• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.27-28
• /
• 2012

본 논문은 태양광 발전의 주변 환경 변화에 종속적인 태양광 모듈 출력을 개선하기 위해 사용되는 태양광 발전 시스템용 DC-MIC (Module Integrated Converter) 의 효율 향상을 위한 주파수 제어 기법을 제안한다. 최적 주파수 제어 기법을 위해 전부하 범위 DC-MIC의 효율을 이론과 실험을 통해 분석하였고 이를 바탕으로 기존의 고속의 스위칭 주파수 대비 스위칭 주파수를 낮춰 효율을 높이고 과도 상태 구간 동안 주파수를 높여 시스템 응답 속도를 높이는 시스템을 구현한다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.443-444
• /
• 2019

DC마이크로그리드에서, 양방향 컨버터를 통한 계통과 배터리와의 전력교환은 필수적으로 요구 된다. 일반적으로 계통이 연결 되었을 때 배터리를 충전시키고, 계통이 끊어 졌을 때는 배터리를 통해 계통에 전력을 공급하는 양방향 동작을 한다. 이러한 전력방향전환 과도상태를 줄이기 위해 무순단 절체 기능이 필요한데, 전류 제어기를 공유하는 방식의 경우 전압제어기의 포화가 발생하면 양방향 컨버터의 출력응답이 늦어지거나, 출력이 불안정해 진다. 이 문제를 해결하기 위해 양방향 컨버터의 대표적인 포화방지(Anti-windup)기법을 적용하여 성능을 비교하였다. 또한 PSIM 소프트웨어를 통해 DC마이크로그리드 시스템을 구현해 효과를 확인한다.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.15-20
• /
• 2011

This study was conducted to evaluate the characteristics of installation dimensions of speed control humps based on the theoretical dynamic analyses. The field surveys of speed control humps were performed first to compare their sizes with those suggested in the installation standard. Then, the displacement response spectra under impact loads were obtained using the single degree of freedom models where the vehicle and human were assumed to combine completely. The analysis results showed that the human perception became larger as the width and height of the humps increased, but the extremely higher uncomfortableness should be avoided. In addition, the ratio between the width and height should be considered when the humps are designed and installed because the ratio governs the vertical acceleration magnitude.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.879-886
• /
• 2003

Agile frequency synthesizers are the common device used for commandable, wide-band frequency hopping in frequency-hopped (FH) communications. In this paper, synthesizer phase transient effect and its compensation methods in an FH/FSK(Frequency Hopped Frequency Shift Keying) system are studied. Models for these analysis are developed and resulting performance degradations are computed. The basic PLL is difficult to implement for fast frequency hopping in narrowband radio communication systems. To solve this problem, digital frequency synthesizer/CPM (Continuous Phase Modulation)modulator is proposed. And it's performance is analyzed theoretically. The analysis show that fast frequency hopping is possible in frequency hopping system that use digital frequency synthesizer/CPM modulator.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.1
• /
• pp.37-46
• /
• 2003

The transient responses on arbitrarily interconnected digital transmission lines are analyzed by an efficient node discretization technique. Since the proposed node discretization technique offers an efficient means to discretize transmission lines, the transient waveform at any position on the arbitrarily interconnected lines is easily predicted. Dispersive microstrip multiconductor transmission lines arbitrarily connected are analized for generality. The derivation of frequency-dependent equivalent circuit elements of coupled transmission lines have been carried out by the spectral domain approach(SDA). The effects of variations of excited pulse width on the crosstalks of the high-speed microstrip coupled-lines are also investigated. It has been well known that the crosstalk spike level is monotonously increased when the coupling length and effective permittivity of substrate are increased. In this paper, it is found that the variations of crosstalk level are not further monotonous as shortening the exciting pulse width toward several picosecond. The results are verified by the generalized S-parameter technique.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.33-40
• /
• 2009

This paper presents the high performance control of interior permanent magnet synchronous motor(IPMSM) using space vector(SV) PWM method based on hybrid artificial intelligent(HAI) controller. The HAI controller combines the advantages between adaptive fuzzy control and neural network The SV PWM method is applied to a speed control system of motor in the industry field until now and is feasible to improve harmonic rate of output current, switching frequency and response characteristics. This HAI controller is used instead of conventional PI controller in order to solve problems happening when calculating a reference voltage. The HAI controller improves speed performance by hybrid combination of reference model-based adaptive mechanism method, fuzzy control and neural network. This paper analyzes response characteristics of parameter variation, steady-state and transient-state using proposed HAI controller and this controller compares with conventional fuzzy neural network(FNN) and PI controller. Also, this paper proves validity of HAI controller.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.361-370
• /
• 2024

In this paper, a method was studied for applying a series resonant type fault current limiter that can be manufactured at low cost to the smart grid distribution system. First, the impact of the harmonic components of the short-circuit fault current injected into the series resonance circuit of the fault current limiter on the peak value of the transient response was analyzed, and a methodology for determining the steady-state response was studied using percent impedance-based fault current computation method. Next, the effectiveness of the method was verified by applying it to a test distribution line. The test distribution system using the designed current limiter was modeled using EMTP_RV, and a three-phase short-circuit fault was simulated. In the fault simulation results, it was confirmed that the steady-state response of the fault current accurately followed the design target value after applying the fault current limiter. In addition, by comparing the fault current waveform before and after applying the fault current limiter, it was confirmed that the fault current was greatly suppressed, confirming the effect of applying the series resonance type current limiter to the distribution system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.117-132
• /
• 2014

This paper had a purpose on analyzing result data from pan-sharpening, which have applied on the KOMPSAT-2 and -3 image. Particularly, the study focused on comparing each relative spectral response functions, which considers to cause color distortions of fused image. Two images from same time and location have been collected by KOMPSAT-2 and -3 to apply in the experiment. State-of-the-art algorithms of GIHS, GS1, GSA and GSA-CA were employed for analyzing the results in quantitatively and qualitatively. Following analysis of previous studies, GSA and GSA-CA methods resulted excellent quality in both of KOMPSAT-2/3 results, since they minimize spectral discordances between intensity and PAN image by the linear regression algorithm. It is notable that performances from KOMPSAT-2 and- 3 are not equal under same circumstances because of different spectral characteristics. In fact, KOMPSAT-2 is known as over-injection of low spatial resolution components of blue and green band, are greater than that of the PAN band. KOMPSAT-3, however, has been advanced in most of misperformances and weaknesses comparing from the KOMPSAT-2.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.103-116
• /
• 2017

The objective of this study is to examine the effect of the serve employee which is thought as important but has not been studied almost on the response actions to the customer and organization. we tried provide the administrative implications for the black consumer management. This study built a exploratory empirical model that there is causal relationship of the service sector employee on the attitude to the customer and organization on the base of the exploratory consideration. To test hypotheses empirically, the questionnaire data were collected from 262 members of service sector in Busan and was analyzed by using Regression Analysis. Results of empirical analysis are as follow. 1) perceived black consumer behavior which service sector employee has the significant positive effect on the misbehavior to the customer. looking in detail, repetitiveness, insistence, deception, excessiveness are significant positive effect on the misbehavior to the customer. 2) perceived black consumer behavior which service sector employee has the significant positive effect on the misbehavior to the organization. looking in detail, excessiveness only have a positive effect on the misbehavior to the organization. 3) The significance of this study indicates that encourage plays a role as moderating variable influencing the relationship between perceived black consumer behavior and employee misbehavior. Specifically, The significance of this study indicates that encourage plays a role as moderating variable influencing the relationship between perceived excessiveness which the demension of the black consumer behavior and employee misbehavior. Lastly, this study suggested the implication of the result, the limitation and the direction of future study. The results of this study provide suggestion to the company.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.6
• /
• pp.543-552
• /
• 2011

Control Moment Gyro(CMG) is one of the most efficient momentum exchange devices for satellite attitude control and CMG is very essential device for agile satellite. In this study, the essential dynamic equation for the design of gimbal motor and wheel motor is summarized. The development process of SGCMG hardware for agile small satellite system, the description of developed hardware and its performance test results are presented. Test result shows that the developed hardware model can produce an output torque more than 1.2Nm as designed. Other test items are max. torque, gimbal bandwidth, minimum torque, torque error, gimbal rate error.