• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.10
• /
• pp.543-550
• /
• 2016

Amine-type PP-g-VBC-EDA adsorbent, which possesses anionic exchangeable function, was prepared through photoinduced graft polymerization of vinylbenzyl chloride (VBC) onto polypropylene non-woven fabric and subsequent amination reaction using ethylenediamine (EDA). Adsorption characteristics of anionic nutrients on the PP-g-VBC-EDA adsorbent have been studied by batch adsorption experiments. The equilibrium data well fitted the Langmuir isotherm model, and the maximum monolayer sorption capacity was found to be 59.9 mg/g for $NO_3-N$ and 111.4 mg/g for $PO_4-P$. The adsorption energies were higher than 8 kJ/mol indicating anion-exchange process as the primary adsorption mechanism. The pseudo-second order kinetic model described well the kinetic data and resulted in the activation energy of 9.8-36.7 kJ/mol suggesting that the overall rates of $NO_3-N$ and $PO_4-P$ adsorption are controlled by the chemical process. Thermodynamic parameters such as ${\Delta}G^o$, ${\Delta}H^o$ and ${\Delta}S^o$ indicated that the adsorption nature of PP-g-VBC-EDA for anionic nutrients is spontaneous and exothermic. The PP-g-VBC-EDA could be regenerated by washing with 0.1 N HCl.

• The Korean Journal of Pesticide Science
• /
• v.4 no.4
• /
• pp.12-18
• /
• 2000

In order to artificially reduce the quinclorac residue in aqueous solution and soil, six potential photosensitizers were screened for their effectiveness in enhancing the photodegradation. The degraded amount of quinclorac in distilled water by sunlight was minor compared to that in the dark, indicating that there was little direct photolysis. The photodegradation ratio of quinclorac in methanol was 40.3%. Whereas, the ratios in the presence of photosensitizers PS-1 (aromatic ketone), PS-3 (polycyclic quinone), and PS-6 (inorganic semiconductor) were 96.6, 72.7, and 95.7%, respectively, showing the most photosensitizing effects. In sand, PS-3 was more effective than any other photosensitizer PS-1 (19.6%), PS-3 (64.1%) and PS-6 ($17.9{\sim}19.4%$). five photoproducts of quinclorac in methanol were identified by GC-MS and quinclorac added with the photosensitizer PS-1 gave three photoproducts. Photoproducts with an aldehyde group formed in methanol were confirmed by the reduction of sodium 3,5-dinitrosalicylate in the Lindsay's method. E. crus-galli war. oryzicola was not controlled by the quinclorac residues photodegraded at tile concentrations higher than 30 ppm of the photosensitizer PS-3 in a flooded rice paddy soil. These results indicate that the quinclorac residues in aqueous solution and soil can be degraded efficiently by tile photosensitizers PS-1, PS-3, and PS-6.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.333-341
• /
• 2017

The Korea Atomic Energy Research Institute (KAERI) constructed the PyRoprocessing Integrated inactive Demonstration facility (PRIDE) to carry out experiments on engineering scale pyroprocessing. PRIDE has a large processing cell that human workers are not allowed to access, and thus the equipment inside is operated from outside using remote handling systems. It is therefore essential to examine the operability and maintainability of the equipment in view of remote handling systems, and the equipment is thoroughly examined in a mockup cell before it is installed in the processing cell. If the equipment is tested in a virtual mockup rather than in a mockup cell, the development cost can be significantly reduced. The PRIDE 3D simulator was integrated for virtual verification of equipment that will be installed in the processing cell. All remote handling devices in the actual PRIDE were also virtually installed in the PRIDE 3D simulator. The 3D model of the equipment was loaded and located in the exact position in the virtual processing cell. A scenario to replace an actual electrode was implemented in the PRIDE 3D simulator. The design of the equipment and the working procedures in the scenario were successfully evaluated. The results demonstrated that the PRIDE 3D simulator can be used successfully as an alternative to actual mockup testing.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.121-131
• /
• 2014

Due to the high UV light scattering effect of Zinc oxide (ZnO), it is frequently used in sunscreen skincare products. Recently ZnO coated with silica has been used in cosmetics to improve UV protection, texture, decreased photocatalytic activity, dispersibility and stability of the skin care product. In this study, we developed a ZnO composite powder coated with silica for the future application to skincare products to block UV rays that could cause photoaging. To improve consumer's satisfaction rating, we used ZnO microparticles which are widely used in the cosmetics industry. The silica was coated using hydrothermal method with sodium silicate and acid hydrolysis. UV protection of the composite powder was analyzed by UV-Vis and in-vitro test and the advantages for practical use of this powder as a skincare product were determined.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.496-500
• /
• 2009

Optically compensated bend liquid crystal display (OCB-LCD) has many application fields owing to its fast response time and wide viewing angle. However, in order to operate the OCB-LCD in bend state, this device needs quick transitions from the initial splay state to bend state. Unlike conventional approach using transient high voltage for the transition, the OCB-LCD with high surface tilt angle, which was achieved by polymerization of UV curable reactive mesogen monomer under certain voltage, was manufactured and the cell showed bend state initially. Electro-optic and electrical characteristics of the cell were analyzed. The cell shows a fast response time owing to high surface pretilt angle and very low residual DC less than 0.1 V although another polymer layer is formed above polymer alignment layers.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.79-87
• /
• 2016

Asian dust (Hwangsa) interacts with light, atmospheric gas, aerosol, and marine ecosystem, affecting Earth climate. Mineralogical properties are essential to understand the interaction between the dust and environments. In this study, we examined the mineralogical properties of Asian dust collected at Deokjeok Island, Incheon, Korea in February 22, 2015. X-ray diffraction (XRD) analyses showed that phyllosilicate minerals (62 wt%) dominate the Asian dust. Illite-smectite series clay minerals (55%) were common with minor chlorite (5%) and kaolinite (2%). Non-phyllosilicate minerals were quartz (18%), plagioclase (10%), K-feldspar (4%), calcite (4%), and gypsum (1%). Similar results were obtained by mineral quantification using scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Transmission electron microscopy combined with EDS confirmed illite-smectite series clay minerals as the dominant phyllosilicate type. Morphological analyses using SEM showed clay agglomerates, clay-coated quartz, feldspars, and micas. Gypsum grains were common on the particle surface, while calcite nanofibers, previously reported as common on the surface, were rare, indicating the reaction of calcite and acidic atmospheric pollutants to form gypsum. The analytical result of 2015 Asian dust would contribute to the establishment of mineralogical base for the modeling of the interaction between Asian dust and environments.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.259-271
• /
• 2019

We evaluated mineralogical, physical property and accelerated weather resistance of cinnabar, realgar and orpiment used as cultural heritages and traditional paintings. JB and JS are sample names of cinnabar and JH and UH are sample names of orpiment and Realgar, respectively. As a result of mineralogical property evaluation, Jinsa was identified cinnabar (HgS) and there was no difference in chemical composition according to the grade. UH and JH were confirmed realgar (AsS) and orpiment (As₂S₃), respectively. The polarization characteristics such as shape and color indicate that pigments using our test were natural mineral pigment observed by polarization microscope. Especially, in the case of cinnabar, it is not easy to distinguish between natural mineral pigment and synthetic pigment. But the results of polarization microscope said that cinnabar is natural occurring mineral which have authentic mineral particle and unevenly fracture. As a result of thermal analysis, JH has a higher glass transition temperature and heat stability than UH. After accelerated weather test, cinnabar, realgar and orpiment were striking result in color change because of light degradation. Red color of cinnabar turn into black and the color of realgar and orpiment became brighter than before. JB (meta-cinnabar) is more photosensitivity and faster becoming dark than JB (cinnabar). Finally light transforms realgar (red, As₄S₄) in arsenolite (As₂O₃).

• Journal of Forest and Environmental Science
• /
• v.23 no.1
• /
• pp.29-33
• /
• 2007

This study was purposed to elucidate the best optimum sites by ecophysiological response measurements of Kalopanax pictus samplings of plantation. The diurnal changes of the stomatal transpiration, water use efficiency, water potential, and intercellullar $CO_2$ concentration of leaves were measured by the portable IR $CO_2$ analyzer. The results obtained are summarized as follows. 1) The daily stomatal transpiration rate was highest at 10:00 a.m. After 16:00, the stomatal transpiration rate rapidly decreased. 2) The daily water use efficiency was maximum at 8:00 a.m., and then rapidly decreased until midday with decreasing water potential. 3) The daily $C_i/C_a$ ratio rapidly decreased until 9:00 a.m., and then showed a stable value until 16:00, and then rapidly increased. The daily intercellullar $CO_2$ concentration ($C_i/C_a$ ratio) showed the same tendency as water potential changes. Consequently, stomatal transpiration and water use efficiency was increased with high water potential of leaves at am, and then remarkably decreased with low water potential at pm.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.2
• /
• pp.85-90
• /
• 1994

Attempts were made to regenerate plants from petiole explane of Forest Pimpinella barchycarpa via repetitive somatic embryogenesis. Effective induction of somatic emb교ogenesis was achieved on both MS and modified $B_{5}\;(mB_{5})$ media containing BA + 2,4-D or BA + 2,4-D + NAA under light condition (16-h photoperiod/day) cultures. The explants exposed to the ligt produced numerous somatic embryos while those kept under the dark did not form any on the same medium. Somatic embryos at different developmental stages were observed to arise within a individual explants. Plantlets could be regenerated on $mB_{5}$ basal medium or $mB_{5}$ containing 0.1 mg/L NAA Secondary adventive embryos were formed on the surface of the somatic embryos. Therefore, repetitive somatic embryogenesis could be achieved by secondary embryogenesis. Although the treatment of 2,4-D or NAA alone was effective in callus formation and growth, but not in induction of somatic embryogenesis. Some explants, cultured on NAA-containing media in darkness, produced only adventive roots. The embryogenic potential was maintained for two years when subcultured to BA and 2,4-D containing media with 5 weeks inteval. Regenerated plantlets were maintained on $mB_{5}$ or MS basal media for 4 to 6 more weeks and transferred to soil of an artificial mixture for acclimation. Most plantlets (more than 97%) survived, and grew without any deformity.

• Research in Plant Disease
• /
• v.17 no.2
• /
• pp.161-168
• /
• 2011

To establish simple and reliable screening method for resistant radish to Plasmodiophora brassicae Woron. using soil-drenching inoculation, the development of clubroot on radish seedlings inoculated with P. brassicae GN-1 isolate according to several conditions such as inoculum concentration, plant growth stage and incubation period after inoculation was studied. To select resistant radish against clubroot, 10-day-old seedlings were inoculated with P. brassicae by drenching the roots with the spore suspension of the pathogen to give $1{\times}10^9$ spores/pot. The inoculated seedlings were incubated in a growth chamber at $20^{\circ}C$ for 3 days then cultivated in a greenhouse ($20{\pm}5^{\circ}C$) for 6 weeks. Under the optimum conditions, 46 commercial cultivars of radish were tested for resistance to YC-1 (infecting 15 clubroot-resistant cultivars of Chinese cabbage) and GN-1 (wild type) isolates of P. brassicae. Among them, thirty-five cultivars showed resistance to both isolates and one cultivar represented susceptible response to the pathogens. On the other hand, the other cultivars showed different responses against the tested P. brassicae pathogens. The results suggest that this method is an efficient system for screening radish with resistance to clubroot.