• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.527-536
• /
• 2021

In wireless environments, wideband receivers are used in a communication intelligent system to detect unknown signals and obtain azimuth information. To design a wideband receiver that performs multiple signal detection and direction finding simultaneously, it is necessary to consider a reception structure composed of multiple channels. In this paper, we propose a wideband multi-channel receiver for direction finding of unknown wideband communication signals including frequency hopping signals. A signal processing method for detecting received signals and estimating azimuth information is presented, and components of the manufactured wideband receiver are described. In addition, test results of the signal detection performance by mounting the proposed wideband multi-channel receiver on the flight system are included.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.59-66
• /
• 2024

In this paper, the method to design the antenna, which is suitable for an impulse-like waveform radiation, is presented. In general, the impulse-like waveform has its spectrum of around sub GHz bandwidth and the antenna should be properly designed for not only operating wide-bandwidth also reflecting the time domain characteristics for near-zone impulse radar applications. In this regard, Vivaldi antenna has been designed and characterized in terms of short-pulse radiating aspects in the time domain and verified by measured results. The designed antenna has shown to be operating within wide-bandwidth and to be stable for the input impedance from 1.8 to more than 10GHz. The far-zone radiating waveform has been investigated on each plane at the interval of 30degree and the designed antenna has shown to be a directive characteristic. It can be seen that those results proposed are widely applicable to the near area sensing applications such as ground-penetrating radar.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.389-392
• /
• 2004

정합장처리를 이용한 표적의 탐지는 다양한 종류의 간섭표적들이 존재하는 환경에서 수행될 가능성이 크며, 따라서 분해능이 높은 적응 정합장처리를 사용이 요구된다. 반면 빠르게 움직이는 고소음의 간섭표적이 존재 할 경우에는 적응정합장처리를 수행하기위한 신호단편 (snapshot) 수를 충분하게 사용할 수 없는 상황에 직면하게 된다. 제한된 신호단편을 이용하여 적응정합장처리의 CSDM (cross-spectral density matrix)을 안정적으로 추정하기 위한 목적으로 선형빔형성에서 제안되었던 광대역 STMV (steered minimum varianve) 기법을 도입하였다. MAPLE03 실험환경을 이용하여 STMV의 적응정합장처리 수치실험을 수행하고 특성을 분석하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.119-128
• /
• 2017

In this paper, the wideband direction finding algorithm and system design method for short duration signal such as frequency hopping or burst signal is presented. The polyphase filterbank that it is possible for the near perfect reconstruction was used as a pre-processing and in each subband power measurement was performed to determine whether the presence of a signal and finally general direction finding algorithm was performed. In addition, various experiments was performed using Matlab Simulink and collected data from wideband receiver to verification of the proposed algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.81-88
• /
• 2011

This paper presents a design of spiral antenna with broad bandwidth for non-linear junction detector(NLJD). An elliptical patch as radiating element located on center position of radiating surface, as well as the spiral elements on radiating surface was designed for broad bandwidth of spiral antenna. An antenna ground structure generating the multi resonance by spiral slit inserted on ground surface was also proposed. In order to realize high directivity and high gain of the proposed antenna, the cavity wall made of Fr4-epoxy and the metal cap were considered in design. As a result, the calculated gain of antenna with metal cap was improved about 3 dB with comparison of antenna without metal cap and the measured main beam directivity toward -z axis direction agreed well with calculation result. The measured axial ratio satisfied the circular polarization within -z axis ${\pm}45^{\circ}$ at design frequency bands and showed reasonable agreement with prediction.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.1-6
• /
• 2017

This paper presents the design of a frequency measurement device using ADC, EP2AGX FPGA and STM32 processor to accurately measure the frequency of a broadband high frequency signal. The ADC device used in this paper has a sampling frequency of 250 MSPS and a processing frequency bandwidth of 100 MHz. Due to its high sampling frequency, it is difficult to process in ordinary computers or processors, so we implemented the frequency measurement algorithm using the Altra EP2AGX FPGA. The measured frequency is sent to the direction detection controller in real time and fused with the phase signal to calculate the incident azimuth angle of the high frequency signal. The designed frequency measurement device is about 0.2 Mhz in frequency measurement error and 30% less than Anaren DFD-x, which is considered to contribute greatly to the design of radio monitoring and direction detection device.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.10a
• /
• pp.30-34
• /
• 1996

본 논문에서는 광대역 소음원의 위치를 탐지하여 2차원 영상면에 소음원을 영상화할수 있는 3차원 배열을 제안하였다. 배열 요소간의 상호상관함수가 2차원 영상면의 화소의 밝기에 대응되도록 영상함수를 유도하였으며 영상면은 사각면 및 원통면등으로 선택가능 하도록 하여 소음원의 위치동정 해석이 용이하도록 하였다. 몇가지 소음원에 대한 수치 모의실험결과는 제안된 배열이 소음원의 3차원적인 동정 해석 등에 응용될 수 있음을 보인다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5B
• /
• pp.623-631
• /
• 2001

본 논문에서는 등간격 선형어레이로 입사한 인코히어런트신호의 도래각을 추정하기 위하여 행렬특성매핑을 기본으로 한 알고리듬을 제안한다. 알로리듬의 기본 개념은 공분산 행렬 초정값과 Frobenius norm 면에서 가장 가까운 공분산 행렬 (혹은 스펙트럼 밀도행렬)을 찾는 것이다. 제안된 알고리듬의 우수한 성능을 보여주기 위하여 협대역 신호인 경우에는 MUSIC과 광대역 신호인 경우에는 CSM-MUSIC과 컴퓨터 시뮬레이션을 통하여 통계적 성능을 비교하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.53-63
• /
• 2000

전자전은 적의 전자파를 수신하여 적의 움직임을 정밀하게 탐지하는 정보수집 활동과 적이 레이더나 통신기들을 불법으로 사용하면 같은 반송파 주파수에 잡음 신호를 송신하여 적의 전파 사용을 방해하는 활동이다. 전자전 장비에 소요되는 기술은 레이더나 통신기 개발에 필요한 각종 전자, 기계, 재료 기술 외에도 광대역 주파수의 전자파의 실시간 수신기술, 실시간 복재 기술 등의 고도의 기술이 필요하다. 민과 군의 기술이 활발히 교류되는 이땐 산.학.연.군이 힘을 합쳐 연구할 수 있는 기술분야를 소개하고자 한다.

• Electrical & Electronic Materials
• /
• v.5 no.1
• /
• pp.89-98
• /
• 1992

가스절연개폐장치에서 단로기의 조작시에 발생하는 과도과전압의 측정은 최적절연설계, 신뢰성 향상, 고장탐지 등에 있어 대단히 중요하다. 본 논문은 과도과전압과 시변전계의 정확한 측정이 가능한 용량성 전계센서에 관한 것으로 측정이론, 설계, 교정기술과 실규모 GIS실험장치에서의 과도과전압의 측정에 관한 모의 실험에 대하여 기술하였다. 시제작된 센서의 변환특성은 응답매개변수에 의하여 지배되어지며 센서와 측정계의 주파수대역폭은 수 Hz~ 약 200MHz정도이었다. 실규모 GIS실험장치에 적용하여 과도과전압을 측정한 결과 센서의 우수한 응답특성이 확인되었다.