• Journal of Korean Orthopaedic Sports Medicine
• /
• v.11 no.2
• /
• pp.69-74
• /
• 2012

Purpose: By confirm the change of popliteal arterial position when extension or flexion of the knee and estimate the change of popliteal arterial position after posterior capsular release, we tried to know the position can minimize injury of popliteal artery during arthroscopic surgery and usefulness of posterior capsular release. Materials and Methods: Total of two middle-aged man and woman, fresh frozen cadavers as systemic, all four cases of the knee were included in this study. After the knee was flexed to 0 degrees, 30 degrees, 60 degrees, 90 degrees angle, we estimated distance from posterior tibial cortex to popliteal artery at articular surface, the distal 1 cm and 2 cm from articular surface. We performed posterior capsular release by arthroscopy, and estimated distance between posterior tibial cortex and popliteal artery in the same way. Results: Mean distance between popliteal artery and posterior tibial cortex was 6.3 mm (4.5~7), 4.6 mm (3.6~6), 4.9 mm (3.9~5.8) when knee flexion to 0 degrees at articular surface, distal 1 cm and 2 cm from articular surface each. When knee flexion to 30 degrees, it was 7.4 mm (5.2~9), 4.9 mm (3.6~7.2), 5.3 mm (3.8~6.6). When knee flexion to 60 degrees, it was 8.7 mm (5.4~11), 5.2 mm (4.9~7.3), 6.2 mm (5.4~9.6). When knee flexion to 90 degrees, it was 9.8 mm (5.8~12.1), 5.5 mm (5.1~7.4), 6.5 mm (5.4~10.7). After posterior capsule release, the distance was 6.5 mm (5.5~7.5), 5.8 mm (3.9~7.2), 5.2 mm (3.8~7.0) when knee flexion to 0 degrees, 7.7 mm (5.5~9,1), 7.1 mm (4.6~7.6), 5.5 mm (4.1~6.9) when knee flexion to 30 degrees, 8.9 mm (5.7~11.2), 8.5 mm (5.5~9.2), 6.4 mm (5.3~10.1) when knee flexion to 60 degrees and 10.2 mm (6.3~13.6), 9.5 mm (6.5~11), 6.6 mm (5.9~9.8) when knee flexion to 90 degrees. Conclusion: As knee joint is flexed, the distance from posterial tibial cortex to popliteal artery are increased beween knee joint articular surface and distal 2 cm from knee joint. So popliteal artery injury will be reduced at knee joint surgery. Posterior capsular release could also reduce popliteal artery injury by increasing distance between posterior tibial cortex and popliteal artery.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.11a
• /
• pp.29-33
• /
• 2009

단순촬영에서 견관절을 이루는 골격의 형태를 파악하고 MRI에서는 주로 회전근 개 건의 fraying및 파열, 오훼견봉인대의 견봉 부착부위의 fraying, 점액낭염, 활막염, 관절순의 병변, 연골연화와 같은 연부조직의 병변을 관찰한다. 회전근 개 파열의 고식적 MR 진단은 정확도가 93%, 민감도가 84~100%, 특이도가 88~97%, 지방억제 MR 관절강 조영술은 민감도 및 특이도가 90%및 75%에서 100%까지 최근 보고 되고 있다. 단순촬영검사로 충돌중후군의 일반적인 소견을 파악할 수 있고 impingement series에는 견관절 전후면, suprascapular outlet view (SSO), craniocaudal 30 degree tilt view (CC30T), axillary view를 포함한다. 특히 SSO에서 견봉 및 ACJ의 형태 및 골극의 유무를 파악하고, CC30T에서는 견봉 돌출의 정도를 파악할 수 있다. 최근 고해상도의 MDCT로서 얻은 3차원 영상이 충돌증후군의 전반적인 영상 소견을 파악할 수 있고 수술전 평가에 이용되고 있다. MRI 및 MR Arthrography의 영상은 일반적으로 극상건의 주행에 따른 고식적 MR 사위 관상면이 중요하고 사위 시상면에서 견봉돌기의 형태와 대결절에 부착되는 극상건의 파열 유무와 정도를 파악할 수 있다. MR 관절조영술 후 외전 및 외회전후 (ABER view)의 영상도 관절면 쪽으로 부분 파열된 극상건의 진단에 유용하다.

• Clinics in Shoulder and Elbow
• /
• v.12 no.1
• /
• pp.38-43
• /
• 2009

Purpose: The purpose of this study was to assess the efficacy of MR arthrography to detect partial thickness rotator cuff tears. Materials and Methods: One hundred and seventy seven patients with a high suspicion for rotator cuff disease were studied by performing MR-arthrography and subsequent arthroscopy. The ability of MR-arthrography to detect partial thickness tears was evaluated according to the location of the tears. We determined the correspondence between the measurements of the articular side partial tears on MR arthrography and those on the arthroscopic findings. Results: The arthroscopic diagnosis of partial thickness rotator cuff tears was divided into 3 groups according to their location. There were 63 cases on the articular side, 41 cases on the bursal side and 20 cases on both sides. The sensitivity of MR-arthrography was 82% for the articular side tears and 11% for the bursal tears. The specificity was 88% for the articular side tears and 100% for the bursal tears. MR-arthrographic measurement correctly predicted 72% in 28 repaired cases of 56 articular side partial thickness tears. Conclusions: MR-arthrography may be a reliable tool for diagnosing articular side partial thickness rotator cuff tears, but it has limitations for bursal side tears.

• Journal of the Korean Arthroscopy Society
• /
• v.8 no.2
• /
• pp.119-123
• /
• 2004

Purpose: The purpose of this study is to check the range of motion of shoulder and inverstigate the frequencies and patterns of partial thickness rotator cuff tear in SLAP lesions. Materials and Methods: Forty-six patients, forty-seven cases who had SLAP lesions at shoulder arthroscopy were analyzed spectively using the medical records, intra-operative arthroscopic photo & video for SLAP lesions and rotator cuff articular side partial tear. Under the interscalene anesthesia, the range of notion of foreward elevation, internal rotation and external rotation was measured on fixed scapula and 90 degree abduction of the shoulder. Results: The rang of Motion are 150 degree on foreward elevation, 65.5 degree on external rotation, 61.7 degree on internal rotation. By Snyder's classification, type ll SLAP lesion is noted in 24 cases (five cases in type 1, one case in type IV). Rotator cuff articular side partial tear is noted in 24 cases ( one case in type I, 22 cases in type II, one case in type IV SLAP). All the rotator cuff articular side partial thickness tear were located in the anterior part of the supraspinatus. Conclusion: The rotator cuff partial thickness tear is mostly noted on the articular side and frequently found in the relatively more unstable type of SLAP lesions. So we consider that SLAP lesion may be a one of the causes for partial tear of the rotator cuff articular side.

• Journal of Biomedical Engineering Research
• /
• v.25 no.2
• /
• pp.103-109
• /
• 2004

A virtual arthroscopy is a simulation of optical arthroscopy that reconstructs anatomical structures from tomographic images in joint region such as a knee, a shoulder and a wrist. In this paper, we propose a virtual arthroscopy based on isosurface raycasting, which is a kind of volume rendering methods for generating 3D images within a short time. Our method exploits a spatial data structure called min-max map to produce high-quality images in near real-time. Also we devise a physically-based camera control model using potential field. So a virtual camera can fly through in articular cavity without restriction. Using the high-speed rendering method and realistic camera control model, we developed a virtual arthroscopy system.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.2
• /
• pp.157-166
• /
• 2014

Purpose : The purpose of this study is to determine whether adding an angled oblique sagittal plane to the routine shoulder MRI improves the diagnostic performance in the evaluation of supraspinatus tendon tears with arthroscopic correlation. Materials and Methods: The study included 121 patients who had a shoulder MRI followed by arthroscopy. Two radiologists separately evaluated the supraspinatus tendon for tears on shoulder MRI either with or without the angled oblique sagittal images. Arthroscopy was used as the reference standard. The sensitivity and specificity for diagnosing supraspinatus tendon tears were calculated and compared by using McNemar test. Interobserver and intertechnique variability in the interpretation of supraspinatus tendon tears were calculated as a kappa value. Results: Adding the angled oblique sagittal images to the standard shoulder MRI showed improvement in the sensitivity for diagnosing full-thickness supraspinatus tendon tears and also in the sensitivity, specificity and accuracy for the detection of partial-thickness tears. However, there was no statistically significant difference in all of them between with and without the angled set. Interobserver agreement was substantial to almost perfect and intertechnique agreement was moderate. Conclusion: Adding an angled oblique sagittal plane image to the routine shoulder MRI showed no significantly different diagnostic performance in detecting the partial- and full-thickness supraspinatus tendon tears, compared to MRI without angled oblique sagittal plane.

• 대한족부족관절학회:학술대회논문집
• /
• 2008.11a
• /
• pp.38-38
• /
• 2008

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.1
• /
• pp.85-87
• /
• 2006

견갑하근 건의 파열의 흔한 원 인은 대개 외상이다. 극상근 건의 파열에 비해 드문 것으로 알려져 왔으나 최근 견관절의 관절내시경 시술이 증가함에 따라 관절면의 부분 파열이 많이 보고되고 있다. 본 증례는 40세 남자 환자로 상완골 소결절에 발생한 골극에 의한 견갑하근 건의 관절면의 부분층 파열에 대해 관절경하 골극의 제거 및 견갑하근 건의 변연절제술 후 양호한 결과를 보였다

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1665-1674
• /
• 2013

In this paper, we propose a genetic algorithm(GA) based locomotion method of a quadruped robot with waist joint, which makes a quadruped robot walk on the slop efficiently. In the proposed method, we first derive the kinematic model of a quadruped robot with waist joint and then set the gene and the fitness function for GA. In addition, we determine the best attitude for a quadruped robot and the landing point of a foot in the walk space, which has the optimal energy stability margin(ESM). Finally, we verify the effectiveness of the proposed method by comparing with the performance of the previous method through the computer simulations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.153-156
• /
• 2004

이 연구에서는 동작 포착 데이터에서 최적의 동작을 얻기 위한 비용과 시간을 줄이고, 캐릭터의 체형 크기에 무관하게 복합 지형에서 적응적인 이동 동작을 빠르고 효율적으로 생성하는 방법을 제안한다. 즉 캐릭터의 신장이나 걷는 속도, 걸음폭 등의 매개변수들을 사용하여 평지면, 경사면, 계단면 그리고 굴곡면 등 다양한 지형에서의 달리기 동작을 생성하며 역운동학(Inverse Kinematics) 개념을 적용하여 관절들의 위치나 각도를 산출하고 관절의 이동 궤적을 계산하기 위해 큐빅 스플라인 곡선을 활용한다.