• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.135-144
• /
• 2005

In the high-Ca limestone zone of the Pungchon Formation of the Lower Chosun Supergroup, cryptocrystalline alterations with reddish brown color occur as fissure-fillings or coatings, which was originated from the upper formation, i. e., the Hwajeol Formation. The precipitates result in degradation and contamination of the high-Ca limestone ore in grade and quality, showing characteristic occurrence and mineral composition typical of suggesting a supergene origin. Chalcedonic quartz, kaolinite, illite, goethite and hematite are constituting a characteristic authigenic mineral assemblage and, in places, smectite is less commonly included in the weathering product. In addition to these authigenic phases, some detrital minerals such as mica and orthoclase constituting relatively coarser grains are also rarely present in the supergene alterations. A rather complex clay facies consisting of kaolinite, illite and smectite in the alterations seems to correspond to the typical clay composition of the reported residual pedogenic soils by limestone weathering. The cryptocrystalline weathering product is partly altered to stilbite, a characteristic hydrothermal zeolite, in places, by the hydrothermal contact of late stage. The time of formation and infiltration of the supergene alterations seems to correspond to the stage just after the epithermal alteration of the Pungchon Limestone, i. e., an early Jurassic age. The supergene alteration, which may imply the stage of uplifting, weathering and erosion of the Chosun Supergroup, appears to have undergone at an oxygen-rich environment in descending water of meteoric origin by means of a chemical leaching and diffusion.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.463-472
• /
• 2012

For last decade, the amount of information has been increased rapidly because of the internet and computing technology development, mobile devices and sensors, and social networks like facebook or twitter. People who want to gain important knowledge from database have been frustrated with large database. Many studies for automatic knowledge extracting meaningful knowledge from large database have been fulfilled. In that sense, automatic knowledge extracting with computing technology has been highly significant in information technology field, but still has many challenges to go further. In order to improve the effectives and efficiency of knowledge extracting system, test collection is strongly necessary. In this research, we introduce a test collection for automatic knwoledge extracting. We name the test collection KEEC/KREC(KISTI Entity Extraction Collection/KISTI Relation Extraction Collection) and present the process and guideline for building as well as the features of. The main feature is to tag by experts to guarantee the quality of collection. The experts read documents and tag entities and relation between entities with a tool for tagging. KEEC/KREC is being used for a research to evaluate system performance and will continue to contribute to next researches.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.2
• /
• pp.65-76
• /
• 2015

The Clean Development Mechanism (CDM) is the multi-lateral 'cap and trade' system endorsed by the Kyoto Protocol. CDM allows developed (Annex I) countries to buy CER credits from New and Renewable (NE) projects of non-Annex countries, to meet their carbon reduction requirements. This in effect subsidizes and promotes NE projects in developing countries, ultimately reducing global greenhouse gases (GHG). To be registered as a CDM project, the project must prove 'additionality,' which depends on numerous factors including the adopted technology, baseline methodology, emission reductions, and the project's internal rate of return. This makes it difficult to determine ex ante a project's acceptance as a CDM approved project, and entails sunk costs and even project cancellation to its project stakeholders. Focusing on hydro power projects and employing UNFCCC public data, this research developed a prediction model using logistic regression and CART to determine the likelihood of approval as a CDM project. The AUC for the logistic regression and CART model was 0.7674 and 0.7231 respectively, which proves the model's prediction accuracy. More importantly, results indicate that the emission reduction amount, MW per hour, investment/Emission as crucial variables, whereas the baseline methodology and technology types were insignificant. This demonstrates that at least for hydro power projects, the specific technology is not as important as the amount of emission reductions and relatively small scale projects and investment to carbon reduction ratios.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.120-131
• /
• 2005

Statement of problem. More than 70% of patients who need the implant supported restoration are parially edentulous. The principles of design for implant supported fixed partial denture in mandibular posterior region are many and varied. Jurisdiction for their use is usually based on clinical evaluation. There are several areas or interest regarding the design of implant supported fixed partial denture in mandibular posterior region. 1) Straight and tripod configuration in implant placement, 2) Two restoration types such as individualized and splinted restorations. Purpose. The purpose of this study was to compare the amount and distribution of stress around the implant fixtures placed in the mandibular posterior region with two different arrangements and to evaluate the effects of splinting using the photoelastic stress analysis. Material & methods. 1) Production of study model: Mandibular partially edentulous model was waxed-up and duplicated with silicone and two models were poured in stone. 2) Fixture installation and photoelastic model construction: Using surveyor(Ney, USh), 3 fixtures(two 4.0 $\times$13 mm, one 5.0$\times$10 mm, Lifecore, USA) were insta)led in straight & tripod configurations. Silicone molds were made and poured in photoelastic resin (PL-2. Measurements group, USA). 3) Prostheses construction: Four 3-unit bridges (Type III gold alloy, Dongmyung co., Korea) were produced with nonhexed and hexed UCLA abutments and fitted with conventional methods. The abutments were tightened with 30 Ncm torque and the static loads were applied at 12 points of the occlusal surface. 4) Photoelastic stress analysis : The polarizer analyzer system with digital camera(S-2 Pro, Fujifilm, Japan) was used to take the photoelastic fringes and analysed using computer analysis program. Results. Solitary hexed UCLA restoration developed different stress patterns between two implant arrangement configurations, but there were no stress transfer to adjacent implants from the loaded implant in both configurations. However splinted restorations showed lesser amount of stresses in the loaded implants and showed stress transfer to adjacent implants in both configurations. Solitary hexed UCLA restoration with tripod configuration developed higher stresses in anterior and middle implants under loading than implants with straight configurations. Splintied 3 unit fixed partial dentures with tripod configuration showed higher stress development in posterior implant under loading but there were no obvious differences between two configurations. Conclusions. The tripod configuration of implant arrangement didn't show any advantages over the straight configuration. Splinting of 3 unit bridges with nonhexed UCLA abutments showed less stress development around the fixtures. Solitary hexed UCLA restoration developed tilting of implant fixture under offset loads.

• Korean Journal of Optics and Photonics
• /
• v.31 no.3
• /
• pp.142-147
• /
• 2020

In this paper, we report highly efficient second harmonic generation of continuous-wave Yb fiber lasers incorporating a periodically poled LiTaO₃ device (MgO:PPSLT) as a frequency converter. The seed laser output from a Yb fiber master oscillator using a Fabry-Perot feedback cavity was amplified in a Yb fiber amplifier stage, yielding 28.5 W of linearly polarized output at 1064 nm in a beam with beam quality, M², of ~1.07. Second harmonic generation was achieved by passing the laser beam through MgO:PPSLT. Under optimized conditions, we obtained 11.1 W of green laser output at 532 nm for an incident signal power of 25.0 W at 1064 nm, corresponding to a conversion efficiency of 44.4%. The detailed investigation to find the optimized operating conditions and prospects for further improvement are discussed.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.68-72
• /
• 2008

Fiber-optic strain sensors based on Bragg reflection gratings produce the change of reflection spectrum when an external stress is applied on the sensor. To measure the Bragg reflection wavelength in high speed, an arrayed waveguide grating device is incorporated in this work. By monitoring the output power from each channel of the AWG, the peak wavelength corresponding to the applied strain could be obtained. To enhance the accuracy of the AWG wavelength interrogation system, a chirped fiber Bragg grating with a 3-dB bandwith of 5.4 nm is utilized. The high-speed response of the proposed system is demonstrated by measuring a fast varying strain produced by the damped oscillation of a cantilever. An oscillation frequency of 17.8 Hz and a damping time constant of 0.96 second are obtained in this measurement.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.209-216
• /
• 2005

A new second generation advanced thermal imager, which can be used for battle tank sight has been developed by ADD. This system uses a $480\times6$ TDI HgCdTe detector, operating in the $7.7-10.3{\mu}m$ wavelength made by Sofradir. The IR optics has dual field of views such as $2.67\times2^{\circ}$ in NFOV and $10\times7.5^{\circ}$ in WFOV. And also, this optics is used for athermalization of the system. It is certain that our sensor can be used in wide temperature range without any degradation of the system performance. The scanning system to be able to display 470,000 pixels is developed so that the pixel number is greatly increased comparing with the first generation thermal imaging system. In order to correct non-uniformity of detector arrays, the two point correction method has been developed by using the thermo electric cooler. Additionally, to enhance the image of low contrast and improve the detection capability, we have proposed the new technique of histogram processing being suitable for the characteristics of contrast distribution of thermal imagery. Through these image processing techniques, we obtained the highest quality thermal image. The MRTD of the LWIR thermal sight shows good results below 0.05K at spatial frequency 2 cycles/mrad at the narrow field of view.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.19-28
• /
• 2005

Real surround viewing conditions in watching the color display devices such as TV and PC monitor are quite different from the standard viewing conditions. Human visual system is adapted chromatically under the different viewing conditions in luminance levels and chromaticity of illuminants. Accordingly, the reproduced colors of the same chromaticity will appear as quite different color. Therefore, it is necessary that the displayed colors are reproduced to be appeared as the original colors in the standard viewing conditions. In this paper, we propose a chromatic adaptation model for the variations of the surround illuminants' chromaticity under the same luminance conditions. In proposed chromatic adaptation model, we calculate each gain of L, M, and S as nonlinear functions according to the chromaticity of the surround illuminants. And the optimal coefficients are obtained from the corresponding colors data of the Breneman's experiments. The proposed chromatic adaptation model is compared with the conventional chromatic adaptation models. In the experimental results, the proposed model has very good performance in the whole range of luminance levels. We also experimentally confirmed that the reproduced corresponding colors using the proposed chromatic adaptation are appeared as the original colors when the real surround viewing conditions are different from the standard viewing conditions.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.2
• /
• pp.53-60
• /
• 2016

In this paper, we introduce the implementation and test results of a new method of correlated result storage to achieve the full performance of the Daejeon hardware correlator. Recently, the observation of 8 Gbps speed, which is the maximum observational standard of KVN(Korean VLBI Network), has been performed. The correlation processing using the Daejeon hardware correlator is also required. Therefore, a new correlation result storage introduction has become necessary. The maximum correlation result output speed of the Daejeon hardware correlator is 1.4 GB/sec per 25.6 ms integration time. The conventional correlation result storage system can not cope with the maximum correlation output speed of the Daejeon hardware correlator, and the output speed is limited to 1/4. That is, among the four input ports of the Daejeon hardware correlator, the three inputs are limited to correspond to the observation rate of 1 Gbps. This new storage system uses the Gluster file system among many of the latest technologies used in storage systems. In tests that meet the maximum output rate of 1.4 GB/sec for the Daejeon hardware correlator, 350 MB/sec for each of the four optical outputs, resulting in 1.4 GB/sec in total.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.615-622
• /
• 2018

Recent advancements in camera communication (CamCom) technology using visible light exploited to use display as an luminance source to modulate the data for visible light data communication. The existing display-CamCom techniques uses the selected region of interest based camera capturing approach to detect and decode the 2D color coded data on display screen. This is not effective way to do communicate when the user on mobility. This paper propose the automatic display detection using Lambertian color segmentation combined with canny edge detection algorithms for CamCom in order to avoid manual region of interest selection to establish communication link between display and camera. The automatic display detection methods fails using conventional edge detection algorithms when content changes dynamically in displays. In order to solve this problem lambertian color segmentation combined with canny edge detection algorithms are proposed to detect display automatically. This research analysed different algorithms on display edge recognition and measured the performance on rendering dynamically changing content with color code on display. The display detection rate is achieved around 96% using this proposed solutions.