• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2005.05a
• /
• pp.231-234
• /
• 2005

본 실험은 돈육 후지 부위를 이용하여 육포 제조시 텀블링 시간에 따른 육포의, 이화학적 및 관능적 특성을 조사하여 표준화된 육포제조의 기초 자료를 제공하고자 실시하였다. 텀블링 시간에 따른 건조전 육포 양념육의 제품수율은 30분까지는 수율이 유의적으로 증가하는 경향을 보였으나, 60분 동안 텀블링을 실시하였을 때는 30분보다 낮은 값을 나타내었다. 텀블링 시간에 따라 pH는 차이가 없었으나, 보수력은 텀블링 30분까지 유의적으로 증가하였고 이후 부터는 차이가 없었다. 육색은 텀블링 시간이 경과함에 따라 $L^{\ast}-$값과 $b^{\ast}-$값은 감소하는 경향을 보였으나 반대로 $a^{\ast}-$값은 텀블링 시간이 증가함에 따라 점점 증가하는 경향을 보였다. 건조후 제조된 돈육육포의 수분함량은 $29{\sim}30%$ 정도를 유지하였으며, 건조수율은 모두 $48{\sim}49%$ 정도의 높은 수율을 보였다. 육포의 $L^{\ast}-$값은 30분 및 60분 동안 텀블링을 실시하였을 때 10분 동안 텀블링을 실시한 육포보다 낮게 나타났다. 60분 동안 텀블링한 육포의 $a^{\ast}-$값은 10분간 텀블링한 것보다 높았으며, $b^{\ast}-$값은 $a^{\ast}-$값과는 반대의 경향을 나타내었다. 탄력성(springiness)은 60분 동안 텀블링한 육포가 10분 동안 텀블링한 육포보다 높은 값을 보였으나, 탄력성을 제외한 모든 항목에서 유의차가 나타나지 않았다. 관능검사는 모든 항목에서 30분 이상 텀블링한 육포가 좋은 평가를 받았으나, 처리구간에 유의차는 나타나지 않았다.pm을 spiking한 후 SPE상에서 SCX(Strong cation exchange column)을 통한 clean-up과정을 거친 후의 STP의 limit of quantification(LOQ)는 약 0.44ppm이었으며, 이에 대한 회수율은 89.7${\pm}$2.3%(n=6)를 나타냈다. 실제 CODEX에서 권장한 우유의 MRL이 0.6ppm인 점을 감안하면 CODEX권고치에 도달할 수 있는 것으로 판단되었다. 따라서 본 연구에서 개발 된 시험법은 지금까지 국내적으로 STP에 대한 시험법이 확립되어 있지 않은 것으로 이와 아울러 간편한 parallux와 병용해 STP에 대한 정량 및 정성 분석을 유도체화 장치 및 형광검출기를 이용해 잔류항생물질 STP에 대한 분석시험법을 개발하였다.화와 네트워크 조직망 구축을 위한 지역중심의 복합 생활문화 공간이 필요할 것이며, 이를 촉진키 위한 mentor academy시스템 접근을 통해 점점 고령화되어 가고 있는 재래시장에 대해 차별적 특성이 반영된 종합적이고 체계적 접근 방법연구가 필요하다./TEX> 자체기술개발, 선진기술 도입, 산업간 및 산업내 기술확산, 국제기술협력 ${\rightarrow}$ 기술혁신의 촉진 ${\rightarrow}$ 총요소생산성과 기업경쟁력(자원 및 역량, 프로세스 경쟁력, 품질경쟁력, 시장경쟁력, 고객성과, 시장성과, 재무성과)의 제고 ${\rightarrow}$ 가격경쟁력(임금, 금리, 물류비용, 환율 등)과 비(非)가격경쟁력(디자인, 에프터서비스, 품질, 운송 등)의 제고 ${\rightarrow}$ 국가경쟁력의 제고 ${\rightarrow}$ 국제수지 흑자 ${\ri

• Journal of ILASS-Korea
• /
• v.11 no.1
• /
• pp.39-47
• /
• 2006

In-cylinder flows in a motored 3.5L four-valve SI engine were investigated quantitatively using three-component LDV system, to determine how engine configuration affects the flow field. The purpose of this work was to develop quantitative methods which correlate in-cylinder flows to engine performance. For this study, two distinct intake/piston arrangements were used to examine the flow characteristics. Quantification of the flow field was done by calculating two major parameters which are believed to characterize adequately in-cylinder motion. These quantities were turbulent kinetic energy(TKE) and tumble ratio in each plane at each crank angle. The results showed that in-cylinder flow pattern is dominated by the intake effects and two counter rotating vortices, developed during the intake stroke, produced relatively low tumble ratio. Therefore, the applicability of these quantities should be carefully considered when evaluating characteristics resulting from the complex in-cylinder flow motions.

• Bulletin of the Korean Space Science Society
• /
• 2006.04a
• /
• pp.121-124
• /
• 2006

B-dot logic is generally used for controlling the initial tip-off rate. However, it has the disadvantage of taking a relatively long time to control the initial tip-off rate. To solve this problem, this paper suggests a new detumbling control method to be able to adapt to micro/nanosatellite with the pitch bias momentum system. Proposed detumbling method was able to control the angular rate within 20 minutes which is a significant reduction compared to conventional methods.

• Food Science and Preservation
• /
• v.31 no.3
• /
• pp.423-432
• /
• 2024

In this study, a vacuum tumbler with 4 impellers (DVT) was designed and applied for thawing frozen pork (vacuum -60 kPa, jacket 35℃, 1 rpm). Quality characteristics of the thawed pork were compared with those of industrially thawed meat by natural air at room temperature (NAT) and imported vacuum tumbler (IVT). The thawing time for frozen pork (303.36 kg) using DVT (165 min) was much shorter than that of NAT (4,200 min). DVT-thawed pork had lower drip loss (0.85%) than NAT (2.08%). DVT-thawed pork showed a pH of 5.92, a total bacterial count of 1.96±0.02 log CFU/g and no coliforms. Deteriorations in fat (TBARS 0.31±0.01 MDA mg/kg) and protein (VBN 5.67±1.98 mg%) in DVT-thawed pork were significantly lower than those of NAT (p<0.05). DVT-thawed pork had a high water-holding capacity (WHC, 97.5%). The hardness (34.59±0.46 N) and chewiness (188.21±0.17) of cooked DVT-thawed pork were about 5-6 times lower than those of NTA. Microstructure (SEM) showed myofibrillar damage in NAT-thawed pork, whereas dense myofibrillar structure was observed in DVT-thawed pork. DVT was better or similar to IVT in all evaluation parameters. The designed DVT is expected to be used as an efficient thawing method in terms of processing time and yield and to produce thawed meat with high WHC, soft texture, and low spoilage by minimizing tissue damage.

• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.88-97
• /
• 2023

As livestock consumption in Korea has been gradually increasing, the quality of the final products has been improved to meet this increased demand. In particular, maintaining the water holding capacity (WHC) and minimizing the drip loss during the thawing of frozen meat are of utmost importance. This study investigated the physicochemical properties of frozen pork subjected to thawing under different conditions: at room temperature (20℃, under air), at a low temperature (4℃ refrigerator, under air), under water (20℃, under water in a vacuum bag), under microwave (microwave-thawing, 260 W), and under low-pressure tumbling (20℃, 0.015 bar, tumbling). The shortest thawing time for frozen pork was recorded upon low-pressure tumbling thus indicating a fast heat transfer. The lowest drip loss (0.2%) and highest WHC (94.5%) were also recorded under this condition. A significantly higher drip loss was observed upon microwave- (1.0%) and water-thawing (1.2%), which resulted in the lowest WHC in microwave thawing (87.2%). The highest total count of aerobic bacteria and coliform group were observed upon room temp thawing while the low pressure tumbling and thawing resulted in the lowest aerobic bacteria (1.90 log CFU/g) and coliform (0.78 log CFU/g) count. Consequently, thawing by low pressure tumbling afforded the best food quality.