• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.455-458
• /
• 2006

관성항법장치는 관성항법장치를 구성하는 관성센서인 가속도계 및 자이로의 오차요소에 의해 수평축 항법오차는 슐러주기를 가지고 서서히 증가하는 반면에 수직축 오차는 기하급수적으로 증가하는 특성을 가지고 있다. 그러므로 관성항법장치를 장시간 운용하는 경우에는 비관성 보조센서를 이용하여 관성항법장치의 수직축 항법오차에 대한 보정을 반드시 수행하여야 한다. 관성항법장치의 수직축 항법오차를 보정하기 위한 비관성 보조센서의 일종인 기압고도계는 계측된 대기압과 모델링 된 대기압을 비교하여 항체의 고도를 측정하는 방법을 이용하기 때문에 항체의 자세변화 등에 매우 민감하고 대기압 측정오차에 의해 매우 큰 진폭의 잡음 및 바이어스가 존재한다. 본 논문에서는 시뮬레이션 및 시험을 통하여 기압 고도계의 잡음 및 바이어스 오차 성분에 의한 baro-inertial 고도루프의 성능분석 결과를 제시하고 기압고도계 잡음에 둔감한 INS/기압고도계 칼만필터의 설계 결과를 제시한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.300-308
• /
• 2012

In GPS/INS/barometer navigation system for UAV, two procedures were proposed in order to set three reference parameters for the pressure altitude of QNH or QFE settings, using the navigation data from on-board system alone. These procedures yield required the reference parameters through mathematical process with the altitude and the atmosphere properties measured for a short duration of flight, of which a special pattern is requested according to the selected procedure. Dependency only upon the on-board navigation data can eliminate a requirement for the atmospheric measurement system in the ground support system and can expand a flight boundary to a remote area where the ground support is not available. Especially the procedure with the regression method uses altitude and pressure but temperature to produce the three reference parameters. No need of temperature measurement for the pressure altitude system can simplify the on-board air data system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.51-56
• /
• 2005

This paper introduces an altitude determination algorithm using GPS/INS/Baroaltimeter and evaluates the algorithm by real field tests. The test results show that the proposed method can determine the altitude of an aircraft continuously and sensitively. Therefore, it is appropriate to be used as an altimeter for a flight control system, especially for the automatic take-off and landing. In addition, it is shown that the second and the third baro-inertial vertical channel damping methods are essentially complementary filters while the proposed scheme improves these complementary filters.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.73-82
• /
• 2010

TERCOM(TERrain COntour Matching), which is the one of the Terrain Referenced Navigation and used in the cruise missile navigation system, is still under development. In this study, the TERCOM based on area-based matching algorithm and extended Kalman filter is analysed through simulation. In area-based matching, the mean square difference (MSD) and cross-correlation matching algorithms are applied. The simulation supposes that the barometric altimeter, radar altimeter and SRTM DTM loaded on board. Also, it navigates along the square track for 545 seconds with the velocity of 1000km per hour. The MSD and cross-correlation matching algorithms show the standard deviation of position error of 99.6m and 34.3m, respectively. The correlation matching algorithm is appeared to be less sensitive than the MSD algorithm to the topographic undulation and the position accuracy of the both algorithms is extremely depends on the terrain. Therefore, it is necessary to develop an algorithm that is more sensitive to less terrain undulation for reliable terrain referenced navigation. Furthermore, studies on the determination of proper matching window size in long-term flight and the determination of the best terrain database resolution needed by the flight velocity and area should be conducted.