• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.34-64
• /
• 1989

Corner block with anchor bolt(CBA) joint method used in knock-down type table furniture manufacturing can reduce the packing and transporting cost. Unfortunately. it also has the disastrous defect to be loosend and unstable during the service life mainly due to fatigue and creep(repeated and prolonged loading). So 22 joint groups constructed were tested to evaluate the effect of some design factors related to the size of side rail(apron). block attachment to side rail. and the number of anchor bolt as well as the effect of the type of corner block(mitered type vs. rectangular type) Usable strength from the stiffness coefficients of each joint group were analysed with SPSS /PC+ and described as the criteria of CBA joint construction. The conclusions were as follows: The height of side rail(50, 75 and 100 mm) and the addition of polyvinyl acetate(PVAc) emulsion in the corner block attactment to side rail had the effect on raising the usable strength of CBA joint with remarkable high significance. And the effect of 2 - anchor bolts was also superior to that of 1 - bolt significantly. However. the thickness of side rail(22 mm vs. 25 mm) had no effect on the strengthening the table joint rigidity. Mitered type corner block joint appeared to he recommendable for CBA jointed table construction rather than the rectangular type one regardless of the method of block attachment to side rail. The best result identified from Duncan's multiple comparison was in the construction with 25 mm thick and 100 mm height of side rail fastened using 2 - anchor bolts in mitered type corner block. But it would be reasonable to use 22 mm thick & 75 mm high side rail and mitered corner block with PVAc emulsion & 2 bolts considering the productivity and production cost down in the MDF furniture manufacturing industries.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.73-78
• /
• 2016

An increase in the transistor density of integrated circuit devices leads to a very high increase in heat dissipation density, which causes a long-term reliability and various thermal problems in microelectronics. In this study, liquid cooling method was investigated using straight microchannels with various metal bumps. Microchannels were fabricated on Si wafer using deep reactive ion etching (DRIE), and Ag, Cu, or Cr/Au/Cu metal bumps were placed on Si wafer by a screen printing method. The surface temperature of liquid cooling structures with various metal bumps was measured by infrared (IR) microscopy. For liquid cooling with Cr/Au/Cu bumps, the surface temperature difference before and after liquid cooling was $45.2^{\circ}C$ and the power density drop was $2.8W/cm^2$ at $200^{\circ}C$ heating temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.193.1-193.1
• /
• 2015

실리콘 (Si) 기판 위에 고품질의 갈륨질화물 (GaN) 박막을 성장시키기 위한 노력이 계속되고 있다. 실리콘 기판은 사파이어 기판 보다 경제적인 측면에서 유리하고, 실리콘 직접화 공정에 GaN 소자를 쉽게 접목 가능하다는 장점이 있다. GaN 박막은 2차원 전자 가스형성을 통한 고속소자, 직접 천이형 밴드갭을 이용한 발광소자 및 고전압 소자로써 활용 가능한 물질이다. 종래에는 Si(100) 및 Si(111) 기판 위에 GaN 박막 성장에 대한 연구가 주로 진행되었다. 하지만 대칭성과 격자 불일치도 등 결정학적 특성을 고려할 때 Si(100) 기판 위에 고품질의 GaN 박막을 성장시키는 것은 쉽지 않다. Si(111) 기판은 실리콘 소자 직접화 공정에 적합하지 못한 단점을 가지고 있다. 반면, 최근 Si(110) 기판 위에서 비등방적 변형 제어를 통한 고품질 GaN 박막 성장이 보고 되어 실리콘 집적 소자와 결합한 고전압 소자 및 고속소자 구현에 관한 연구가 진행되고 있다. 본 연구에서는 투과전자현미경 연구를 바탕으로 Si(110) 기판 위에 성장된 GaN의 미세구조에 관한 연구를 소개한다. 열팽창계수의 차이에 의한 GaN 박막 내 결함 생성을 줄이기 위하여 AlN 완충층이 사용되었다. GaN 박막을 암모니아 ($NH_3$) 유량이 다른 조건에서 성장시킴으로써 GaN 박막 미세구조의 암모니아 유량 의존성에 관한 연구를 진행하였다. GaN 박막에서 투과전자현미경 연구와 X-ray 회절 연구를 통하여 결함 거동 및 결정성을 확인하였다. $NH_3$ 유랑이 증가함에 따라 GaN의 성장 거동이 3차원에서 2차원으로 변화됨을 관찰하였다. 또한, 전위밀도의 증가도 확인되었다. $NH_3$ 유량이 낮은 경우 GaN 전위는 AlN와 GaN 경계에 주로 위치하고 GaN 표면 근처에는 전위밀도가 감소하였으나, $NH_3$ 유량이 높을 경우 GaN 박막 표면까지 전위가 관통됨을 확인하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.233-238
• /
• 2014

In case of the slender mass concrete like attached wall, retaining wall and bridge tower, the low heat cement and the control joint are mainly used for thermal cracking control. However, even if these cracking control methods are considered, it is impossible to control thermal cracks perfectly, because the external restraint is largely in these mass concrete. Because these cracks occurring in slender mass concrete members almost penetrate concrete member, the special cracking control is demanded in these mass concretes. The vertical pipe cooling method improving existing pipe cooling method was developed for the active thermal cracking control of slender mass concrete, and applied at the field attached wall. In results, the maximum temperature dropped more than $10^{\circ}C$ by vertical pipe cooling method, and the cracks decreased about more than 50%.

• Fire Science and Engineering
• /
• v.29 no.4
• /
• pp.67-72
• /
• 2015

A series of fire tests was conducted to examine the fire characteristics of flaming and smoldering combustion of engineered wood products, which have been widely used for furniture and finishing materials in buildings. The engineered wood products of MDF, plywood, and chipboard were ignited by a radiant cone heater with incident heat flux of $50kW/m^2$. During the fire test, key parameters representing the fire characteristics such as the heat release rate, yield rate of combustion product, and effective heat of combustion were quantified in terms of thickness. The tests show two peak points of HRRPUA due to lateral fire propagation in the initial stage, followed by later fire penetration through the specimen thickness. The mass loss rate of flaming combustion was 5 times higher than that of smoldering combustion, while the CO yield rate of smoldering combustion was 10 times higher than that of flaming combustion. This study can contribute to the understanding of fire behavior of wood combustibles and provide useful data for fire analysis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.361-368
• /
• 2014

Modal properties for tapered cantilever pipe-type beam is identified by applying the boundary conditions to a general solution for tapered beam. A bending stiffness for cracked beam is constructed based on an energy method for tapered cantilever thin-walled pipe, which has a through-the-thickness crack, subjected to bending. Then the natural frequencies and mode shapes of a tapered cantilever thin-walled cracked pipe are identified. It can be found that the phenomenon of the bending stiffness distribution along the beam length of the cracked beam is quite reasonable, the natural frequencies are decreased as the crack sizes are increased, and the mode shapes are changed due to the crack. This results may be used to the vibration-based crack identification for the tapered cantilever pipe-type tower structures.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.4 no.1
• /
• pp.20-23
• /
• 2011

Penetrating injury and retained foreign substances in human body are the main causes of visiting to the emergency room. In hand, foreign substances are caused by trauma. The most common plant pieces, the glass fragments and metal fragments should occur in the order. Especially, it's hard to find fragments of plants and plastic materials because of their radiolucency. And although these fragments are removed, it's difficult to differentiated clearly whether residual foreign bodies are in human hand or not. This study reports the authors' experience in the treatment of a patient from whom he removed a residual tree thorn in the operating room. The thorn was found 4 weeks after the trauma by ultrasonography and then the patients' symptoms were improved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.3
• /
• pp.281-288
• /
• 2016

The ballistic performance data of composite materials is distributed due to material inhomogeneity. In this paper, the uncertainty in residual velocity is obtained experimentally, and a method of predicting it is established numerically for the high-speed impact of a bullet into laminated composites. First, the failure strain distribution was obtained by conducting a tensile test using 10 specimens. Next, a ballistic impact test was carried out for the impact of a fragment-simulating projectile (FSP) bullet with 4ply ([0/90]s) and 8ply ([0/90/0/90]s) glass fiber reinforced plastic (GFRP) plates. Eighteen shots were made at the same impact velocity and the residual velocities were obtained. Finally, simulations were conducted to predict the residual velocities by using the failure strain distributions that were obtained from the tensile test. For this simulation, two impact velocities were chosen at 411.7m/s (4ply) and 592.5m/s (8ply). The simulation results show that the predicted residual velocities are in close agreement with test results. Additionally, the modeling of a composite plate with layered solid elements requires less calculation time than modeling with solid elements.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1040-1047
• /
• 2002

In this paper, we investigated noise decoupling on the power bus by the screw connection, used to the mechanical join and grounding of the PCB ground to chassis. The screw connection penetrates the power bus and then it affects noise propagation on the power bus. To verify effect of the screw connection, we compare bare board with board having screws connection with 0.5 mm separation between power bus and chassis. From these results, we observed that the power bus noise was decreased about 5 dB at the frequency range from 0.1 GHz to 1 GHz. Also, we verified that a 4-layer PCB with signal trace had the better signal quality up to 600 MHz by the screw connection. Therefore, these results will be useful in designing to the high speed circuit and chassis.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.97-101
• /
• 2017

Metal foams have a cellular structure consisting of a solid metal containing a large volume fraction of pores. In particular, open pores which are penetrable pores are necessary for industrial applications such as in high temperature filters and as support for catalysts. In this study, Fe foam with greater than 90% porosity and 2-mm pore size was successfully fabricated using a slurry coating process and the pore properties were characterized. The Fe and $Fe_2O_3$ powder mixing ratios were controlled to produce Fe foam samples with different pore sizes and porosity. First, the slurry was prepared through the uniform mixing of powders, distilled water, and polyvinyl alcohol(PVA). The amount of slurry coated with the PU foam increased with increasing $Fe_2O_3$ mixing powder ratio, but the shrinkage and porosity of the Fe foams decreased, respectively, with increasing $Fe_2O_3$ mixing powder ratio.