• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.501-508
• /
• 2009

The thermal degradation experiment of sodium salt of poly (${\gamma}$-glutamic acid) (PGGNa) has been carried out in both its solid phase and solution phase at the range of $57{\sim}120^{\circ}C$ and their molecular weight decreasing effect was analyzed as a function of time by means of viscometry and light scattering. Based on the solid phase degradation results, it was supposed that the bond scission rate in a polymer chain kept constant and that the bond scission was occurred on a randomly located position in a polymer chain. For the degradation in solution phase, it was also found that all data at various temperatures were dropped on a single master curve when the reduced time $t/t^*$ was used in the plot of the reciprocal intrinsic viscosity (or molecular weight). This degradation curve in solution phase could be expressed as the sum of a single exponential and a linear equation and especially, the single exponential character appeared only at the beginning stage. The activation energy was measured as $107{\sim}115$ kJ/mol in this study and agreed with the literature values.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.123-128
• /
• 2002

The synergistic effect of ethylene/propane and ethylene/methane mixtures on soot formation is studied experimentally with a concentric co-flow burner. The integrated soot volume fractions, laser light scattering signal and PAH concentrations are measured for different fuel supply configurations. The synergistic effect in ethylene/propane diffusion flames is found to be affected not only by the composition of mixture but also by the way of mixing. Comparing to the homogeneously mixed ethylene/propane case, the increase of soot formation is observed when propane is supplied through the inner nozzle, while the decrease is observed when propane is supplied through the outer nozzle. However, the measured PAH concentration distributions are inconsistent with the current view of the synergistic effect of ethylene./propane mixture on soot formation. Virtually no synergistic effect is observed in ethylene-methane flames regardless of the fuel supply configuration, which suggests the important role of $C_3$ species produced during the propane pyrolysis process for the synergistic effect.

• Particle and aerosol research
• /
• v.14 no.4
• /
• pp.107-119
• /
• 2018

In this study, we have developed a real-time monitoring device for measuring PM10 and PM2.5 of ambient aerosol particles. The real-time PM monitor (SENTRY Dust Monitor) uses the optical scattering method and has 16 channels in particle size. The laboratory and field tests were carried out to evaluate the developed SENTRY Dust Monitor. Arizona Test Dust particles were used as test particles in the laboratory test and the field test was carried out at the Jongno-gu Observatory in Seoul. The measurements of PM10 and PM2.5 concentrations obtained by SENTTRY Dust Monitor were compared with Grimm Dust Monitor (Model 1.108) and a beta ray gauge. It was shown that the PM10 and PM2.5 concentrations obtained by SENTRY Dust Monitor agree well with that of the reference devices. Based on the results obtained in this study, it could be concluded that the SENTRY Dust Monitor can be used as a PM monitoring device for real-time monitoring of the ambient aerosols.

• Journal of the Korean Chemical Society
• /
• v.47 no.5
• /
• pp.479-486
• /
• 2003

In this study, poly(DL-lactide-co-glycolide) nanoparticles loaded with water-insoluble vitamins such as vitamin A (Retinol) and vitamin E acetate were prepared by the emulsification diffusion method. Polymer solution was prepared by the two water-miscible organic solvent, such as ethanol and acetone. Because of its biocompatible property, polyethyleneglycol-polypropyleneglycol diblock copolymer was used as surfactant and stabilizer. The influence of some preparative variables on the nanoparticle formation and on the loading efficiency of active agents, such as the type and concentration of stabilizing agent, the stirring methods, the water/oil phase ratio and the polymer concentration were investigated in order to control and optimize the process. After preparation of nanoparticles loaded with active agent, particle size and distribution were evaluated by the light scattering particle analyzer. The loading efficiency of active agents was evaluated by the UV-visible spectroscopy. As the results, particle size were 50-200 nm and dispersibility was monodisperse. The optimum loading efficiency of active agents was observed 50-60%. It was found that the appropriate of selections of binary solvent mixtures and polymeric concentrations in both organic and aqueous phases could provide good yield and favorable physical properties of PLGA nanoparticles.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.25-35
• /
• 1997

오늘날 열대림 면적의 급격한 감소, 지구온난화등 지구환경 보전의 관점에서 이들 목재이외의 자원의 활용 및 양마와 같은 새로운 비목재자원 개발의 중요성이 재인식되기에 이르렀으며, 이 가운데서 양마는 생장이 라르고 수확량이 크며, 목질부의 단섬유는 물론 긴 섬유장을 가진 인피부섬유로 구성되어 있고, 실리카함량도 매우 적어, 특히 산림자원이 부족한 개발도상국에서 펄프.제지용 자원으로서 주목되고 있다. 양마가펄프.제지용자원으로서 오늘날과 같은 세계적 주목을 받게 된 것은 미국 농무성 북부지역연구센타 에서 이루어진 “새로운 섬유작물”에 관한 기초연구에서 양마가 제지용 섬유작물로서 높이 평가되고 있다. 양마의 경우 인피부는 비교적 리그닌함량이 적고, 목질부는 활엽수재에 가까운 리그닌을 함유하고 있는데다, 섬유형태에 있어서도 인피부와 목질부간에 큰 차이가 발견된다. 본 연구에서는 양마를 중성아황산법으로 전처리하여 제조한 반화학펄프로 부터 제조한 종이의 광학적 성질을 검토하였다 펄프의 광학적 성질은 원료의 화학적 조성,섬유의 형태, 부위.화학적 처리정도, 원료의 저장기간 및 충전제의 첨가에 따라 크게 영향을 받았다. 장섬유와 낮은 리그닌함량을 가진 전간부 펄프시트는 불투명도가 낮았으며, 목질부 펄프로부터 상대적으로 밀도가 다소 높고, 불투명도도 높은 종이를 만들 수 있었다. 펄프원료의 저장기간이 백색도를 낮추었으며, 불투명도에는 그다지 영향하지 않았다. 약품전처리 및 표백이 백색도 및 불투명도에 크게 영향하였고, 특히 충전제 첨가로 광산란을 증가시켜 불투명도가 높은 종이를 제조할 수 있었다.6. CL종의 난황콜레스테롤 수준에 대한 계란의 일령 상호간에는 전체적으로 상호간에 차이가 없었다. 7. 26주령시 혈중콜레스테롤 수준은 CL종이 다른 두 육계종들 보다 유의적 (P$\leq$0.05)으로 높았다. 8. 성별간 혈중콜레스테롤 수준의 차이는 CL종, BR1 및 BR2 중에서 CL종에서만 나타났으며, 수컷은 암킷보다 혈액 100 mL당 약 90 mg이 낮았다.구체적인 생화학적인 연구가 이루어져야 될 것으로 여겨진다.야 할 것으로 사료된다. 냉장 저장을 하고 저장기간이 길어질 경우는 냉동저장을 사용하는 것이 바람직하다고 생각된다.S, FOS나 말티톨로 대체된 스폰지 케익은 설탕 100% 사용한 케익과 비교하여 크게 나쁘지 않거나 휠씬 나은 특성을 보이므로 스폰지 케익 제조에 그들의 이용이 가능함을 확인하였다.thione 같은 다른 항산화제의 절약 효과, CYP2El의 유도 저하를 통하는 것으로 생각되며 그중 어떤 것에 가장 큰 영향을 받는 지는 아직 알려지지 않았고 더욱 많은 연구가 요구된다.우와 사료에 $\omega$3계 지방산 급원을 첨가, 동물에게 이행시켜 $\omega$3계 지방산 강화식품을 제조하는 두 가지 방법이 있을 수 있는데 전자는 통조림, 과자, 건강보조식품류에 다용되며 후자는 다양한 기능성 축산식품에 활용되고 있다. $\omega$3계 지방산 강화 축산식품에는 돼지고기, 우유, 치이즈, 계란, 분유, 햄 등 다양한 제품에 활용, 개발되고 있으며 최근에는 이러한 식품 개발에 더욱 박차가

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.453-457
• /
• 2007

Zinc oxide (ZnO) and Ga doped zinc oxide (GZO) with different thickness in range of 10nm to 100nm are prepared on glass substrate by RF magnetron sputtering at room temperature. The structural and optical properties of the thin films is evaluated. The structural properties of ZnO and GZO are investigated by Tunneling Electron Microscopy (TEM) and scanning electron microscopy (SEM). Optical properties are also investigated by UV-VIS-NIR spectrophotometer (200$\sim$1400nm). The much larger grain size of ZnO compared to GZO decreased the light scattering at the grain boundary and improved the transmittance. The transmittance of ZnO is higher than that of GZO through all of the ranges of wavelengths. In case of over 50nm, we found that the transmittance of ZnO is 20% higher than that of GZO.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.62-62
• /
• 2000

도공지 제조 시 적절한 표면특성을 지닌 원지를 사용하는 것은 최종 도공지 품질향상은 물론 조업성 개선에도 필수적인 요소이다. 이러한 목적을 달성하기 위해 도공원지의 표면 사이징이 실시되고 있다. 도공원지의 표면 사이정 시 양성전분을 이용할 경우 서로 반대로 하전된 전분 과 섬유 사이에 발현되는 정전기적 인력에 의해서 표면 사이정 전분의 원지로의 전분 침투가 억제되어 도공원지의 불투명도, 광택도 인쇄적성 둥의 물성 향상을 꾀할 수 있다. 또 이러한 원지를 이용하여 도공을 할 경우 음전하를 띤 도공액 구성성분과 양전하를 띤 원지 표면의 정 전기적 작용에 의해 도공액의 부동화가 촉진될 수 있으므로 도공액의 표면 잔류성이 향상되 며, 도공층 공극 구조 개선에 따른 광학적인 성질의 개선도 기대할 수 있을 것으로 기대된다. 본 연구에서는 양성전분으로 표면 사이정 된 원지를 사용한 도공지와 기존의 산화전분을 이용하여 표면 사이정한 원지를 이용하여 제조된 도공지의 특성을 비교하였다. 또 양성전분에 의한 표면 사이징 효과를 보다 극대화하고 도공안료와 원지 표면과의 반응성을 증가시키기 위 해 양이온성 폴리머를 표면 사이정 시 첨가하여 표면 사이칭을 하는 방법을 평가하였다. 아울 러 양성전분과 도공안료와의 반응에 따라 도공층의 부동화가 촉진될 수 있다는 근거를 구명하 기 위해 레올로지적인 접근을 시도하였으며, 도공층의 공극 특성 관찰, 광산란 및 광홉수 계수 측정 등을 통해 양성전분으로 표면 사이정된 도공층의 구조적 특성을 분석하였다. 그 결과 산화전분에 비해 양성전분으로 표면 사이징한 원지의 경우 도공지의 불투명도가 높게 나타났다. 이는 양성전분으로 표면 사이정한 원지를 사용한 경우 도공층의 구조가 광 산란계수를 향상시킬 수 있도록 변화되었기 때문임을 확인하였다. 표면 사이징시 양이온성 폴리머를 첨가할 경우 불투명도 개선에 상당한 효과가 있었으며, 전분 대비 1% 이하의 첨 가량에서도 어느 정도의 개선이 가능하였다. 양성전분에 의한 도공액의 조기 부동화가 발현 된다는 것을 구명하기 위해서 도공액의 점탄성적 평가를 실시한 결과 산화전분에 비해 양성 전분 상에서 도공액의 storage modulus가 높고 critical strain point 역시 높은 값을 나타낸 다는 것을 확인하였다. 이는 양성전분과 도공액, 특히 클레이와의 정전기적 인력에 의한 반 응 결과로 생각된다. 양성전분을 이용한 도공원지의 표면 사이정 기술은 특히 평량이 낮은 도공지의 경우 수분 의 침투를 억제함으로써 도공공정에서의 지절을 감소시킬 뿐 아니라 불투명도 등 광학적 성질 을 개선시키고, 표면 커버리지를 향상시키는 효과를 나타낼 것으로 기대된다.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.78-89
• /
• 2001

Morphological changes of unsaturated polyester/polyvinylacetate semi-IPN were studied while the phase separation and the cure reaction occurred in a competing fashion. The light scattering and thermal analysis techniques were used to investigate the phase separation rates and mechanical properties resultantly induced by molecular diffusion of thermoplastic polymer during the curing process of thermosetting polymer. The reaction activation energy was calculated by using Flynn-Wall method and the semi-IPN structure exhibited various phase-separation morphological characteristics. When PVAc composition was 10 wt%, the phase separation was not observed during the curing reaction, but the phase separation occurred in a similar fashion to nucleation and growth(NG) mechanism at room temperature. On the other hand, when PVAc composition was over 11.65 wt%, the phase separation was generated in the middle of the curing process. Consequently, the phase separation seemed to influence the curing reaction rate, which was also supported by the changing activation energy with conversion and PVAc composition. Finally, the total scattered intensity was measured at various temperature, and subsequently the diffusion rates of phase separation R(${\beta}m$) were evaluated.

• Korean Journal of Materials Research
• /
• v.20 no.10
• /
• pp.501-507
• /
• 2010

Changes in surface morphology and roughness of dc sputtered ZnO:Al/Ag back reflectors by varying the deposition temperature and their influence on the performance of flexible silicon thin film solar cells were systematically investigated. By increasing the deposition temperature from $25^{\circ}C$ to $500^{\circ}C$, the grain size of Ag thin films increased from 100 nm to 1000 nm and the grain size distribution became irregular, which resulted in an increment of surface roughness from 6.6 nm to 46.6 nm. Even after the 100 nm thick ZnO:Al film deposition, the surface morphology and roughness of the ZnO:Al/Ag double structured back reflectors were the same as those of the Ag layers, meaning that the ZnO:Al films were deposited conformally on the Ag films without unnecessary changes in the surfacefeatures. The diffused reflectance of the back reflectors improved significantly with the increasing grain size and surface roughness of the Ag films, and in particular, an enhanced diffused reflectance in the long wavelength over 800 nm was observed in the Ag back reflectors deposited at $500^{\circ}C$, which had an irregular grain size distribution of 200-1000 nm and large surface roughness. The improved light scattering properties on the rough ZnO:Al/Ag back reflector surfaces led to an increase of light trapping in the solar cells, and this resulted in a noticeable improvement in the $J_{sc}$ values from 9.94 mA/$cm^2$ for the flat Ag back reflector at $25^{\circ}C$ to 13.36 mA/$cm^2$ for the rough one at $500^{\circ}C$. A conversion efficiency of 7.60% ($V_{oc}$ = 0.93, $J_{sc}$ = 13.36 mA/$cm^2$, FF = 61%) was achieved in the flexible silicon thin film solar cells at this moment.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.258-265
• /
• 1992

A low loss optical waveguide of $P_{2}O_{5}-SiO_{2}$on Si substrate is produced by using the chemical vapour deposition method of $SiO_2$ thin films used in Si technology. Propagation loss of the waveguide layer was 1.65 dB/cm as produced and reduced down to 0.1 dB/cm after heat treatment at $1100^{\circ}C$. By using laser lithography and reactive ion etching method $P_{2}O_{5}-SiO_{2}$ waveguide was produced and subsequently annealed at $1100^{\circ}C$.As a result of this annealing the shape of the waveguide core was changed from rectangular to semi-circular form, and the propagation loss was reduced as down to 0.03 dB/cm at 0.6328$\mu$m and 0.04dB/cm at 1.53$\mu$m. We think that the mechanism of the reduction in propagation loss during the heat treatment is the following: 1) The hydrogen bonding in waveguide layer, which causes absorption loss, is dissociated and diffused out. 2) The roughness of the interface and the micro-structure of the waveguide layer is removed. 3) The irregularities in the cross-sectional shape of the waveguide which was induced during the lithographic process were disappeared by flowing of the waveguide core.