• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.61-63
• /
• 1999

This paper presents an efficient method for analysis of magnetodynamic system using frequency-dependent parameters. In equivalent electric circuit of linear magnetodynamic system, parameters of inductance and resistance are not constant since they vary with its driving frequency. Once frequency-dependent parameters of equivalent electric circuit for a given system are extracted, they can be used to analyze various characteristics of system. We use the Fourier transform, the high-order sensitivity method and Taylor series in order to efficiently extract the frequency-dependent parameters of magnetodynamic system. The proposed algorithm is applied to an induction heating system to validate its numerical efficiency.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.64-66
• /
• 1998

This paper presents a new efficient method for transient analysis in magnetodynamic systems of linear eddy current problems. This mehtod employs the Fourier transform and the high-order frequency sensitivity of harmonic finite element method. By taking into account the time-constant of magnetodynamic system, the Fourier integral of continuous frequency is converted into the Fourier series of discrete frequency. And with the results of Fourier series expansion of converted input wave form, the responses of each sinusoids is superposed to give the total response of the magnetodynamic systems. But, if the frequency band of input wave form is broad, it takes long computational time since all responses for each sinusoids must be calculated. Therefore, the high-order frequency sensitivity method is employed to estimate the response variation to frequency. The proposed algorithm is applied to an induction heating system to validate its numerical efficiency.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.78-81
• /
• 2002

The paper discuses characteristics of an axial-flux permanent-magnet generator for a gearless wind energy system which aims to be satisfied with variable operating conditions. Design and construction of an axial-flux permanent- magnet generator with power output at 60[Hz], 300[r/min] for wind energy system is introduced. Finite-element method (FEM) is applied to analyze generator performance at variable load. The results of FE analysis show this generator Is feasible for use with a wind turbine.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2142-2148
• /
• 2009

A microgrid is defined as two or more distributed generation or storage assets configured in a networks and capable of operation in parallel or independently form a larger electric gird, while providing continuous power to one or more end users. And when microgrid are separated from grid oprating protection devices by faults of the grid side, microsources should charge electrical power needs of loads in microgrid and operate maintaining power quality. The magnitude of the switching transients will vary based on voltage phase difference between microgrid and grid, when the microgrid is resynchronized to grid. In this paper, when microgrid is resynchronized to grid, we analyzed the existing problems for reducing switching transients of SS(Static Switch).

• Annual Conference of KIPS
• /
• 2008.05a
• /
• pp.725-728
• /
• 2008

최근 급격한 사회발전으로 인한 인간소외, 과도한 업무 스트레스, 가족관계 등의 사회 문제가 야기되고 있으며, 이는 전문적인 심리상담 도움을 받아야 할 만큼 심각한 정신건강의 위기상태라 할 수 있다. 이에 따라 심리검사에 대한 중요성이 부각되고 있음에도 불구하고, 검사자의 전문적 훈련정도에 따른 해석 차이로 인하여 검사의 신뢰성 저하와 같은 다양한 문제점이 발생되고 있다. 또한 심리검사는 특성상 검사자와 피험자간의 커뮤니케이션을 통해 이루어지는 주관적인 검사이므로 의사소통에 문제가 있는 중증 장애우 및 외국인, 영유아 피험자들의 검사가 힘든 실정이다. 이에 본 논문에서는 사용자 뇌파 패턴분석을 통해 기존의 주관적인 심리검사 기법을 객관화함으로써 뇌파측정만으로도 심리검사가 가능한 BCI기반 심리검사 시스템을 구현한다.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.215-221
• /
• 1993

A required initial condition for a steam explosion to occur following core meltdown accidents of a nuclear power plant is the formation of a coarse mixture of molten fuel and water. The extent of a premixing is the measure of efficiency of steam explosion that may follow. A simple one-dimensional, transient model and the flooding criteria have been applied to evaluate the fuel/coolant mixing limit. Also, both instant breakup and dynamic breakup models for the mixing process have been separately used here and compared each other. The results indicate that fuel temperature, ambient pressure, mixing diameter, water depth, and pouring diameter are the important parameters affecting the mixing behavior.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.1
• /
• pp.9-16
• /
• 2009

The analysis of an aircraft flight dynamics is recently very convenient because of the introduction of state-space method and a well-developed package software. The representation of a dynamic system is described as a simple form of matrix calculation and the unique form of model is available for the linear or nonlinear, time variant or time invariant, mono variable or multi variable system with state-space method. And this analysis can be simplified with the specific functions of a package software and it is very simplified to execute the simulation of the dynamic characteristics for an aircraft model with an interactive graphical treatment. The purpose of this study is to develope an educational flight simulator for the students who need to analyze the dynamic characteristics of an aircraft that is primarily to execute the simulation for the analysis of the transient response and frequency response of an aircraft stability. Furthermore the dynamic characteristics of an aircraft motion is set up as dynamical animation tool for the control response on 3-axis motions of an aircraft.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.213-216
• /
• 2003

Recently a new high power device GCT (Gate Commutated Turn-off) thyristor has been successfully introduced to high power converting application areas. GCT thyristor has a quite different turn-off mechanism to the GTO thyristor. All main current during turn-off operation is commutated to the gate. Therefore, IGCT thyristor has many superior characteristics compared with GTO thyristor; especially, snubberless tum-off capacibility and higher turn-on capacibility. The basic structure of the GeT thyristor is same as that of the GTO thyristor. This makes the blocking voltage higher and controllable on-state current higher. The turn-off characteristic of the GCT thyristor is influenced by the minority carrier lifetime and the performance of the gate drive unit. In this paper, we present turn-off characteristics of the 2.5kV PT(Punch-Through) type GCT as a function of the minority carrier lifetime and variation of the doping profile shape of p-base region.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.68-81
• /
• 1995

This paper presents an analytical solution to predict the transient temperature distribution in fillet arc welding. The analytical solution is obtained by solving a transient three -dimensional heat conduction equation with convection boundary conditions on the surfaces of an infinite plate with finite thicknesses, and mapping an infinite plate onto the fillet weld geometry with energy equation. The electric arc heat input on fillet weld and on infinite plate is assumed to have a traveling bivariate Gaussian distribution. To check the validity of the solution, GTA and FCA welding experiments were performed under various welding conditions. The actual isotherms of the weldment cross - sections at various distances from the arc start point are compared with those of simulation result. As the result shows a satisfactory accuracy, this analytical solution can be used to predict the transient temperature distribution in the fiIIet weld of finite thickness under a moving bivariate Gaussian distributed heat source. The simplicity and short calculation time of the analytical solution provides rationales to use the analytical solution for modeling the welding control systems or for an optimization tool of welding process parameters.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.499-501
• /
• 2008

본 논문은 공진요소를 포함한 고전압 플라이백 컨버터의 설계 절차를 제시하는 것으로써, 고압 플라이백 컨버터 설계 시 기존 플라이백 컨버터의 Power Stage 설계 식을 적용하였을 때 원하는 출력 전압을 얻지 못한다. 고전압을 발생시키기 위한 고전압 플라이백 변압기는 2차 측의 많은 권선수와 높은 전압 때문에 기생 커패시턴스(parasitic capacitance)가 매우 크고, 과도상태에서 컨버터 전류 및 전압의 기생 공진(parasitic resonance)이 심각하게 발생한다. 이러한 공진요소를 고려하여 고전압 플라이백 컨버터의 특성을 해석하고 설계 절차를 제시한다. 이를 통해 고전압 플라이백 컨버터의 소형화 및 경량화를 도모하고, 고압 전원장치의 기술 축적을 위해 연구되었다. 제안된 회로의 동작원리를 설명하고, 타당성을 실험을 통하여 검증한다.