• Membrane Journal
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2006

Nanofiber is a broad phrase generally referring to a fiber with diameter less than 1 micron. Various polymers have been successfully electrospun into nanofibers in recent years. These nanofibers, due to their high surface area and porosity, have a great potential for use as filter medium, adsorption layers in protective clothing, etc. Nanofiber filters will enable new levels of filtration performance in the field of air filtration. In particular, nanofibers provide marked increases in filtration efficiency at relatively small pressure drop in permeability. Therefore, nanofiber filters could be substituted for conventional filter market due to the easy application of process and the possibility of coating to micron-sized non-woven sheets. This review is discussed on the trend of researche and development related to nanofiber filter including future marketability.

• Journal of Surface Science and Engineering
• /
• v.50 no.6
• /
• pp.473-479
• /
• 2017

CrN coatings have been used as protective coatings for cutting tools, forming tools, and various tribological machining applications because these coatings have high hardness. Cr-Al-N coatings have been investigated to improve the properties of CrN coatings. Cr-Al-N coatings were fabricated by a hybrid physical vapor deposition method consisting of unbalanced magnetron sputtering and arc ion plating with different working pressure and substrate bias voltage. The phase analysis of the composition was performed using XRD (x-ray diffraction). Cr-Al-N coatings were grown with textured CrN phase and (111), (200), and (220) planes. The adhesion strength of the coatings tested by scratch test increased. The friction coefficient and removal rate of the coatings were measured by a ball-on-disk test. The friction coefficient and removal rate of the coatings decreased from 0.46. to 0.22, and from $2.00{\times}10^{-12}m^2/N$ to $1.31{\times}10^{-13}m^2/N$, respectively, with increasing bias voltage. The tribological properties of the coatings increased with increasing substrate bias voltage.

• Journal of the Korean Institute of Gas
• /
• v.2 no.2
• /
• pp.34-39
• /
• 1998

Demand of the clean and convenient natural gas has continuously increased with recognizing of the environment problem since liquefied natural gas was introduced in Korea. Clean fuel natural gas was supplied to each city through high tensile strength pipeline connected by welding. Grades of pipeline were divided into the high and middle pressure according to supply pressure. Pipeline was welded mainly SMA welding process due to its easy handling, the other welding process was adopted according to the constructing condition. We were examined on the microstructure variation and mechanical properties of weld metal for high pressure pipeline, API 5L X-42.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.501-503
• /
• 2017

In the water sector, various data such as flow rate, pressure, water quality and water level are collected during the whole process of water purification plant and piping system. The collected data is stored in each water treatment plant's DB, and the collected data are combined in the regional DB and finally stored in the database server of the head office of the Korea Water Resources Corporation. Various abnormal data can be generated when a measuring instrument measures data or data is communicated over various processes, and it can be classified into missing data and wrong data. The cause of each abnormal data is different. Therefore, there is a difference in the method of detecting the wrong side and the missing side data, but the method of cleansing the data is the same. In this study, a program that can automatically refine missing or wrong data by applying deep learning LSTM (Long Short Term Memory) algorithm will be studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5737-5742
• /
• 2015

Insert injection molding is a process in which molten plastic is injected into a mold that contains a pre-placed insert. During the injection stage, the insert can be deformed by the pressure applied by the polymer melts. The deformation of the insert changes the width of the flow path around the insert, which can cause several defects such as short shots or warpages of the parts. In order to reduce the deformation of the insert, it is important to achieve successful design of gating system, insert geometry, and molding conditions. In the present study, the insert deformations that occured during the injection molding of the BLDC motor stator were investigated by numerical analyses. The gate location and the insert shape were modified to reduce the insert deformation. Finally, the injection molding with the modified designs was carried out, and it was confirmed that the insert deformation was reduced.

• Resources Recycling
• /
• v.14 no.2
• /
• pp.28-32
• /
• 2005

By using thermal decomposition method, the preliminary experiments for recovery of metallic Ga from GaAs scraps produced in the manufacturing of compound semiconductors were carried out in laboratory(200 g/batch) scales. From these results, decomposition appratus with packed tower was constructed in commercial scale(30 kg/batch). The decomposition rate of GaAs increased with raising decomposition temperature, but the yield of Ga decreased over 1000$^{\circ}C. As a result, the optimum decomposition temperature was 1000~1050$^{\circ}C when the pressure of decomposition reactor was 2~2.5${\times}10^{-2} mmHg, and the yield of Ga was about 89 wt.%. The commercial decomposition apparatus was designed with packed tower because the partial pressure of As in vapor state was not reduced even if the temperature of As vapor was decreased. The recovery yield of Ga from GaAs scraps in large scale experiment showed 99%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.258-258
• /
• 2007

KNN계 세라믹스는 $400^{\circ}C$ 이상의 높은 큐리온도와 압전특성을 가져 Pb대체용 소재로 각광을 받고 있고 많은 연구들이 진행중이다. 하지만 potassium의 수분과의 반응성이 강하고 녹는점이 낮아 소결시 K2O의 휘발로 인해 화학양론적인 정확도를 맞추기가 어려운 단점을 가지고 있다. 이러한 단점을 보완하기 위하여 Hot pressing, Hot forging, SPS등 여러 가지 방법을 이용한 연구가 보고되었다. 본 연구에서는 낮은 소결밀도를 향상시키기 위하여 성형압과 성형방법을 달리하여 성형밀도에 따른 소결 밀도와 압전 특성 변화에 대하여 관찰하였다. 넓은 범위의 성형밀도를 얻기 위하여 낮은 성형압을 가할 수 있는 기계적으로 작동하는 press와 높은 성형밀도를 가할 수 있는 유압식 press를 사용하였고, 양산성을 고려하여 일반적인 세라믹 제조공정을 이용하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.53-53
• /
• 2007

반도체 소자의 고집적화, 미세화 화로 인해 반도체의 동작속도를 증가시키기 위하여 Cu를 이용한 금속배선이 주목받게 되었으나, 높은 압력으로 인한 보은 Cu 영역에서 과잉 디슁 현상과 에로젼을 유도하고 반도체 웨이퍼위의 low-k 물질에 손상을 줌에 따라 메탈라인 브리징과 단락을 초래할 있어, Cu의 단락인 islands를 남김으로서 표면 결항을 제거하지 못한다는 단점을 가지고 있었다. 그래서 이러한 문제점을 해결하기 위하여 기존의 CMP에 전기화학을 결합시킴으로서 낮은 하력에서의 Cu평탄화를 달성할 수 있는 ECMP (electrochemical mechanical polishing)기술이 필요하게 되었다. 따라서 본 논문에서는 전기화학적 기계적 연마(ECMP)작용을 위해, I-V 특성 곡선을 이용하여 패시베이션 막의 active, passive, transient, trans-passive영역의 전기화학적 특성을 비교 분석하였으며, Cu막의 표면 형상을 알아보기 위해 scanning electron microscopy (SEM) 측정과 energy dispersive spectroscopy (EDS)와 X-ray Diffraction (XRD) 분석을 통해 금속 화학적 조성을 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.335-335
• /
• 2007

본 연구에서는 RF Magnetron Sputtering 법으로 94:6 wt%의 비율로 Sb가 첨가된 $SnO_2$ 타겟을 사용하여 실온에서 ATO(Antimony doped Tin Oxide) 박막을 증착하고, 열처리가 ATO 박막의 구조적, 전기적, 광학적 특성에 미치는 효과를 연구하고자 하였다. ATO 박막의 두께는 약 200 nm로 증착하였으며, 실험 조건으로는 Ar 유량을 100 seem, 진공도는 1, 5, 10 mTorr로 변화시켰으며 스퍼터링 파워는 100, 150, 200, 250 W로 조절하였다. 증착되어진 박막은 vacuum 상태에서 300, $600^{\circ}C$의 온도에서 열처리를 수행하였으며 결과적으로 스퍼터링 파워가 증가함에 따라 비저항이 감소하였고, 250 W의 파워와 10 mTorr의 공정압력 조건에서 $600^{\circ}C$로 열처리한 ATO 박막은 $5{\times}10^{-3}{\Omega}-cm$의 저항률과 85.3%의 높은 투과도를 가지는 우수한 투명 전도막을 얻을 수 있었다.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.1-6
• /
• 2008

For the safety design and operation of many gas process, it is necessary to know certain explosion limit, flash point, autoignition temperature (AIT) and minimum oxygen concentration of handling substances. Also it is necessary to know explosion limit at high temperature and pressure. In this study for the safe handling of hydrogen, explosion limit and AIT of combustion properties for hydrogen were investigated. By using the literatures data, the lower and upper explosion limits of hydrogen recommended 4.0 vol% and 77.0 vol%. Also the AIT of hydrogen with ignition sources recommended $400^{\circ}C$ at the electrically heated crucible furnace (the whole surface heating) and recommended $640^{\circ}C$ at the local hot surface. The new equations for predicting the temperature and the pressure dependence of the explosion limits of hydrogen are proposed. The values calculated by the proposed equations were a good agreement with the literature data.