• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.101-112
• /
• 2015

II~VI compound semiconductors, $Zn_xCd_{1-x}S$ thin films have been synthesized onto indium-tin-oxide(ITO) coated glass substrates using thermal evaporation technique. The composition ratio x($0{\leq}x{\leq}1$) was varied to fabricate different kinds of $Zn_xCd_{1-x}S$ thin films including CdS(x=0) and ZnS(x=1) thin films. Then, the deposited thin films were thermally annealed at $400^{\circ}C$ to enhance their crystallinity. The chemical composition and electronic structure of films were investigated by using X-ray photoelectron spectroscopy(XPS). The optical energy gaps of the samples were determined by ultra violet-visible-near infrared(UV-Vis-NIR) spectroscopy and were found to vary in the range of 2.44 to 3.98 eV when x changes from 0 to 1. Finally, we measured the THz characteristics of the $Zn_xCd_{1-x}S$ thin films using THz-TDS(time domain spectroscopy) system to identify the capability for electronic and optical devices in THz region.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.28-29
• /
• 2005

본 논문에서는 MEH-PPV와 DFPP의 폴리머 물질을 이용하여 photovoltaic device가 제작되었고, 그림 1에 두 물질의 분자 구조가 보여진다. Photovoltaic cell의 전기-광학적 특성은 활성층의 폴리머 물질에 의해 결정된다. 이러한 특성을 알아보기 위해서 홉수 스펙트럼이 측정되었다. DFPP는 chloroform, chlorobenzen, THF, acetone에 잘 녹았으며, 본 논문에서는 chloroform이 용매로 사용되었다. 제작 공정은 다음과 같다. 인듐 주석 산화물 (ITO)이 증착된 유리기판은 photolithography 공정을 거친 후, 왕수(HNO$_{3}$ + HCL)로 식각됨으로서 전극의 패턴이 제작되었다. 그리고 ITO 전극 패턴 된 유리기판 위에 PEDOT (CH8000, Baytron)이 코팅된 후 Ar이 주입되는 Convection Oven을 이용하여 120$^{\circ}$C에서 2시간 동안 열처리되어 수분이 제거되었다. 활성층에는 MEH-PPV와 DFPP가 9:1과 2.33:1로 혼합된 폴리머가 사용되었고, 이것은 0.3 %w.t.가 되도록 chloroform에 넣어 5시간 동안 스핀바를 돌려서 용해되었다. 이 용액은 ITO 전극 패턴이 형성된 글라스 위에 3000 rpm으로 45 초간 스핀코팅 되었다. 이 때 얻어진 유기물 박막층은 80$^{\circ}$C의 Ar이 주입되는 convection oven에서 3시간 동안 경화되었다. 경화된 단층 유기물 박막층 위에 Li-Al이 1000 ${\AA}$의 두께로 증착되어 전극이 형성되었고, 이후 질소가 채워진 globe box에서 소자는 encapsulation되어 산소와 수분에 대한 영향으로부터 차단되었다. 상기의 공정으로 제작된 소자의 박막구조는 그림 2에서 보여진다. 그림 3은 MEH-PPV와 DFPP를 혼합했을 때의 흡수 스펙트럼이다. 최대 흡수 파장은 511 nm였다. 그리고 photovoltaic cell의 V-I 특성 결과가 그림 4와 같이 측정되었다. 측정에서는 300${\sim}$700 nm의 파장대를 갖는 태양광 모사계가 사용되었고, 셀의 면적은 10 mm$^{2}$였다. 그림 5의 I-V 특성으로부터 MEH-PPV와 DFPP가 9:1 로 혼합했을 때보다 2.33:1 로 혼합했을 때, photovoltaic device의 효율이 향상됨을 확인할 수 있다. 빛이 75 mW/cm$^{2}$ 의 세기로 조사될 때 9:1과 2.33:1로 혼합된 소자의 open circuit voltage (V$_{oc}$)는 비슷하지만, short circuit current Density (J$_{sc}$)는 각각 -1.39 ${\mu}$A/cm$^{2}$ 와 -3.72${\mu}$A/cm$^{2}$ 로 약 2.7배 정도 증가되었음을 볼 수 있다. 이러한 결과를 통해 electron acceptor인 DFPP의 비율이 높아질수록 photovoltaic cell의 conversion efficiency가 더 크게 됨을 확인할 수 있다. 그러므로 효율이 최대가 되는 두 폴리머의 혼합 비율이 최적화되는 조건을 찾는 것은 매우 중요한 연구가 될 것이다.

• Journal of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.85-94
• /
• 1973

The stability constants of the charge-transfer complexes formed between three derivatives of nitrobenzene, i.e., 1,3,5-trinitrobenzene, m-dinitrobenzene, nitrobenzene and eleven organic molecules such as $\alpha-picoline$, pyridine, dimethylsulfoxide, N, N'-dimethylacetamide, tetrahydrofurane, 1, 4-dioxane, diethyl ether, acetonitrile, propylene oxide, epichlorohydrine, and methyl acetate, have been determined by ultraviolet absorption spectroscopy in carbon tetrachloride solution at 25.0$^{\circ}C$. The parameters of the electrostatic effect ($E_D$) and covalent effect ($C_D$) for the eleven organic compounds have been calculated from the modified equation of the double-scale enthalpy,$logK = E_AC_A+E_DC_D$ and also the shift of C=O vibrational frequency in infrared spectra for N,N'-dimethylacetamide have been measured from the solutions of above organic compounds. The empirical equation, ${\Delta}{\nu}_{C=O} = 37.4-5.47E_D+12.1C_D$, related to the parameters and the frequency shift has been derived. It seems that the stabilities of the complexes principally depend on the covalent effect. Especially it is found that $\pi$ orbitals in molecules, in addition to the parameters, play the important role in forming the charge-transfer complexes.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.453-459
• /
• 2000

FED has deserved an intensive attentioD as a new flat panel display. The present investigationaims at undemtanding the photoluminescence and cathodoluminescent properties of hGaO$_3$: $Eu^{3+}$ phosphor bytaking into account the possibility that this phosphor could be applied for FED. In onler to investigate on.sucha detailed behavior; 8everM experimental skil18 Je conducted to the LaGaO$_3$:$Eu^{3+}$ phosphoL The excimtion srectrum artd emission spectmn were rnezsured in the UV range and then decay curve of $^5D_0$+$^7F_j$transitions\vas examined. The decay behavior of $^5D_0$ emission was anMyzed by a newly Iuoposed cross-relaxation mech-ani8In in asswiation with inteFwnter di1ffision (or migration). The cross-mlaxation from $^5D_0$ to CTB (Cha'geTransfer Band) wuld be a quite retsonable by considering the excitation spectrum. It could be also found thatthe quenching type was changed from ditfrsion controlled process to the direct quenching process -s inJeasing $Eu^{3+}$ oncntration.

• Korean Journal of Materials Research
• /
• v.28 no.9
• /
• pp.528-533
• /
• 2018

In recent years, solar cells based on crystalline silicon(c-Si) have accounted for much of the photovoltaic industry. The recent studies have focused on fabricating c-Si solar modules with low cost and improved efficiency. Among many suggested methods, a photovoltaic module with a shingled structure that is connected to a small cut cell in series is a recent strong candidate for low-cost, high efficiency energy harvesting systems. The shingled structure increases the efficiency compared to the module with 6 inch full cells by minimizing optical and electrical losses. In this study, we propoese a new Conductive Paste (CP) to interconnect cells in a shingled module and compare it with the Electrical Conductive Adhesives (ECA) in the conventional module. Since the CP consists of a compound of tin and bismuth, the module is more economical than the module with ECA, which contains silver. Moreover, the melting point of CP is below $150^{\circ}C$, so the cells can be integrated with decreased thermal-mechanical stress. The output of the shingled PV module connected by CP is the same as that of the module with ECA. In addition, electroluminescence (EL) analysis indicates that the introduction of CP does not provoke additional cracks. Furthermore, the CP soldering connects cells without increasing ohmic losses. Thus, this study confirms that interconnection with CP can integrate cells with reduced cost in shingled c-Si PV modules.

• Solar Energy
• /
• v.12 no.3
• /
• pp.10-20
• /
• 1992

In this experiment, photochemical reaction has been applied to destroy TCE in water phase. The main target of this work is to investigate the technical feasibility of large scale of solar detoxification reactor for water treatment. The results have revealed that solar detoxification utilizing photon energy from the sun is the most attractive process to decompose organic toxins in water phase at room temperature. The detailed results from this work are as follows; (1) The highest conversion ratio of TCE was obtained by using $TiO_2$, annatase as a photocatalyst among $TiO_2$ anatase, $TiO_2$ rutile and $V_2O_5$ under the same experimental condition. The anatase crystal structure was confirmed with XRD analysis, and its surface area was 7.748 $m^2/g$ from the BET-$N_2$ measurement (2) 0.1 wt% of $TiO_2$ anatase has been adopted as optimal quantity for batch slurry reactor at this experimental conditions. (3) The effect of hydrogen peroxide on the conversion of TCE was investigated. Its optimal quantity was 0.06 vol. % under this experimental conditions. (4) The effect of oxygen on the conversion of TCE also was studied by controlling the head space in photoreactor. Results indicated that sufficient amount of oxygen should be supplied to accomplish the highest conversion rate of TCE in water phase.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.44-58
• /
• 1997

The BVR CCD photometric observations of W UMa-type eclipsing binary SS Ari were made on ten nights from November 1996 to December 1996. Eight new times of minimum lights were derived. The analysis of times of minima of SS Ari confirms the suggestions of other previous investigators that the orbital period of SS Ari have been suffering from a sinusoidal varition. The amplitude and period for the cyclic period changes were calculated as about $58^{y}$ and $0.^{d}053$, respectively. The period variation has been discussed in terms of two potential mechanisms: 1) the light-time effect due to a hypothetical third body and 2) deformations in the convective envelope of a magnetically active component. In the earlier case, the third body has a mass of $1.3M_{\odot}$, if exist, in the form of a white dwarf or a binary system. It seems that the system velocities from the spectroscopic observations supports this interpretation. Meanwhile in the latter case, the primary component is mainly responsible for the magnetic activity of this system with a theoretical amplitude of $\pm0.^{m}08$. However, we cannot make a conclusion which is reasonable explanation at this point, due to lack of observational data. Moreover, the period variation of SS Ari shows duplication about $14^y$, cyclic period with an amplitude of about $0.^d001$ to the above periodic change. We also cannot make an acceptable conclusion for it at this time.

• Korean Journal of Environment and Ecology
• /
• v.25 no.5
• /
• pp.717-724
• /
• 2011

The objectives of this study were to analyze environment in the forest and growth characteristics for investigating the characteristics of Robinia pseudoacacia distribution in a Pinus thunbergii forest at the coast. As a result of analyzing inhibitory factors of Robinia pseudoacacia distribution in a Pinus thunbergii forest at the coast, it is considered that the salt level included in a sea wind is supposed to be the primary factor of the slow growth for Robinia pseudoacacia since brown leaves, wilting and early leaf fall have appeared in the 0m spot from the artificial dune which has the high salt level. However, the soil properties and light environment hardly have a effect on the growth of Robinia pseudoacacia because there is no difference among planting places. Also, the growth ring of the horizontal root in 2year individuals 0.1~0.2m away from the dune have been formed for 1 year only as a consequence of analyzing growth rings of Robinia pseudoacacia growing on the coast. It can be infered that the nourishment of the horizontal root from individuals growing on the coast have been provided for the first 1 year only. It is estimated that, in case of the nearby areas on the coast, it is not enough to provided nourishment to the horizontal root due to obstructing the growth of new individuals by a sea wind, so the growth of the horizontal root would be hampered. Therefore, it is considered that impedient Robinia pseudoacacia distribution in a Pinus thunbergii forest at the coast is caused by making no growth of new horizontal roots and newborn individuals.

• The Journal of Society for e-Business Studies
• /
• v.19 no.4
• /
• pp.73-99
• /
• 2014

Recently, big data have been studied ways to use in various fields. Big data refers to huge amounts of data that could not be addressed by conventional methods. Big data has attracted attention for improving accuracy of decision-making, forecasting in the near future, and creation of new business. In this study, it is an object to develop the utilization plan for big data in the field of technology commercialization. For this reason, we conducted study like case studies, literature review and focus group interview. We have derived the big data utilization plan based on this in the technology commercialization field. It, the data utilization plan, combines with the technology commercialization process of Jolly and it has five sub processes (Imagining, Incubating, Demonstrating, Promoting, Sustaining). In this paper, there is a significance that has emphasized the possibility for big data utilization in the technology commercialization. However, there is a limit to the general interpretation for our study. And we hope to contribute to the expansion of areas of technology commercialization information analysis through this research.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.35-40
• /
• 1999

Sr substituted materials for some barium in M-type barium ferrite powder and Co-Ti substituted Sr-Ba hexagonal ferrite powder were prepared by citrate sol-gel method and 2 MOE sol-gel method these hexaferrite particles were reduced for 1hr in the hydrogen gas. The reduction temperatures were varied in the range of 250 $^{\circ}C$ to 500 $^{\circ}C$. X-ray diffraction patterns were measured using diffractometer with Cu $K_{\Alhpa}$ radiation. Mossbauer absorption spectra were measured with a constant acceleration spectrometer. We have focused on studying the origin of increasing $M_s$ by M$\"{o}$ssbauer spectroscopy. Ferrite particles which were sintered at 105$0^{\circ}C$ were found to be typical magnetoplumbite structure and single phase. XRD patterns with varying the reduction temperatures in $Sr_{0.5}Ba_{0.5}Fe_{10}O_{19}$ indicates ferrites particles become composite hexaferrites containing $\alpha$-Fe at T_{red}=350 \;$^{\circ}C$$. On the otherhand, it was found that $Co^{2+}$ ions and $Ti^{4+}$ ions in $Sr_{0.7}Ba_{0.3}Fe_{10}CoTiO_{19}$ prevent from changing $Fe^{3+}$ ions to $\alpha$-Fe during the $H_2$ reduction. Comparing Mossbauer results with XRD results, we have determined most of $\alpha$-Fe are reduced from $4f_{vi}$ sites and 12k sites of $Fe^{3+}$ ions. These $\alpha$-Fe phase bring the induced anisotropy and increase saturation magnetization $M_s$.TEX>.