• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.27-35
• /
• 2017

A total of 22 sites around openings of limestone mine are chosen to assess rock mass classification schemes such as RMR, Q-system, and GSI. RMR and Q are modified to estimate the relationship with GSI. Q' is the modified Q with SRF=1.0 and $J_w=1.0$. Rock mass is assumed to be completely dry and very favorable discontinuity orientations are assumed to estimate ${RMR_{89}}^{\prime}$. Relationships of Q-Basic RMR, Q-Total RMR, ${GSI-RMR_{89}}^{\prime}$, and GSI-Q' are analyzed, in which a correlation of ${GSI-RMR_{89}}^{\prime}$ is found to be the highest. Failure strains are calculated using the modulus ratios and most measuring sites appear to be stable with low failure strain class.

• Tunnel and Underground Space
• /
• v.22 no.3
• /
• pp.163-172
• /
• 2012

As more diesel engines have been employed in underground limestone mines with large cross section, underground space environment is worsened by diesel exhausts and heat flow. This paper aims for the ultimate goal to optimize the work place environment through assuring the optimal required ventilation rate based on the analysis of the airflow, diesel exhaust gas concentrations and the effects of mechanization and deepening working face on temperature and humidity. Due to the insufficient capacity of the main exhaust fan and poor airway management, stagnant airflows were observed at various locations, while the flow direction was reversed instantly with passing diesel equipment and the flow reversal was also made by the seasonal variation of the outside surface weather. During the loading operation, CO concentration measurements were found to be frequently higher than the threshold limit of 50 ppm, and most of the $NO_2$ measurements during drilling and loading operations shows even more serious levels surpassing the permissible limit of 3 ppm. The actual ventilation quantity was considerably less than the required quantity estimated by the mine health and safety law, and this shortage problem was less serious in colder winter showing more effectiveness of the natural ventilation.

• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.38-58
• /
• 2018

The ventilation system plays a crucial role in underground mine safety. The main objective of the ventilation system is to supply sufficient air to dilute the contaminated air at working places and consequently provide tenable environment during the normal operation, while it also should be capable of controlling the fire propagation and facilitate rescue conditions in case of fire in mines. In this study, a smoke control fan was developed for the auxiliary ventilation as well as the fire smoke exhaust. It works as a free-standing auxiliary fan without tubing to dilute or exhaust the contaminated air from the working places. At the same time, it can be employed to extract the fire smoke. This paper aims to examine the smoke control efficiency of the fan when combined with the current ventilation system in mines. A series of the site experiments and numerical simulations were made to evaluate the fan performance in blind entry development sites. The tracer gas method with SF6 was applied to investigate the contaminant behavior at the study sites. The results of the site study at a large-opening limestone mine were compared with the CFD analysis results with respect to the airflow pattern and the gas concentration. This study shows that in blind development entry, the most polluted and risky place, the smoke fan can exhaust toxic gases or fire smoke effectively if it is properly combined with an additional common auxiliary fan. The venturi effect for smoke exhaust from the blind entry was also observed by the numerical analysis. The overall smoke control efficiency was found to be dependent on the fan location and operating method.

• Clean Technology
• /
• v.22 no.3
• /
• pp.168-174
• /
• 2016

The working environment is deteriorated due to a rise in temperature of a coal mine caused by increase of its depth and carriage tunnels. To improve the environment, the temperature distribution resulted by using the fan type ventilation system aiming for the temperature drop is calculated by using a fluid dynamic analysis program. The analysis shows that A coal mine needs 6,152 m³ min^-1 for in-flow ventilation rate but the total input air flowrate is 4,710 m³ min^-1, 1,442 m³ min^-1 of in-flow ventilation rate shortage and the temperature between the carriage tunnel openings and the workings with exhausting ventilation system type is 2~3 ℃ less than that with blowing ventilation system type. The exhausting ventilation system type would be more effective than blowing ventilation system when the distance between the carriage tunnel openings and the workings is relatively far.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.54-62
• /
• 2010

In order to obtain the basic data for recycling of coal mine tailings, the characteristics of coal mine tailings, the formation of AMD from the tailings and the leaching of heavy metal from the tailings were studied. The samples were characterized in terms of chemical composition, mineral composition and content of heavy metal of the tailings were investigated. The effects of time, temperature, content of pyrite, sulfide minerals on the formation of AMD were also investigated. For the leaching tests, the KS method, TCLP method and column test were used. From the investigated data, we can see that the coal mine tailings can be used as aggregate for filling used gallery. We can also see that the formation of AMD from coal mine tailings can be prevented by mixing 4% or more limestone with it.

• Tunnel and Underground Space
• /
• v.33 no.2
• /
• pp.95-107
• /
• 2023

In this study, the effect of repeated traffic vibration on the long-term stability of mine openings is analyzed for re-utilization of abandoned mine galleries. The research mine in this study is an underground limestone mine which is developed by room-and-pillar mining method, and a dynamic numerical analysis is performed assuming that the research mine will be utilized as a logistics warehouse. The actual traffic vibration generated by the mining vehicles is measured directly, and its waveform is used as input data for dynamic numerical analysis, As a results of dynamic numerical analysis, after 20,000 repetitions of traffic vibration, the mine openings is analyzed to be stable, but an increase in the maximum principal stress and an additional area of plastic zone are observed in the analysis section. As shown in the changes of displacement, volumetric strain, and maximum principal stress which are measured at the mine opening walls. It is confirmed that if the repeated traffic vibration is continuously applied, the instability of the mine openings can be increased. Authors expect that the results of this study can be used as a reference for basic study on utilization of abandoned mine.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.163-169
• /
• 1998

휴$\cdot$폐광에 따른 토양오염현상은 폐광의 광미사등에 축적된 중금속이나 화학처리제 등의 오염인자들이 용출수나 지하수, 강수 및 비산분진등에 의해 광범위한 지역으로 확산되는 것으로 알려져 있다. 특히 광산의 갱이나 광미사의 퇴적장으로부터 유출되는 유해 중금속들로 인한 토양오염은 주변하천의 농업용수를 오염시켜 농작물에 피해를 주게 되므로 작물의 생육에 지장을 가져올 뿐만 아니라 수확량이 감소되고 또 오염된 농작물을 섭취한 인간이나 동물들에게 만성적인 장해를 일으키기도 한다. (중략)

• Tunnel and Underground Space
• /
• v.27 no.1
• /
• pp.12-25
• /
• 2017

In local underground mines heavily depending on the natural ventilation, ducted fan auxiliary ventilation system is strongly recommended instead of the total mine ventilation system requiring large capital and operating costs. Optimizing the installation of ducted fans in series in long large-opening mines is required to assure the economy and efficiency of the ventilation system. The two most critical design parameters for optimization are the wall separation distance and gap length between adjoining ducts. This study aims at deriving the optimal values for those two parameters concerning the economic and environmental aspects through the extensive CFD analysis, which minimizes pressure loss, leakage and entrainment of the contaminated air in the gap space. The ranges of the wall separation distance and gap length for study are selected by taking into consideration the existing recommendations and guidelines. The ultimate goal is to optimize the auxiliary ventilation system using ducted fans in series to provide a reliable and efficient solution to maintain clean and safe workplace environment in local long underground mines.

• Economic and Environmental Geology
• /
• v.20 no.4
• /
• pp.289-303
• /
• 1987

당(當) 광산(鑛山)은 1936년(年) 금(金), 은(銀) 광종(鑛種)으로 출원(出願)하였다가 1940년(年) 망간을 추가(追加)하여 망간 광산(鑛山)으로 1975년(年)까지 Mn(30~35%) 110,000여(餘)톤을 생산(生産), 국내생산량(國內生産量)의 70%를 점(占)하였고 1976년(年) Mn광상(鑛床) 하부(下部)에 연(鉛), 아연(亞鉛) 유화광(硫化鑛)을 발견(發見), 현재(現在)까지 Pb十Zn=10% 이상(以上) 원광석(原鑛石) 500,000여(餘)톤을 처리(處理), 연정광(鉛精鑛)(Pb : 62%) 37,000여(餘)톤, 아연정광(亞鉛精鑛)(Zn : 46.5%) 37,000여(餘)톤, 유비광정광(硫砒鑛精鑛)(As : 30%) 5,000여(餘)톤을 생산(生産)하였다. 현재(現在) 일처리(日處理) 220톤 선광장(選鑛場)을 일처리(日處理) 400톤 규모(規模)로 증설계획중(增設計劃中)이다. 당(當) 광산(鑛山)에서 현재(現在)까지 시행(施行)한 갱외시추(坑外試錐)는 75개공(個孔) 18,500여(餘)m, 갱내시추(坑內試錐) 750개공(個孔) 40,000여(餘)m 갱도(坑道) 총연장(總延長) 13,000m에 달(達)하며 지표(地表)(623ML)로 부터 수직(垂直) 300m 하부(下部)까지 갱도(坑道)가 개착(開鑿)되어 있다. 당(當) 광산(鑛山)의 지질(地質)은 여러 조사서(調査書)에 의(依)하여 견해(見解) 차이(差異)를 보여주고 있으나 대체(大體)로 다음과 같은 쪽으로 인정되고 있다. 즉(卽) 본지역(本地域) 루층군(累層群)의 층순(層順)을 하위(下位)로 부터 상위(上位)로 향(向)하여 원남층(遠南層)${\rightarrow}$율리통(栗里統)${\rightarrow}$장산규암층(壯山珪岩層)${\rightarrow}$두음리층(斗音里層)${\rightarrow}$장군석회암층(將軍石灰岩層)${\rightarrow}$동수곡층(東水谷層)${\rightarrow}$재산층(才山層)의 순위(順位)로 보며 장산규암층(壯山珪岩層)과 두음리층(斗音里層)을 조선계(朝鮮系)의 양덕통(陽德統)으로, 장군석회암층(將軍石灰岩層)을 대석회암통(大石灰岩統)으로, 동수곡층(東水谷層)과 함탄층(含炭層)인 재산층(才山層)을 평안계(平安系) 지층(地層)으로 대비(對比)한다. 이들은 본지역(本地域) 북(北)쪽에서는 선(先)캠브리아기(紀)의 원남층(遠南層)과 율리통(栗里統)을 불정합(不整合)으로 덮고 남측(南側)에서는 재산층(才山層)과 원남층(遠南層)이 단층접촉(斷層接觸)하고 있다. 이들 지층(地層)의 주향(走向)은 $N60^{\circ}{\sim}80^{\circ}W$, $N60^{\circ}{\sim}80^{\circ}E$이며 경사(傾斜)는 대체(大體)로 $50^{\circ}{\sim}80^{\circ}N$이며 전체적(全體的)으로 역전(逆轉)된 층서(層序)를 보여주는 바 지질구조(地質構造)에 있어서 단사구조(單斜構造)인지 등사(等斜)습곡의 향사(向斜), 또는 등사(等斜)습곡이 배사구조(背斜構造)인지 아직 밝혀지지 않고 있다. 화성암체(火成岩體)는 본지역(本地域) 서측(西側)에 쥬라기(紀) 춘양화강암(春陽花崗岩)이 불규칙(不規則)한 실입(實入) 접촉면(接觸面)을 보여주며 시대미상(時代未詳)(백악기(白堊紀)?)의 거정화강암(巨晶花崗岩), 반화강암(半花崗岩)이 소암주상(小岩株狀)으로 몇 곳 실입(實入)하고 산성(酸性)~중성(中性)의 맥암(脈岩)과 염기성(鹽基性) 안산암질암(安山岩質岩)이 실입(實入)해 있다. 광상(鑛床)은 장군석회암층(將軍石灰岩層)에 배태(胚胎)되어 있는 열수교대(熱水交代) 연(鉛), 아연(亞鉛), 은등(銀等)의 혼합(混合) 유화광상(硫化鑛床)으로 다량(多量)의 Mn분(分)을 수반(隨伴)하며 지표부(地表部)에 Mn광상(鑛床)을 형성(形成)하고 있다. 광상(鑛床)의 형태(形態)는 괴상(塊狀), 각력(角礫)pipe상(狀), 맥상(脈狀)으로 나타난다. 광상(鑛床)의 성인(成因)과 생성시기(生成時期)에 대(對)하여 많은 논란(論難)이 있다. 즉(卽) 열수교대(熱水交代)냐, 접촉교대(接觸交代)냐, 동시퇴적기원(同時堆積起源)이냐, 또는 생성시기(生成時期)가 쥬라기(紀)인지 백악기(白堊紀)인지에 대해 이론(異論)이 있다. 본지역(本地域) 광상(鑛床)은 남본(南本), 100우(右), 북(北), 유비철(硫砒鐵), 동(東), 서(西), 재남(才南), 재동(才東), 110호(號) 등(等)이 지표(地表) Mn로두광화대(露頭鑛化帶)와 관련(關聯) 명명(命名)된 바 전(前)4자(者)는 하부(下部)에서 유화광상(硫化鑛床)이 확인(確認)되었으나 나머지 후자(後者)에서는 아직 하부(下部)에 유화광상(硫化鑛床)이 확인(確認)되지 않고 있으며 남본광상(南本鑛床)으로 부터 남동(南東) 300여(餘)m 지점에 장군석회암층(將軍石灰岩層)과 동수곡층(東水谷層) 경계부(境界部)에 Fe 55~60% 자철광상(磁鐵鑛床)이 확인(確認)된 바 신례미(新禮美) 자철광상(磁鐵鑛床)과 유사성(類似性)이 있는 것 같아 흥미(興味)롭다. 당(當) 광산(鑛山)의 현재(現在)까지의 탐광(探鑛)은 남본광상(南本鑛床) 지표로두(地表露頭)(Mn) 하부(下部)에서 확인(確認)된 연(鉛), 아연(亞鉛), 은(銀) 유화광체(硫化鑛體) 하부(下部)와 전탐(電探)에 의(依)해 확인(確認)된 북광체(北鑛體), 갱도접근중(坑道接近中)에 확인(確認)된 100우광체(右鑛體), 유비철광체(硫砒鐵鑛體) 등(等)의 하부(下部) 탐광(探鑛)을 주(主)로 하고 지표(地表) Mn로두(露頭) 하부(下部)에 대(對)한 시추탐광(試錐探鑛0을 병행(竝行)하고 있으며 시추(試錐)에 의(依)해서 지표(地表)로 부터 790m 하부(下部)(해발(海拔) 200ML)까지 광화대(鑛化帶)가 확인(確認)되었다. 향후(向後) 탐광방침(探鑛方針)을 확고(確固)히 수립(樹立)하기 위(爲)하여는 광상(鑛床)의 성인구명(成因究明)은 물론(勿論) 광상(鑛床)의 배태조건(胚胎條件)에 있어 지질구조규제(地質構造規制)와 화강암(花崗岩)의 실입상(實入狀)과의 관계(關係), 광액(鑛液)의 통로(通路)에 대(對)한 지질구조(地質構造), 모암(母岩)의 화학(化學) 물리적(物理的) 특성(特性)에 대(對)한 연구(硏究) 검토(檢討)가 었어야 하겠다.

• Tunnel and Underground Space
• /
• v.26 no.4
• /
• pp.253-265
• /
• 2016

In this study, travel time data collection of mine equipments was conducted in an underground mine using a reverse Radio Frequency IDentification (RFID) system. In the reverse RFID system, RFID readers and antennas are mounted on mine equipments, and RFID tags are attached to the underground mine gallery. Indoor experiments were performed to analyze how RFID reader transmission power levels affect tag readable area and tag recognition rates. The results showed that travel time measurement become precise when the reader transmission power was reduced, however tag recognition rates were reduced. The field experiments indicated that setting the reader transmission power to 28 dBm maintained the tag recognition rate while minimizing the tracking location error. In addition, the results revealed that the reverse RFID system can be used successfully in an underground mine to collect the travel time data of haulage trucks.