• Korean Journal of Legislative Studies
• /
• v.27 no.1
• /
• pp.5-40
• /
• 2021

This study attempts to analyze gender gaps in voter turnout for three different types of elections held since 2017 at the aggregate level using the Central Election Management Commission's turnout data, paying attention to the importance of women's voting. The findings are as follows. First, modern gender gaps in voter turnout at the aggregate level are confirmed in most regions regardless of election types. Second, the gender gap in turnout varies with age. The gender difference is verified in the "widowhood effect," where turnout decreases in the oldest-old. In the new voter group, modern gender gaps appear in most regions. The reversed gender difference in turnout in the late 20s, which reflects the Korean society's characteristics, is confirmed in all elections. Third, it is unclear whether the reverse gender gap in turnout becomes more pronounced in urbanized districts. As urbanization progressed, modern gender differences in voter turnout across age groups are observed at the population-based size level. Paradoxically, the modern gender gap tends to be weak and turns into the traditional gender gap in younger age groups (in the late thirties) in Gangnam-gu and Seocho-gu, the most modernized districts in Seoul. These results show that the modern gender gap in turnout is now a common phenomenon and continues to be strengthened by newly recruited voters in Korea. Thus we should pay more attention to female voters' political behavior and a new approach beyond the developmental theory to understand the causal mechanism to generate the modern gender gap in voter turnout.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.230-238
• /
• 2023

Small and medium-sized food manufacturing enterprises are largely reliant on manual labor, from inputting raw materials to palletizing the final product. Recently, there has been a trend toward smartness and digitization through the implementation of robotics and sensor data technology. In this study, we examined the effectiveness of improvement through 3D simulation on two repetitive work processes within a food manufacturing company. These processes involve workers whose speed cannot match the capacity of the applied equipment. Two manual processes were selected: the weighing and packing process performed by workers after skewer assembly, and the manual batch process of counting randomly delivered frozen foods, packing (both internal and external), and palletizing. The production volume, utilization rate, and number of workers were chosen as verification indicators. As a result of the simulation for improving the 3D process, production increased by 13.5% and 56.8% compared to the existing process, respectively. This was particularly evident in the process of applying palletizing robots. In both processes, as the utilization rate and number of input workers decreased, robots could replace tasks with high worker fatigue, thereby reducing work overload. This study demonstrates the potential to visually compare the process flow improvement using 3D simulations and confirms the possibility of pre-validation for improvement.

• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.373-380
• /
• 2013

The study aimed to develop prediction models of primal cut yield using body measurements of Hanwoo steers in Korea. The progeny of 874 steers at Hanwoo Improvement Main Center from 2008 to 2010 were recorded. Pearson's correlation coefficients for primal cuts and other traits were estimated. Primal cuts were adjusted for slaughter date and age using the SAS GLM procedure. Afterwards, a stepwise regression was performed on each primal cut by fitting body measurement traits. An independent covariable was selected at the highest coefficient of determination with the greater fitness model using Mallows's Cp statistic. Results showed that primal cuts were significantly influenced by slaughter date (P<0.01). The age at slaughter, however, was only significant for the top round (P<0.05). There was a moderate to high correlation between chest girth and tenderloin (0.54), loin (0.74), and rib (0.80). Most primal cut percentages were negatively related to BFT. Similar negative to low positive correlations were observed for primal cut percentage and body size traits. In addition, a correlation of 0.21 was observed between rib percentage and chest girth. The regression of body measurements on the adjusted primal cuts were significant for later traits. Regression estimates revealed that wither height, body length, rump length, hip bone width, and chest girth are important for primal cut weight and percentage determination. In particular, chest girth was always important for primal cut weight estimates.

• Korea journal of population studies
• /
• v.19 no.1
• /
• pp.139-159
• /
• 1996

This study comparatively examines a causal model of employee attatchment which focuses on employee's organizational commitment and intent to stay with an organization. This study is based on two separate studies of employee attachment among teachers : the U.S. case of the Chicago Public Schools (CPS) and the South Korean case of the Seoul Educational District (SED). The main purpose of this study is to replicate in Korea the CPS study. A revised model based on the unique characteristics of Korean teachers is also developed and estimated. The Price Mueller model of employee attachment provides the basic theoretical framework for this study. It includes five general classes of variables : 1) employee responses to work variables : job satisfaction, commitment, and intent to stay; 2) psychological stress variables: role ambiguity, role conflict, work overload, and quality of students; 3) social structural variables: autonomy, routinization, distributive justice, and legitimacy; 4) economic structural variables: pay, job security, promotional opportunities, and job opportunities; and 5) work orientation variables : career commitment, normative commitment, work motivation, affectivity, work values, and met expectations. The data was collected through questionnaire survey and a sample of 649 secondary school teachers in Seoul, South Korea, was included in the final analysis. Covariance structure analysis (LISREL) was used to estimate the causal model. The results indicate that the endogenous variables of job satisfaction and commitment play a considerably less important role than in the U.S. model in mediating the effects of the exogenous variables on intent to stay, and the model fails to explain the majority of the variance in intent to stay. In addition, the new variables added to the revised Korean model do not bave significant effects on intent to stay. The structural characteristics of the employment relationship and labor markets associated with Korean teachers forced mobility and closed external markets - are largely accountable for the major differences between the Korean and the U.S. cases. The study suggests that conceptual and empirical work on what produces employee attachment under these structural constraints needs to receive more attention in future studies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.175-185
• /
• 2000

This paper described on a basic study to organize fishing vessel control system in order to control efficiently fishing vessel in Korean offshore. It was digitalized ARPA image on the fishing processing of a fleet of purse seiner in conducting fishing operation at Cheju offshore in Korea as a digital camera and then simulated by used VTMS. Futhermore, it was investigated on the application of FVTMS which can control efficiently fishing vessels in fishing ground. The results obtained were as follows ; (1) It was taken 16 minutes and 35 minutes to casting and hauling net in fishing processing respectively. The length of rope pulled by scout boat was 200m, tactical diameter in casting net was 340.8m, turning speed was 6kts as well. (2) The processing of casting and hauling net was moved to SW, NE as results of simulation when the current direction and speed set into NE, 2kts and SW, 2kts respectively. Such as these results suggest that can predict to control the fishing vessel previously with information of fishing ground, fishery and ship's maneuvering, etc. (3) The control range of VTMS radar used in simulation was about 16 miles. Although converting from a radar of the control vessel to another one, it was continuously acquired for the vector and the target data. The optimum control position could be determined by measuring and analyzing to distance and direction between the control vessel and the fleet of fishing vessel. (4) The FVTMS(fishing vessel traffic management services) model was suggested that fishing vessels received fishing conditions and safety navigation information can operate safely and efficiently.

• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.28-38
• /
• 1981

A survey has been conducted to investigate the presents of breaks down and repair of power tiller for efficient use. Eight provinces were covered for this study. The results are summarized as follows. A. Frequency of breaks down. 1) Power tiller was breaken down 9.05 times a year and it represents a break down every 39.1 hours of use. High frequency of breaks down was found from the fuel and ignition system. For only these system, the number of breaks down were 2.02 and it represents 23.3% among total breaks down. It was followed by attachments, cylinder system, and traction device. 2) For the power tiller which was more than six years old, breaks down accured 37.7 hours of use and every 38.6 hours for the power tiller which was purchased in less than 2 years. 3) For the kerosene engine power tiller, breaks down occured every 36.8 hours of use, which is a higher value compared with diesel engine power tiller which break down every 42.8 hours of use. The 8HP kerosene engine power tiller showed higher frequency of break down compared with any other horse power tiller. 4) In October, the lowest frequency of break down was found with the value of once for every 51.5 hours of use, and it was followed by the frequency of break down in June. The more hours of use, the less breaks down was found. E. Repair place 1) 45.3% among total breaks down of power tiller was repaired by the owner, and 54.7% was repaired at repair shop. More power tiller were repaired at repair shop than by owner of power tiller. 2) The older the power tiller is, the higher percentage of repairing at the repair shop was found compared with the repairing by the owner. 3) Higher percentage of repairing by the owner was found for the diesel engine power tiller compared with the kerosene engine power tiller. It was 10 HP power tiller for the kerosene power tiller and 8 HP for the diesel engine power tiller. 4) 66.7% among total breaks down of steering device was repaired by the owner. It was the highest value compared with the percentage of repairing of any other parts of power tiller. The lowest percentage of repairing by owner was found for the attachments to the power tiller with the value of 26.5%. C. Cause of break down 1) Among the total breaks down of power tiller, 57.2% is caused by the old parts of power tiller with the value of 5.18 times break down a year and 34.7% was caused by the poor maintenance and over loading. 2) For the power tiller which was purchased in less than two years, more breaks down were caused by poor maintenance in comparison to the old parts of power tiller. 3) For the both 8-10 HP kerosene and diesel engine power tiller, the aspects of breaks down was almost the same. But for the 5 HP power tiller, more breaks down was caused by over loading in comparison to the old parts of power tiller. 4) For the cylinder system and traction device, most of the breaks down was caused by the old parts and for the fuel and ignition system, breaks down was caused mainly by the poor maintenance. D. Repair Cost 1) For each power tiller, repair cost was 34,509 won a year and it was 97 won for one hoar operation. 2) Repair cost of kerosene engine power tiller was 40,697 won a year, and it use 28,320 won for a diesel engine power tiller. 3) Average repair cost for one hour operation of kerosene engine power tiller was 103 won, and 86 won for a diesel engine power tiller. No differences were found between the horse power of engines. 4) Annual repair cost of cylinder system was 13,036 won which is the highest one compared with the repair cost of any other parts 362 won a year was required to repair the steering device, and it was the least among repair cost of parts. 5) Average cost for repairing the power tiller one time was 3,183 won. It was 10,598 won for a cylinder system and 1,006 won for a steering device of power tiller. E. Time requirement for repairing by owner. 1) Average time requirements for repairing the break down of a power tiller by owner himself was 8.36 hours, power tiller could not be used for operation for 93.58 hours a year due to the break down. 2) 21.3 hours were required for repairing by owner himself the break down of a power tiller which was more than 6 years old. This value is the highest one compared with the repairing time of power tiller which were purchased in different years. Due to the break down of the power tiller, it could not be used for operation annually 127.13 hours. 3) 10.66 hours were required for repairing by the owner himself a break down of a diesel engine power tiller and 6.48 hours for kerosene engine power tiller could not be used annually 99.14 hours for operation due to the break down and it was 88.67 hour for the diesel engine power tiller. 4) For both diesel and kerosene engine power tiller 8 HP power tiller required the least time for repairing by owner himself a break down compared with any other horse power tiller. It was 2.78 hours for kerosene engine power tiller and 8.25 hours fur diesel engine power tiller. 5) For the cylinder system of power tiller 32.02 hours were required for repairing a break down by the owner himself. Power tiller could not be used 39.30 hours a year due to the break down of the cylinder system.