• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.160-165
• /
• 1993

1980년 중반에 완공된 광양 제철소의 철광석 운반하역을 위한 광양항에는 25만톤급 광석 운반선이 출입하고 있으며 광양만 내역에는 광양콘테이너 부두가 건설중에 있고 호유부두, 원료 및 CTS부두, 중흥부두등에 많은 대형선박들이 빈번히 출입하고 있어 여수 해만 입구로 부터 광양만 내역에 이른 접근 수로에 대한 신뢰성 있는 조석 예보가 실시간적으로 제공되어야할 필요가 집중되고 있다. (중략)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.223-227
• /
• 2005

In adjacent sea areas of Yeosu, there are many crossing traffics between eastbound and westbound vessels. Traffic congestion is increasing in sea area of east Sori island and near Yokji Island. In this research, we established TSS near Yeokmando Areas and new recommended route which connected to Seopdo west recommended route to reduce meeting traffic between eastbound vessels and westbound vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.2 s.25
• /
• pp.133-137
• /
• 2006

In adjacent sea areas of Yeosu, there are many crossing traffics between eastbound and westbound vessels. Traffic congestion is increasing in sea area of east Sori island and near Yokji Island. In this research, we established TSS near Yeokmando Areas and new recommended route which connected to Seopdo west recommended route to reduce meeting traffic between eastbound vessels and westbound vessels.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.85-92
• /
• 2015

In general, when ships are designed, structural strength and fatigue strength must be verified based on the relative rules respectively. In case of Slurry Iron Sand Carrier designed to carry Iron-Sand saturated at water content, there is no special consideration of fatigue strength analysis. However, this vessel is similar to Ore Carrier in consideration of the overall characteristics of loaded cargo and the shape of cargo hold. Therefore we verified fatigue strength based on fatigue analysis procedure of ore carrier in DNV Rules and carried out the study for improving of fatigue strength of Slurry Iron Sand Carrier.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.5
• /
• pp.305-311
• /
• 2020

This study presents a probabilistic time series forecast of ship structural response using Bayesian inference combined with Volterra linear model. The structural response of a ship exposed to irregular wave excitation was represented by a linear Volterra model and unknown uncertainties were taken care by probability distribution of time series. To achieve the goal, Volterra series of first order was expanded to a linear combination of Laguerre functions and the probability distribution of Laguerre coefficients is estimated using the prepared data by treating Laguerre coefficients as random variables. In order to check the validity of the proposed methodology, it was applied to a linear oscillator model containing damping uncertainties, and also applied to model test data obtained by segmented hull model of 400,000 DWT VLOC as a practical problem.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.84-89
• /
• 2005

The double hull VLCC(Very Large Crude Oil Tanker) have been designed to have each four(4) longitudinal bulkheads and transverse bulkheads in general. Actually, the inside longitudinal bulkheads among four(4) longitudinal bulkheads, which are extended up to the end of the aft cargo hold for continuity of the members, have been designed with knuckled type inboard due to the narrowed hull shape at bottom region, but sometimes the straight type of longitudinal bulkheads were adopted based on the degree of the hull lines shape. However, regardless the type of longitudinal bulkheads, inside and outside longitudinal bulkheads conflict each other in aft cargo hold region This makes the structure more complex thus giving difficulties to structural design and production. Recently, a vessel of straight type was reported to have cracks on bracket end and tripping bracket toe in aft cargo hold region. As a solution to this problem, in designing the first 60m Beam VLCC, DSME developed a new cargo hold structure which is good in production and structural point of view by structural strength and fatigue analysis of fore and aft cargo hold.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.3
• /
• pp.54-61
• /
• 1998

This paper presents a prediction method of natural frequencies of vertical hull girder vibration based on design sensitivity analysis in case of design modification and the variation of loading condition. The resented method premises the vibration analysis by the transfer matrix method. Governing sensitivity equation is derived from the direct differentiation of state vector and transfer matrix to parameters and its transfer over all the hull girder elements. Derivatives of natural frequencies and mode shapes are determined by two trial calculation of the governing equation. Using the derivatives, the changes of natural frequencies and mode shapes can be predicted when mass and stiffness parameter's are changed. As results, it is possible to optimize ship structure as well as to avoid troublesome calculation in hull girder vibration analysis rationally and efficiently. To verify the accuracy and efficiency of the resented method numerical results obtained by both the sensitivity analysis and the ordinary reanalysis far a real ore/bulk carrier in case of the change of mass and stiffness parameters are compared.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.27-37
• /
• 1995

A performance index is very important and indispensable to the evaluation of automatic steering system of ships in open sea from the viewpoint of energy saving. In this paper, we derive the performance index of automatic steering system from the concept of energy loss of propulsive power. The index is found to consist of three terms, energy loss due to elongation of sailing distance, energy loss due to steering, and energy loss due to yawing motion. We also provide two kinds of calculation method on the performance index ; frequency response analysis and digital simulation. The numerical calculations are carried out for an ore carrier and a fishing boat by both methods. The frequency response analysis is found to be useful if the system is linear and the disturbance on ship is not large. If the system is nonlinear or the disturbance is excessive, the method of digital simulation has to be applied for the accurate evaluation of the performance index. Further investigations into the effects of nonlinear elements such as weather adjuster, power unit etc. on the performance index, will be dealt with in another paper.