• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.10
• /
• pp.521-528
• /
• 2007

This paper proposes a new method for the high- speed penetration detection between the 3D human body model and the 3D cloth model using a virtual cylinder, and for the correction of the 3D cloth model. Penetration sometimes occurs locally, when the cloth model is adopted geometrically to the body. This method establishes the virtual cylinder surrounding the body model and the cloth model, and selects at a time the candidates of the penetrated points using the virtual cylinder. Finally, the penetrated points are detected among the candidates. Shift of the vertices or division of the edges in the penetrated points can correct the cloth model geometrically. This method works faster than the physical-based method. The latter requires the repeated detection of the penetrated points using bounding volume and the repeated corrections of the cloth model using dynamics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.137-138
• /
• 2012

본 연구에서는 가스터빈 압축기 로터용 제작 관통볼트의 건전성 검사가 수행됐다. 육안검사, 치수, 재질, 경도 및 피닝처리 등을 검사했으며 GE 볼트와 비교해 건전성을 판단하였다. 평가 결과 제작볼트는 기준범위 이하의 피닝강도로 처리되었다. 이에 숏피닝 강도를 향상시켜 다시 제작된 수정볼트를 재검사했고 모든 항목에서 기준범위에 포함됨을 확인했다. 궁극적으로 본 연구에서 수행된 가스터빈 압축기 로터용 관통볼트의 건전성 검사가 유효함을 확인하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.138-146
• /
• 2013

The present paper provides the elastic stress intensity factors(SIFs) of thick-walled cylinder with non-idealized circumferential through-wall cracks. For estimating these elastic SIFs, the systematic three-dimensional(3D) elastic finite element(FE) analyses were performed. In order to consider practical shape of thick-walled cylinder and non-idealized circumferential through-wall crack, the values of thickness of cylinder, reference crack length and crack length ratio were systematically varied. As for loading conditions, axial tension, global bending and internal pressure were considered. In particular, in order to calculate the SIFs of thick-walled cylinder with non-idealized circumferential through-wall crack from those of thick-walled cylinder with idealized circumferential through-wall crack, the correction factor representing the effect of non-idealized crack on the SIFs were proposed in this paper. The present results can be applied to accurately evaluate the rupture probabilities of nuclear piping considering actual crack growth behaviors.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.4
• /
• pp.273-280
• /
• 2016

The simulation of nondestructive testing has been used in the prediction of the signal characteristics of various defects and in the development of the procedures. CIVA, a simulation tool dedicated to nondestructive testing, has good accuracy and speed, and provides a three-dimensional graphical user interface for improved visualization and familiar data displays consistent with an NDE technique. Even though internal validations have been performed by the CIVA software development specialists, an independent validation study is necessary for the assessment of the accuracy of the software prior to practical use. In this study, time of flight diffraction signals of ultrasonic inspection of a calibration block for reactor vessel head penetrations were simulated using CIVA. The results were compared to the experimentally inspected signals. The accuracy of the simulated signals and the possible range for simulation were verified. It was found that, there is a good agreement between the CIVA simulated and experimental results in the A-scan signal, B-scan image, and measurement of depth.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.9-15
• /
• 2010

US NRC issued rulemaking of 10CFR50.55a to perform the Perservice and Inservice inspection for Reactor Vessel Head Penetration Nozzle of US Nuclaer plant. The rulemaking was required the EPRI Demonstration to verify the NDE technique performing special Ultrasonic examination. In order to meet this requirement, the UT and ECT procedures was demonstrated and the NDE personnel were qualified by EPRI. In this paper, the NDE technique and analysis method are described the Preservice inspection for the Palo Verde #1/2/3 Replacement Reactor Vessel Head Penetration Nozzle using the qualified procedures and personnel.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.469-473
• /
• 1985

The typical force-distance curves by puncture test and Back Extrusion test of acorn flour gels were investigated. Kc' and Ks' were calculated to estimate the compression and shear components of a puncture force. In this study, compression effect played a major role. The more concentration of acorn flour gel and diameter of probe increased, the more compression force contributed to the puncture force. In the Back Extrusion test, the effect of increasing the sample size was to extend the length of the plateau without affecting the maximum force. However, as the concentration of acorn flour gel increased, maximum Extrusion force became larger.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2015.10a
• /
• pp.519-520
• /
• 2015

• Journal of the Korea Computer Graphics Society
• /
• v.6 no.1
• /
• pp.11-17
• /
• 2000

We present collision-handling method that includes self-penetration in the case of the colliding between rigid and deformable objects. The collision between objects is detected through the overlap test to the hierarchical structures of the objects. For detecting the collision between the objects at in-between frame, we try overlap test using the structures of a dummy and the rigid objects in addition to the test between the rigid and deformable objects. The dummy object is made from the rigid objects moving direction. When collision occurs, a deformable object must be deformed, as the object doesn't permit penetration. Self-penetration may occur during the object is deformed. It is rapidly detected between the object and a dummy object of another type. The dummy object is made from the object's deformation area between two continuous frames. We constrain the object is deformed until it is self-contacted. Our method can be applied without concerning of the shape of a object.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.421-423
• /
• 2002

본 논문에서는 실시간에 강체 운동을 하는 일반적인 모델사이의 효율적인 충돌검사 알고리즘을 제안한다. 기존의 경계볼륨 알고리즘에 계층적 구조를 적용하였다. 이는 볼록한 물체를 위한 보로노이 영역 기반의 충돌검사 알고리즘을 오목한 물체에도 적용할 수 있도록 확장한다. 추가적으로 빠르게 움직이는 물체에 대한 관통을 탐지하기 위해서 물체의 이동 경로에 대한 교차 검사를 진행한다. 구현된 알고리즘은 일반적인 응용에서 기대한 성능 향상을 얻을 수 있다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.1
• /
• pp.29-33
• /
• 1996

The eddy current test(ECT) probe of differential encircling coil type was designed and fabricated, and the optimum condition of ECT was derived for the examination of the irradiated fuel rod. The correlation between ECT test frequency and phase & amplitude was derived by performing the test of the standard rig that includes inner notches, outer notches and through-holes. The defect of through-hole was predicted by ECT at the G33-N2 fuel rod irradiated in the Kori-1 nuclear power reactor. The metallographic examination on the G33-N2 fuel rod was Performed at the defect location predicted by ECT. The result of metallographic examination for the G33-N2 fuel rod was in good agreement with that of ECT. This proves that the evaluation for integrity of irradiated fuel rod by ECT is reliable.