• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.330-336
• /
• 2007

A single pixel photon counting type image sensor which is applicable for medical diagnosis with digitally obtained image and industrial purpose has tern designed with $0.18{\mu}m$ triple-well CMOS process. The designed single pixel for readout chip is able to be operated by single supply voltage to simplify digital X-ray image sensor module and a preamplifier which is consist of folded cascode CMOS operational amplifier has been designed to enlarge signal voltage(${\Delta}Vs$), the output voltage of preamplifier. And an externally tunable threshold voltage generator circuit which generates threshold voltage in the readout chip has been newly proposed against the conventional external threshold voltage supply. In addition, A dark current compensation circuit for reducing dark current noise from photo diode is proposed and 15bit LFSR(Linear Feedback Shift Resister) Counter which is able to have high counting frequency and small layout area is designed.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.379-384
• /
• 2021

A microneedle is a tool that used for drug delivery and diagnosis. Unlike general injections, the microneedle is short in length, enabling effective drug delivery while minimizing pain and risk of infection. Conventionally, microneedles have been manufactured precisely at a nanometer level based on microelectro mechanical systems (MEMS) technology, requiring expensive equipments & maintenance and complicated processes. To address the issues, 3D printing research has been conducted to fabricate microneedles simply, economically, and rapidly. Since 3D printing facilitates to manufacture prototypes and apply feedbacks, it is advantageous for the development and commercialization of microneedle for pharmaceuticals and cosmetics. Therefore, this review will introduce stereolithography (SLA), two-photon polymerization (2PP), dynamic light processing (DLP), continuous liquid interface production (CLIP), and fused deposition modeling (FDM) 3D printing technologies and also highlight research trends for microneedle production using them. Furthermore, the limitation of the current microneedle technology and the direction to be solved in the future will be discussed.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.478-486
• /
• 2022

Purpose: Although the working environment is measured at the construction site, only a few noise and vibration that are typically exposed for each process are performed without measuring the working environment by segmenting the exposed harmful factors. Therefore, it is intended to find the harmfulness of silicon oxide dust, which is most exposed at construction sites, and the complementary points of improvement measures currently being implemented at construction sites. Method: The status was analyzed using the actual condition survey report issued by the Korea Occupational Health Corporation and the Korea Occupational Health Association and data from the work environment measurement institution, and compared and analyzed with the rules on work environment measurement of the Occupational Safety and Health Act. Result: The harmfulness of silicon oxide dust was identified and improvement measures were derived. Conclusion: It is expected that occupational diseases against silicon dust can be reduced if the harmfulness of silicon oxide dust at construction sites is derived and improvement measures are actively applied at the site.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.5
• /
• pp.55-67
• /
• 2022

Sensor data can provide fault diagnosis for equipment. However, the cause analysis for fault results of equipment is not often provided. In this study, we propose an explainable convolutional neural network framework for the sensor-based time series classification model. We used sensor-based time series dataset, acquired from vehicles equipped with sensors, and the Wafer dataset, acquired from manufacturing process. Moreover, we used Cycle Signal dataset, acquired from real world mechanical equipment, and for Data augmentation methods, scaling and jittering were used to train our deep learning models. In addition, our proposed classification models are convolutional neural network based models, FCN, 1D-CNN, and ResNet, to compare evaluations for each model. Our experimental results show that the ResNet provides promising results in the context of time series classification with accuracy and F1 Score reaching 95%, improved by 3% compared to the previous study. Furthermore, we propose XAI methods, Class Activation Map and Layer Visualization, to interpret the experiment result. XAI methods can visualize the time series interval that shows important factors for sensor data classification.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.58-66
• /
• 2023

The latest global issues are the Space economy and low-orbit Space communication. 3GPP announced Release 17 standardization in June 2022, and in this regard, the United States prepared a strategy to enhance the competitiveness of the low-orbit 5G-NTN Space industry, and create an ecosystem at the national level in March 2023. Global smartphone semiconductor manufacturers have announced the development and verification results of standard-based chip technology, and satellite communication operators are launching low-orbit 5G-NTN Space communication services and rate products through convergence between terrestrial communication networks. This study diagnoses the current status of Korea's low-orbit 5G-NTN space communication ecosystem. We present our ecosystem creation strategy in terms of fair competition in the market, the service legal system, and the national R&D governance system.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.155-161
• /
• 2023

Ion concentration polarization (ICP) is one of the essential important mechanisms for biomolecule preconcentration devices as well as a fundamental transport phenomenon found in electrodialysis, electrochemical cell, etc. The ICP triggered by externally applied voltage enables the biomolecular analyte to be preconcentrated at an arbitrary position by a locally amplified electric field inside the microchannel. Conventional preconcentration methodologies using the ICP have two limitations: uncertain equilibrium position and hydrodynamic instability of preconcentration plug. In this work, a new preconcentration method in the dead-end microchannel around cation exchange membrane was numerically studied to resolve the limitations. As a result, the numerical model showed that the analyte was concentrated at a shock front developed in a geometrically confined dead-end channel. Furthermore, the electrokinetic behaviors for preconcentration dynamics were analyzed by changing microchannel's applied voltage and volumetric charge concentration of microchannel as key parameters to describe the dynamics. This work would provide an effective means for a point-of-care platform that requires ultra-fast preconcentration method.

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.493-500
• /
• 2023

In this study, we developed an impedance sensor capable of controlling electrode polarization by coating iridium oxide (IrO_x) on the surface of the screen-printed carbon electrode. IrO_x was deposited on the surface of carbon electrodes according to the number of cycles (0~50 cycles) by cyclic voltammetry. Observation of scanning electron microscope images revealed that the size and number of IrO_x particles increased as the number of cycles increased. The changes in impedance responses as a function of the NaCl concentration of the as-obtained sensors were investigated using electrochemical impedance spectroscopy. The sensors manufactured in 50 cycles exhibited the best coefficient of determination and reproducibility, attributed to the well-controlled electrode polarization. We further demonstrated the usefulness of the IrO_x-based sensor as a diagnosis sensor for dry eye syndrome by comparing the results of the commercially available osmometer and our sensor using actual solution samples.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1482-1491
• /
• 2013

The purpose of this study was to investigate the safety accidents and physical fatigues of school foodservice employees. Out of 300 questionnaires distributed from December 1~20, 2011, 276 responded. After excluding 54 incomplete questionnaires, 222 (usage rate: 74%) were examined in the final analysis. First, our results showed that in terms of safety accidents, most received bruises (92.8%), followed by burns (73.0%), cuts and lacerated wounds (69.4%), sprains (47.7%), falls (42.8%), fractures/dislocations (31.5%) and electric shock (2.7%). Second, we found that the average degree of physical fatigue of school foodservice employees was 3.65 based on the 5-point Likert scale. Specifically, pain in the arms and wrist was rated the highest, at 4.18. Third, results showed that the factors affecting physical fatigue were 'class of school' (P<0.05), 'frequency of meal serving per day' (P<0.05), 'no. of meals served per day' (P<0.001), 'no. of meals per employee' (P<0.05) and 'warm-up exercise before starting work' (P<0.05). This means that foodservice employees serving middle schools, serving meals three times per day, serving more than 1,000 meals per day, and serving more than 111 meals per employee perceive higher levels of physical fatigue. In addition, the physical fatigue of those who perform warm-up exercises before starting work was significantly lower than those who do not perform warm-up exercises before work (P<0.05). In conclusion, the frequently occurring major safety accidents of school foodservice employees were bruises and burns. An increase in workload also leads to the increasing physical fatigue of school foodservice employees. Thus, to lower the physical fatigue of school foodservice employees, school foodservice employees should be encouraged to perform warm-up exercises before staring work and new staffing guidelines for school foodservice employees should be developed.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.2
• /
• pp.260-267
• /
• 2000

Giant cell interstitial pneumonia. a synonym for hard metal pneumoconiosis, is a unique form of pulmonary fibrosis resulting from an exposure to hard metal dust. A case of biopsy-proved giant cell interstitial pneumonia in the absence of appropriate history of exposure to hard metal dust is reported. The patient presented with clinical features of chronic interstitial lung disease or idiopathic pulmonary fibrosis. He worked in a chemical laboratory at a fertilizer plant, where he had been exposed to various chemicals such as benzene and toluene. He denied having any other hobby in his house or job at work, which may have exposed him hard metal dust. High-resolution CT scan revealed multi-lobar distribution of ground glass opacity with peripheral and basal lung predominance. The retrieved fluid of bronchoalveolar lavage contained asbestos fiber and showed neutrotphil predominance. Surgical lung biopsy was performed for a definite diagnosis. Lung specimen showed alveolar infiltration of numerous multinucleated giant cells with mild interstitial fibrosis. Upon detailed examination of the lung tissue, one asbestos body was found. An analysis for mineral contents in lung tissue was performed. Compared with the control specimen, the amount of cobalt and several hard metal components in the lung tissue of this patient was ten times higher. We speculated that the inconsistency between occupational history and the findings of pathologic and mineralogical analyses could be explained by the difference in individual immunologic reactivity to hard metal dust despite the relatively small amount of unrecognized environmental exposure(ED: It's hard to understand what this phrase is trying to say).

• Publications of The Korean Astronomical Society
• /
• v.28 no.3
• /
• pp.55-63
• /
• 2013

Gyupyo (圭表, Gnomon) consists of Gyu (圭, Measuring Scale) and Pyo (表, Column), and was one of the traditional astronomical instruments in East Asia. Daegyupyo (Large Gnomon) was manufactured in the Joseon dynasty around 1434 ~ 1435. To increase the measurement accuracy, it was equipped with a Hoengyang (橫梁, Cross-bar) and used a Youngbu (影符, Shadow-Definer) which was invented during the Yuan dynasty (1271 ~ 1368). The cross-bar was installed on the top of the column and this structure was called Eol. In addition, three plumbs hanging from the cross-bar was employed to vertically built Eol on the measuring scale. This method was also used to not only check the vertical of Eol but also diagnose the horizontal of the cross-bar. Throughout this study, we found that a cross-bar in a gnomon has played three important roles; measurement of the shadow length made by the central part of the Sun, increase of the measurement precision using the shadow-definer, and diagnosis of the vertical of Eol and the horizontal of the cross-bar itself using the three plumbs. Hence, it can be evaluated that the employment of a cross-bar and a shadow-definer in a gnomon was a high technology in the contemporary times. In conclusion, we think that this study is helpful for understanding the Large Gnomon of the Joseon dynasty.