• The Korean Journal of Pesticide Science
• /
• v.4 no.4
• /
• pp.12-18
• /
• 2000

In order to artificially reduce the quinclorac residue in aqueous solution and soil, six potential photosensitizers were screened for their effectiveness in enhancing the photodegradation. The degraded amount of quinclorac in distilled water by sunlight was minor compared to that in the dark, indicating that there was little direct photolysis. The photodegradation ratio of quinclorac in methanol was 40.3%. Whereas, the ratios in the presence of photosensitizers PS-1 (aromatic ketone), PS-3 (polycyclic quinone), and PS-6 (inorganic semiconductor) were 96.6, 72.7, and 95.7%, respectively, showing the most photosensitizing effects. In sand, PS-3 was more effective than any other photosensitizer PS-1 (19.6%), PS-3 (64.1%) and PS-6 ($17.9{\sim}19.4%$). five photoproducts of quinclorac in methanol were identified by GC-MS and quinclorac added with the photosensitizer PS-1 gave three photoproducts. Photoproducts with an aldehyde group formed in methanol were confirmed by the reduction of sodium 3,5-dinitrosalicylate in the Lindsay's method. E. crus-galli war. oryzicola was not controlled by the quinclorac residues photodegraded at tile concentrations higher than 30 ppm of the photosensitizer PS-3 in a flooded rice paddy soil. These results indicate that the quinclorac residues in aqueous solution and soil can be degraded efficiently by tile photosensitizers PS-1, PS-3, and PS-6.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.769-775
• /
• 2013

UV-induced transformations in the characteristics of dissolved organic matter (DOM) and the subsequent effects on the disinfection by-product formation potential (DBPFP) were investigated using the mixtures of the two humic substances with different sources, and two different size fractions of Suwannee River fulvic acid (SRFA). 7 day-photodegradation resulted in the decrease of specific ultraviolet absorbance (SUVA) of the mixtures as well as the specific DBPFP. After the irradiation, however, higher specific DBPFP values were consistently observed at the same range of the SUVA values. This suggests that non UV-absorbing components, generated by the UV-irradiation, may contribute to the formation of DBPs. Two different molecular size fractions of SRFA showed dissimilar responses to photodegradation. The behavior was also influenced by the types of the DBPs generated. Higher levels of trihalomethenes (THMs) were formed per organic carbon for the high molecular fraction compared to the low molecular fraction, whereas no differences were found in the formation of haloacetic acids (HAAs) between the two different size fractions. The formation of the two types of DBPs also differed by the irradiation times. Specific formation potential of THMs consistently increased upon the irradiation, whereas HAAs showed the initial increase followed by the decrease in their specific formation potential.

• Clean Technology
• /
• v.4 no.2
• /
• pp.54-60
• /
• 1998

Polyphenylvinylketone (PPVK) having a carbonyl group at the side chain was blended with polystyrene (PS) to investigate the effect of vinylketone polymers on the photodegradability of the blend as a function of U.V. irradiation time. Hydrogenated polyphenylvinylketone (PPVK(H)) which is made by hydrogenation of some of the carbonyl groups in PPVK was also blended with PS to check the role of carbonyl carbonyl group in the process of photodegradation. Photodegradability was also investigated for blends of PS with polymethylvinylketone (PMVK) and for copolymers of styrene and methylvinylketone (SMVK) to compare the effect of copolymerization versus blending on photodegradability. PPVK showed higher photodegradability than PPVK(H), which followed that the blends of PS with PPVK gave higher degradability than with PPVK(H). In view of the fact that PPVK(H) is a partially hydrogenated version of PPVK, carbonyl group was confirmed to be involved in the photodegradation mechanism. When polymethylvinylketone (PMVK) was blended with PS, this blend showed a higher degradability than PS/PPVK blend. Therefore the highest photodegradability was achieved when PS was blended with PMVK followed by PPVK and PPVK(H) in order. When SMVK was UV irradiated, it showed the highest photodegradability than any blends mentioned above. Therefore, copolymerization was proved to be the better means of photodegradation than blending.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.05a
• /
• pp.112-115
• /
• 2005

수용액 중 PCP에 UV을 조사하여 광분해한 결과, 중간생성물로서 2346T4CP, 2356T4CP, 25D2CP가 검출되었다. PCP로 부터 유래된 Cl는 최종적으로 전부 무기화되어 염소이온으로써 회수되었다. 또한 PCP의 광분해에 있어서 Cl 수지는 적어도 80%, 분해 종료시에는100% 파악되었다. 미확인 Cl 수지를 명확하게 하기위해, 중간생성물로 가능성이 있는 T4CR의 정성 및 정량과 분해거동의 파악이 반드시 필요하리라 생각된다. 또한 이러한 결과에 근거하여 PCP의 광분해 경로를 제안하였다.

• Korean Journal of Optics and Photonics
• /
• v.24 no.4
• /
• pp.184-188
• /
• 2013

Two types of polymer-based optical splitters with $200{\mu}m$ large core are presented for optical multimode networks, such as smart home networks, intelligent automotive networks, etc. Optical splitters that have 1:1 symmetric and 9:1 asymmetric structure were fabricated by a ultra violet(UV)-imprint technology using a deep etched Si(silicon) master by the Bosch process. In this paper, we successfully fabricated the symmetric and asymmetric optical splitters with suitable optical network applications.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.122-126
• /
• 2008

Dual backlight unit incorporating a single light source integrated with a beam splitting reflector was demonstrated, providing a surface light beam for both the keypad and the display section simultaneously. The reflector was realized by aligning a groove substrate with a matching cover, and a light guiding module comprising a stack of light guide panels and prism/diffuser sheets was attached to both sides of the reflector. A light emanating from the light source-placed in the middle of the substrate-undergoes a series of reflections through the reflector to reach the input of the light guiding module. Then it is transformed into a surface light beam, which is used to irradiate the keypad and display sections simultaneously. As for the accomplished dual surface light sources, the measured average luminance and the spatial luminance uniformity were respectively about $420\;cd/m^2$ and 69% for the keypad section, and $640\;cd/m^2$ and 79% for the display section.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.38-40
• /
• 2003

$TiO_2$로 코팅된 scoria를 이용하여 공존물질 존재시 humic acid의 광분해 연구 결과 광촉매량의 증가에 따라 제거효율이 증가하였고, 양이온을 첨가하였을 때 제거효율이 증가하였다. 탄산염이온을 첨가하였을때는 상당한 차이를 보였으며 180분 후에도 30%정도의 제거 효율을 나타냈다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.110-114
• /
• 2002

The relationship between the orientation of molecules adsorbed on $_TiO2$ and their photoproducts was examined by employing HBPCA (4-hydroxy-biphenylcarboxylic acid) as a model organic pollutant. For this purpose, the Photoproducts after irradiation with UV radiation at various pH were compared by utilizing UV and Raman spectroscopies. It was found from these studies that pH affected the photoproducts probably due to the different orientations of the adsorbed molecules, and that the orientation of the adsorbed molecules and their photoproducts were closely correlated.

• Journal of Food Hygiene and Safety
• /
• v.19 no.2
• /
• pp.97-103
• /
• 2004

The present study was performed to investigate photodegradation rate constants and degradation products of piperophos by the USEPA method. The pesticide was very stable in 16 days exposure of sunlight from October 3 to 22, 2003 and humic acid had no sensitizing effect on the photolysis of each pesticide in sunlight. In the UV irradiation test, piperophos was rapidly degraded as increasing UV intensity. In case of UV irradiation with TiO$_2$ and with TiO$_2$ powder amount, degradation of piperophos was slower than UV irradiation. In order to identify photolysis product, the extracts of degradation product was analyzed by GC/MS. The mass spectrum of photolysis product of piperophos was at m/z 166. It was suggested that the photolysis products of piperophos was O, O-dipropyl phosphorodithioate.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.3
• /
• pp.172-177
• /
• 2002

Photodegadation rates of carbofuran in aqueous solution were measured under various test conditions mainly following the guidelines of U.S. EPA and OECD. Half-lives of carbofuran in distilled water were 9.7 days. 3.3 days, and 1 hr under natural sunlight, SUNTEST with UV filter, and SUNTEST without UV filter, respectively. Waters from a paddy field accelerated the decomposition by factor of 6. It was confirmed that the use of SUNTEST could shorten the test period of photodegradation.