• Korean journal of food and cookery science
• /
• v.31 no.3
• /
• pp.344-351
• /
• 2015

The purpose of this study is to improve Korean food market competitiveness in China, and to develop product diversity. Therefore, the paper will discuss and analyze the feasibility of combining Korean and Chinese cuisines. The paper is based on a SPSS-analyzed survey of 255 Jiangsu residents focusing on the concept of breakfast, and the recognition of and preference for Korean food. The result showed a high level of eating out for breakfast in Jiangsu province and the expectation of many options. The respondents generally preferred porridge, steamed stuffed dumplings, noodles and other options that are relatively convenient. Korean foods such as bulgogi, samgyeopsal, tteokbokki and bibimbap generally enjoyed a high degree of recognition and preference. This study selected bulgogi, jeyukbokkeum, dakgalbi and japchae as the stuffings for steamed dumplings and an evaluation of sensory attributes including saltiness, sweetness, spiciness, and gravy was conducted using 30 professionals. Relatively high scores were recorded in all aspects. Compared with the reference product, the dumplings with Korean food stuffing achieved higher scores. As a new development and attempt, the steamed dumplings with Korean food filling evaluated during this test demonstrated feasibility and enormous market potential. The study provides a new direction and reference value for the Chinese breakfast market and for the penetration of Korean food into the Chinese market.

• Korean journal of food and cookery science
• /
• v.31 no.4
• /
• pp.431-440
• /
• 2015

This study was performed to evaluate the quality characteristics of sausages after addition of lentil and Opuntia ficus-indica ethanol extract. Seven sausages were prepared as follows : F0 (control), F1 (5% lentils), F2 (5% lentils + 1% Opuntia ficus-indica), F3 (5% lentils + 3% Opuntia ficus-indica), F4(10% lentils), F5 (10% lentils + 1% Opuntia ficus-indica), and F6 (10% lentils + 3% Opuntia ficus-indica). Addition of lentils increase dietary fiber and starch in sausage while lowering fat content. Starch is used in manufacturing sausage to stabilize and increase viscosity. Opuntia ficus-indica contains dietary fibers and therefore addition of it to sausage increases dietary fiber, much like lentil addition. Lightness decreased and yellowness increased in all treatments. Redness was lowered by lentil addition but enhanced by addition of Opuntia ficus-indica. Redness in F3 and F5 were similar with control. But, F5 was more similar with control in all colors. Addition of lentil and Opuntia ficus-indica improved texture in hardness, springiness, gumminess, and chewiness. In sensory evaluation, color was lowered but taste was heightened by adding lentil and Opuntia ficus-indica extract. From results of this study, we could conclude that addition of mixture of lentil and Opuntia ficus-indica made sausage low in fat, with high in dietary fibers and starch. In addition, texture was increased and taste was better. F5 had the most similar color to control. We found out the optimal amounts of the two ingredients, lentil and Opuntia ficus- indica extract, were 10% and 1%, respectively.

• Korean journal of food and cookery science
• /
• v.26 no.2
• /
• pp.220-228
• /
• 2010

This study was designed to examine the effectiveness of an unused tunnel as a rice storage place. The physicochemical changes of rice grains were investigated during 8-months of storage in the tunnel located at Kyungnam province, Korea. Two kinds of tunnel stored rices, NP(rice grown with no pesticides) and LP(rice grown with less pesticides) were compared with $5^{\circ}C$ stored rice as a control. The peroxidase activities, as an index of freshness of rice grains, gradually decreased and NP appeared to be fresher than LP. Whiteness, grain wholeness, and chalkyness were less desirable for the tunnel stored rice than the control, with no significant difference of physicochemical properties, including the broken, damaged, colored rice, and contents of moisture, protein, and amylose. Palatability dropped below 70 in all three groups at later phase. The sensory evaluation showed that overall preference was slightly higher for the control but not significantly different from the other two groups. From all the evidences shown, unused tunnels may be an effective place for a long-term rice storage, since the average temperature inside the tunnel was maintained very constantly around $14.3^{\circ}C$ and relative humidity was optimal for rice storage, especially during spring and summer seasons.

• Korean Journal of Food Science and Technology
• /
• v.40 no.3
• /
• pp.337-342
• /
• 2008

In this study, HPLC was used to determine the total sugar contents of processed foods as well as main and side dishes that were acquired from noncommercial foodservices. The total sugar content was identified as the total amount of both mono- and di-saccharides according to the nutritional information standard defined by the Korea Food and Drug Administration. The results for the processed foods were as follows: $25.3{\pm}9.5%$ for biscuits, $11.7{\pm}10.6%$ for snacks, $29.9{\pm}17.7%$ for chocolate, $35.5{\pm}9.3%$ for processed chocolate products, $11.0{\pm}2.7%$ for fruit juice, $10.0{\pm}3.6%$ for carbonated beverages, $23.0{\pm}3.2%$ for ice cream, $24.5{\pm}3.2%$ for ice milk, and $11.4{\pm}2.6%$ for stirred yogurt. Overall, candy items had relatively higher total sugar contents ($71.1{\pm}19.3%$ ) than any other items. Foods in the school zone had $52.3{\pm}24.4%$ total sugars. The noncommercial foodservice foods were classified into 5 main dish categories and 12 side dish categories. The total sugar contents of the main dishes were $2.6{\pm}1.9%$ for cooked rice with seasoning, and $4.7{\pm}0.1%$ for spaghetti. Among the side dishes, hard boiled foods and stir-fried foods contained the highest amounts of sugar, which were dependent on the main ingredients in the foods. Other side dishes with high sugar contents included seasoned vegetables/dried fish/seaweed ($5.5{\pm}5.3%$), salads ($5.6{\pm}3.1%$), and kimchies ($5.7{\pm}4.1%$). The total sugar contents of the side dishes ranged widely, and were significantly different according to main ingredients, cooking method, and amount of spice.

• Journal of radiological science and technology
• /
• v.27 no.4
• /
• pp.11-16
• /
• 2004

Classification of esophageal motility disorders not yet finalized and is still ongoing as the new disorders are reported, and the existing classification is changed or removed. In terms of radiology, the primary peristalsis does not exist, and the lower end of the esophagus show the smooth, tapered, beak-like appearance. The esophageal motility disorder, which mostly occurs in the smooth muscle area, show the symptoms of reduction or loss (hypomotility) or abnormal increase (hypermotility) of peristalsis of the esophagus. It is important to understand the anatomy and physiology of the esophagus for the appropriate radiological method and diagnosis. Furthermore, the symptom of the patient and the manometry finding must be closely referred for the radiological diagnosis. The lower esophageal sphincter can be normally functioning and open completely as the food moves lower. Sperandio M et al. argues that the name diffuse esophageal spasm must be changed to distal esophageal spasm (DES) as most of the spasm occurs in the distal esophagus, composed of the smooth muscle. According to Ott et al., usefulness of barium method for diagnosing the esophageal motility disorder is Achalasia 95%, DES 71% and NEMD 46%, with the overall sensitivity of 56%. However, excluding the nutcracker esophagus or nonspecific disorder which cannot be diagnosed with the radiological methods, the sensitivity increases to 89%. Using videofluoroscopy and 5 time swallows, the average sensitivity was over 90%. In conclusion, the barium method is a simple primary testing method for esophageal motility test. Using not only the image but also the videofluoroscopy with good knowledge of the anatomy and physiology, it is believed that the method will yield the accurate diagnosis.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.337-345
• /
• 2015

After the Fukushima nuclear accident in 2011, concerns about radiation by people are increasing rapidly. If people could know how much they will be exposed by radiation, it may help them avoiding it and understand what exactly radiation is. By doing this, we were helping to reduce the anxiety of radiation contamination. In this study, we have researched figures of radioactivity with 'Captus-3000 thyroid uptake measurement systems' in well counter detector system. The materials were measured with Briquette, Shiitake, Pollock, Button type battery, Alkaline battery, Topsoil, Asphalt, Gasoline, Milk powder, Pine, Basalt stone, Pencil lead, Wasabi, Coarse salt, Tuna(can) Cigar, Beer, and then we categorized those samples into Land resources, Water resources, Foodstuff and Etc (Beer classified as a water resources has been categorized into Foodstuff). Also, we selected the standard radiation source linear 137Cs to measure the sensitivity of well counter detector. After that, we took cpm(counter per minute) for the well counter detector of thyroid uptake system's sensitivity. Then we compared the results of each material's cpm and converted those results to Bq/kg unit. There were a little limitation with the measurement equipment because it has less sensitivity than other professional equipment like 'High purity germanium radiation detector'. Moreover, We didn't have many choices to decide the materials. As a result, there are macroscopic differences among the rates of material's spectrum. Therefore, it had meaningful results that showed how much each material had emitted radiation. To compare the material's cpm with BKG, we've compounded their spectrums. By doing that, we were able to detect some differences among the spectrums at specific peak section. Lastly, Button type battery, Alkaline Battery, Briquette, Asphalt and Topsoil showed high value. There were classified emitting high radiation Group A and emitted lower radiation Group B. The Group A, alkaline battery showed higher rate of radiation by 7.67 %, and Button type battery was yield 4.65 % higher rate than BKG. Additionally, Asphalt (8.03 %), Topsoil (3.76 %), Briquette (7.46 %) were yield for higher values. Several samples of the daily supplies were yield little higher, but it seems safe to use in daily lives. In the case of the 'Foodstuff', all of the samples were safe and they were under the radiation limits of the Ministry of Food and Drug Safety for Food; thus, we highly recommend this study to you as a reference of common daily routine.

• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.411-420
• /
• 2015

Objectives : This study tries to find the educational basis based on the radiation safety knowledge, attitudes and behaviors to check the level of radiation safety behavior in domestic students who study dental hygiene. Methods : The students of 3rd and 4th grades in 83 universities which have registered on the Korean University Education Council were involved, and they were given a questionnaire for this study. The questionnaire was provided via visit with 20 copies to each university (total 1660 copies), mail by post and e-mail. Among them, we analyzed only 723 copies that we can trust. The data were analyzed with frequency, percentage, mean, standard deviation and Pearson's correlation using the SPSS/WIN 15.0. Results : As a result, there are correlations in the students' knowledge, attitudes and behaviors regarding the radiation safety management. It means that the education which can improve the knowledge and attitudes should be applied to increase the action level of the radiation safety. In addition, the physical environment is the most closely correlated with the individual behavior, so it will be limited to improve the behavioral levels of the radiation safety if the physical environment is not prepared. Therefore, the physical environment should be supported to enhance the level of the radiation safety activity, and to increase the individual attitude level of radiation safety. Conclusions : The knowledge level of the radiation safety management is relatively lower than the attitudes level, and the behavior level is the lowest. Therefore, the education policy of the safety behavior must be enhanced. For domestic students, the educational intervention is necessary to improve their behavioral level of radiation safety management because they will be able to reduce the amount of radiation exposure of their patients in dental care after getting a job.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.97-107
• /
• 2010

The objectives of this study is to figure out the unknown image processing methods of commercial CR system. We have implemented the processing curve of each Look up table(LUT) in REGIUS 150 CR system by using virtual digital test pattern method. The characteristic of Dry Imager was measured also. First of all, we have generated the virtual digital test pattern file with binary file editor. This file was used as an input data of CR system (REGIUS 150 CR system, KONICA MINOLTA). The DICOM files which were automatically generated output files by the CR system, were used to figure out the processing curves of each LUT modes (THX, ST, STM, LUM, BONE, LIN). The gradation curves of Dry Imager were also measured to figure out the characteristics of hard copy image. According to the results of each parameters, we identified the characteristics of image processing parameter in CR system. The processing curves which were measured by this proposed method showed the characteristics of CR system. And we found the linearity of Dry Imager in the middle area of processing curves. With these results, we found that the relationships between the curves and each parameters. The G value is related to the slope and the S value is related to the shift in x-axis of processing curves. In conclusion, the image processing method of the each commercial CR systems are different, and they are concealed. This proposed method which uses virtual digital test pattern can measure the characteristics of parameters for the image processing patterns in the CR system. We expect that the proposed method is useful to analogize the image processing means not only for this CR system, but also for the other commercial CR systems.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.25-29
• /
• 2010

To evaluate the usefulness of newly designed percutaneous bone biopsy needle for pumpkin's specimen collection. We manufactured three types of biopsy needle with different internal processing which were made of 10 mm-diameter acrylic material. We made the conventional type (Ct) similar to the clinical type then compared the test group. The type a (Ta) made 1 cm-length internal processing from the distal, type b (Tb) made taper, and type c (Tc) made internal processing like spiral configuration. We performed 20 times biopsy to get an 10 mm length specimen from pumpkin's surface and evaluated the success rate of the biopsy, length of the specimen, and determine internal processing type of the most suitable biopsy needle (ANOVA test). Success rates of Ct, Ta, Tb, and Tc were 55%, 80%, 90%, and 100%, respectively. The lengths of the specimen of Ct, Ta, Tb, and Tc were $5.6{\pm}1.1\;mm$, $5.9{\pm}0.87\;mm$, $3.9{\pm}0.77\;mm$, and $9.4{\pm}0.54\;mm$, respectively. All groups were statistically significant (p < 0.05) except the group between Ct and Ta (p = 0.28). Newly designed bone biopsy needle seems to be useful for obtaining enough specimen. Tc may be more effective than other types.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.283-291
• /
• 2009

Methyl Bromide that was used as fumigation gas turned out to be the substance of destroying the ozone layer. For that reason, at the Montreal Protocol in 1987 the use of methyl bromide was forbidden starting 2005 in the advanced country. Also according to the 2007 Bali Protocolly methyl bromide is expected to be forbidden and therefore the purpose of this study is to find out the effects of substitution fumigation gas (Ethylene Oxide+HFC 134a, Methyl Iodide, Cyanogen and Argon) on the metal(silver, copper and iron), wood(oregon pine), pigment(yellow, red, blue, white and black), textile(hemp, ramie, jute, silk1 and silk2 / indigo, safflower and cork) and paper. After the fumigation test, ethylene oxide+HFC 134a did not have changes in the weight and color of the material itself before and after the experiment. On exterior alteration, color change occurred partly on paper and metal. Also, in most materials color change extent was 0.5 to 1.5 on the average and showed scanty difference. The materials after the fumigation test with methyl iodide did not show weight changes after the test. However, color changes more than 1.0 was shown in most of the materials especially in dyed textile material. In blue pigment, the discoloration on the surface could be seen by naked eyes. Fumigation test with cyanogen gas did not show weight changes and discoloration is more than 1.5 before and after the test. The weight changes of test materials with the argon gas was decreased about 3 to 6%. It can be observed that discoloration on paper was generated. Color changes can be seen on jute dyed with safflower and cork for two weeks with argon gas and the extent was 6.3 and 6.0.