm{m}$ within the extra-coupling loss of 1 dB for the vertical and parallel directions, respectively. These experimental results were compared to theoretical ones in order to clarify the operational problems and give a good design direction of the fabricated SSC-LDs. It was revealed that an asymmetric output power from the facets, an irrelevancy of FFP and the waveguide structure around SSC facet region, and a poor temperature characteristics were originated from the scattering in the BIB and SSC sections and SHB effect in the active section for the first time.t time.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.423-430
• /
• 1994

We designed and fabricated the single mode fiber pigtailed DFB-LD module for 2.5 Gbps optical communication system. In the design of the DFB-LD module, we made the module divided into two parts of inner sub-module and outer 14-pin butterfly package and cylindrical shaped sub-module contain quasi confocal 2 lens system including optical isolator and electrical connection between these parts via hybrid substrate of bias T circuit. Laser welding was used to assemble the sub-module which requires accurate fixing between optical elements. The fabricated DFB-LD module showed optical coupling efficiency of 20% and - 3 dB small signal response of more than 2.6 GHz. We confirmed mechanical reliability of the module by temperature cycle test where the tested module exhibit optical power fluctuation of less than 10%. Finally we evaluated the performance of the fabricated DFB-LD module as light source of 2.5 Gbps optical communication system, sensitivity of - 30.2 dBm was obtained through 47 km optical fiber transmission under the criterion of $1\times10^{-10}$ BER and transmission penalties were 1.5 dB caused by extinction ratio and 1.0 dB caused by chromatic dispersion of normal single mode fiber. fiber.