• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.7
• /
• pp.694-699
• /
• 2008

Considering the severe regulation associated with sludge treatment such as direct landfill and ocean dumping, there is no doubt in that an advanced study for the proper treatment of sludge is urgently needed in near feature. As one of viable method for sludge treatment, fry-drying of sludge by waste oil has been investigated in this study. The fundamental mechanism of this drying method lies in the phenomenon of rapid moisture escape in the sludge pore toward oil media. This is caused by the severe pressure gradient formed by the rapid oil heating between sludge and oil. As part of research effort of fry-drying using waste oil, a series of basic study has been made experimentally to obtain typical drying curves as function of important parameters such as drying temperature, drying time, oil type and geometrical shape of sludge formed. Based on this study, a number of useful conclusion can be drawn as following. The fry-drying method by oil immersion was found quite effective in the removal efficiency of sludge moisture, in general, the moisture content decreases significantly after 10 minutes and the whole moisture content was less than 5% after 14 minutes regardless of the drying temperature. The increase of oil temperature up to 140$^{\circ}C$ favors significantly for the removal of moisture but there was no visible difference above 140$^{\circ}C$. As expected, the decrease of diameter in sludge was efficient in drying due to the increased surface area per unit volume. Further, the effect of oil property by the change of oil type was noted. To be specific, for the case of engine oil the efficiency was found to be remarkably delayed in moisture evaporation compared with that of vegetable oil due to the increased viscosity of engine oil. It produced a result of increasing the evaporation of moisture largely relatively high in the drying temperature over 140$^{\circ}C$ compared with the drying temperature 120$^{\circ}C$ drying temperature as the drying time passed. Accordingly, the drying temperature is considered desirable as keeping over 140$^{\circ}C$ regardless of a sort of used oil.

• Elastomers and Composites
• /
• v.10 no.2
• /
• pp.136-156
• /
• 1975

고무는 불량열전도체(不良熱傳導體)이며 두께가 두꺼우면 내부(內部)가 적정온도수준(適正溫度水準)에 이르기 전까지 가황시간(加黃時間)이 길어진다. 가황온도(加黃溫度)가 상승(上昇)할수록 가황물(加黃物)의 물성(物性)은 열화(劣化)되는 경향(傾向이) 있다. 천연(天然)고무든지 합성(合成)고무든지 간(間)에 과가황(過加黃)에 대(對)한 저항성(抵抗性)이 나쁘므로 특(特)히 고온가황(高溫加黃)에 대(對)해 민감(敏感)하다. 이것은 고온(高溫)에서 단시간(短時間) 가황(加黃)일수록 가속(加速)된다. 평탄가황배합물(平坦加黃配合物)의 경우에서 보더라도 내부(內部)가 적절(適切)히 가황(加黃)되기도 전(前)에 외부(外部)는 과가황(過加黃)이 되는 수가 있다. 근래(近來) 발간(發刊)된 문헌(文獻)에서도 이러한 내용(內容)이 잘 설명(說明)이 되어 있는데 다른 각도(角度)에서 고찰(考察)해 볼것 같으면 정체시간(停滯時間)이 비교적(比較的) 길지 않는 한(限) 가황시간(加黃時間)은 정체시간(停滯時間)과 sheet 가황시간(加黃時間)과의 합(合)이라고 말할 수 있겠다. 예(例)를 들어 설명(說明)하자면 $130^{\circ}C(266^{\circ}F)$에서 정체시간(停滯時間)이 10분(分)이고 sheet 가황시간(加黃時間)이 20분(分)인 제품(製品)은 이 온도(溫度)에서 30분간(分間) 가황(加黃)해야 된다는 것이다. 온도계수(溫度係數)를 2라고 가정(假定)할 경우 $140^{\circ}C(284^{\circ}F)$에서의 가황시간(加黃時間)은 $30\times\frac{1}{2}=15$분(分)이 아니라 $20\times\frac{1}{2}+10=20$분(分)이 된다. 크기가 큰 제품(製品)은 보통(普通) 다음에 있는 여러 방법(方法)들 가운데 한 가지 또는 여러가지를 조합(組合)하여 가황(加黃)시킨다. a) 크기가 작은 것에 대한 것 보다 낮은 온도(溫度)에서 가황(加黃)한다. b) 침투가황-제품(浸透加黃-製品)을 가압하(加壓下)에 두고서 외부가황(外部加黃)은 단속(斷續)시키고 열(熱)이 중심(中心)으로 침투(浸透)하게 한다. c) 단계가황(段階加黃)-처음에는 저온(低溫)에서 시작(始作)하여 일정간격(一定間隔)을 두고 점차(漸次) 온도(溫度)를 상승(上昇)시켜 최종적(最終的)으로 가황온도(加黃溫度)까지 올린다. d) 가능(可能)하다면 metal base나 금형(金型)에서 고무를 증기가황(蒸氣加黃)시킬 경우에 있어서 속이 빈 축(軸)을 사용하여 내부(內部)로 부터 가열(加熱)하면 가황시간(加黃時間)이 단축(短縮)된다. e) 냉각중(冷却中)의 후가황(後加黃)-이것은 가열장치(加熱裝置)에서 끄집어낸 후 제품(製品)의 외부(外部)를 냉각(冷却)시키는 방법(方法)이다. 가열(加熱)된 제품(製品)이 쌓여 있거나 적절(適切)하게 냉각(冷却)되지 않을 때 가황(加黃)이 추가적(追加的)으로 되거나 과가황(過加黃)이 될 우려가 있는 제조공정(製造工程)에서는 흔히들 이 방법(方法)을 무시(無視)하고 있다. 여기서 강조(强調)해 두어야 할 것은 항상 제품(製品)의 외부(外部)를 완전(完全)히 가황(加黃)시킬 필요(必要)는 없다는 것이다. 다공성(多孔性)이나 기포생성(氣泡生成)을 조장(助長)하는 불량가황상태(不良加黃狀態)와 표면(表面)에서의 과가황상태간(過加黃狀態間)의 균형(均衡)을 취(取)해 줘야 하는데 물론(勿論) 이때는 가황시간(加黃時間)을 단축(短縮)시켜야 한다는 경제적(經濟的)인 측면(側面)도 아울러 고려(考慮)해야 한다. 이것은 고무기술자(技術者)가 당면(當面)해야할 과제(課題)에 속(屬)하며 바람직 한것은 본장(本章)의 내용(內容)이 여러 상황하(狀況下)에서 당면(當面)한 문제(問題)에 대(對)해 어떻게 대처(對處)해 야 할지를 모르는 여러 기술자(技術者)들에게 도움이 되었으면 하는 것이다.

• Korean Security Journal
• /
• no.44
• /
• pp.7-35
• /
• 2015

The objective of this article is to inform and document the contemporary development of the private security industry in Queensland Australia, a premier holiday destination that provide entertainment for the larger region. The purpose of this review is to examine the comtemporary development of mandated licensing regimes regulating the industry, and the necessary reform agenda. The overall aim is threefold: first, to chart the main outcomes of the two-wave of reforms since the mid-'90s; second, to examine the effectiveness of changes in modes of regulation; and third, to identify the criteria that can be considered a best practice based on Button(2012) and Prenzler and Sarre's(2014) criteria. The survey of the Queensland regulatory regime has demonstrated that, despite the federal-guided reforms, there remain key areas where further initiatives remain pending, markedly case-by-case utilisation of more proactive strategies such as on-site alcohol/drug testing, psychological evaluations, and checks on close associates; lack of binding training arrangement for technical services providers; and targeted auditing of licensed premises and the vicinity of venues by the Office of Fair Trading, a licensing authority. The study has highlighted the need for more determined responses and active engagements in these priority areas. This study of the development of the licensing regimes in Queensland Australia provides useful insights for other jurisdictions including South Korea on how to better manage licensing system, including the measures required to assure an adequate level of professional competence in the industry. It should be noted that implementing a consistency in delivery mode and assessment in training was the strategic imperative for the Australian authority to intervene in the industry as part of stimulating police-private partnerships. Of particular note, competency elements have conventionally been given a low priority in South Korea, as exemplified through the lack of government-sponsored certificate; this is an area South Korean policymakers must assume an active role in implementing accredited scheme, via consulting transnational templates, including Australian qualifications framework.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.2
• /
• pp.121-128
• /
• 1999

This experiment was carried out to establish effective weed control system in the cultivation of Coix lachryma-jobi L. The effect of annual weeds artificially transplanted on the growth of Coix lachryma-jobi L. were that the higher the density of weeds, the lower the yield considerably by reducing number of grains and tillers per plant. Among four weeds of Echinochloa crusgalli galli P. BEAUV., Digitaria sanguinalis $S_{COPOL}$., Chenopodium album L., and Portulaca oleracea L., weed of Portulaca oleracea L. reduced adlay yield most by 182.6kg/10a and it was judged to be the most injurious weed to adlay production. Among four weed control systems, which are one herbicide treatment, one herbicide treatment + one cultivating work with cultivator, two times cultivating work with cultivator and two times hand-weeding, the control system of 'one herbicide treatment + one cultivating work with cultivator' showed the lowest amount of weed growth by 7.34 weeds per $m^2$ in comparison with control plot of 35.00 weeds per $m^2$. Among four weed control systems, the system of 'two times hand-weeding' had much more amount of light penetration in adlay canopy with 791.9 mol than any other systems.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.67-72
• /
• 2006

Injection of $CO_2$ into underground saline formations, due to their large storage capacity, is probably the most promising approach for the reduction of $CO_2$ emissions into the atmosphere. $CO_2$ storage must be carefully planned and monitored to ensure that the $CO_2$ is safely retained in the formation for periods of at least thousands of years. Seismic methods, particularly for offshore reservoirs, are the primary tool for monitoring the injection process and distribution of $CO_2$ in the reservoir over time provided that reservoir properties are favourable. Seismic methods are equally essential for the characterisation of a potential trap, determining the reservoir properties, and estimating its capacity. Hence, an assessment of the change in seismic response to $CO_2$ storage needs to be carried out at a very early stage. This must be revisited at later stages, to assess potential changes in seismic response arising from changes in fluid properties or mineral composition that may arise from chemical interactions between the host rock and the $CO_2$. Thus, carefully structured modelling of the seismic response changes caused by injection of $CO_2$ into a reservoir over time helps in the design of a long-term monitoring program. For that purpose we have developed a Graphical User Interface (GUI) driven rock physics simulator, designed to model both short and long-term 4D seismic responses to injected $CO_2$. The application incorporates $CO_2$ phase changes, local pressure and temperature changes. chemical reactions and mineral precipitation. By incorporating anisotropic Gassmann equations into the simulator, the seismic response of faults and fractures reactivated by $CO_2$ can also be predicted. We show field examples (potential $CO_2$ sequestration sites offshore and onshore) where we have tested our rock physics simulator. 4D seismic responses are modelled to help design the monitoring program.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.3
• /
• pp.331-337
• /
• 2015

Citrus and its peels, which are by-products from juice and/or jam processing, have long been used in Asian folk medicine. Citrus peels show an abundant variety of flavanones, and these flavanones have glycone and aglycone forms. Aglycones are more potent than glycones with a variety of physiological functions since aglycone absorption is more efficient than glycones. Bioconversion with cytolase converted narirutin and naringin into naringenin and hesperidin into hesperetin. Therefore, this study aimed to investigate the anti-oxidant and anti-inflammatory effects of bioconversion of Citrus unshiu (CU) peel extracts with cytolase (CU-C) in RAW264.7 cells. HPLC chromatograms showed that CU and CU-C had 23.42% and 29.39% total flavonoids, respectively. There was substantial bioconversion of narirutin to naringenin and of hesperidin to hesperetin. All citrus peel extracts showed DPPH scavenging activities in a dose-dependent manner, and CU-C was more potent than intact CU. RAW264.7 cells were pre-treated with $0{\sim}500{\mu}g/mL$ of citrus peel extracts for 4 h and then stimulated by $1{\mu}g/mL$ of lipopolysaccharide (LPS) for 8 h. All citrus peel extracts showed decreased mRNA levels and protein expression of LPS-induced inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) in a dose-dependent manner. Especially, CU-C markedly inhibited mRNA and protein expression of iNOS and COX-2 compared to intact citrus peel extracts. All citrus peel extracts showed decreased NO production by iNOS activity. This result suggests that bioconversion of citrus peel extracts with cytolase may provide potent functional food materials for prevention of chronic diseases attributable to oxidation and inflammation by boosting the anti-inflammatory effects of citrus peels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.1
• /
• pp.68-75
• /
• 2016

This study was conducted to provide information regarding changes in antioxidant activity in response to conching temperatures, conching times, and cacao mass content (CMC) in dark chocolate. The radical scavenging activities and functional components of cacao nibs were highest for raw cacao nib (R0) under all conditions. Moreover, antioxidant activities and functional compounds increased during roasting for 25 min. As the conching temperature increased, the radical scavenging activities and functional components increased. Quantitative analysis of major catechin-derived compounds by HPLC revealed that R0 had the highest value for other roasted cacao nibs in all aspects (P<0.05). The content of procyanidin B2, catechin, and epicatechin increased during roasting for 25 min. Finally, evaluation of couvertures revealed that procyanidin B1 content increased as conching time increased to 48 h, except for 70% CMC and conched at $60^{\circ}C$ (HH) and 70% CMC and conched at $50^{\circ}C$. Overall, HH48 contained the richest catechin-derived components.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.395-400
• /
• 2004

The effects of compositions of binders on the rheological properties of mixtures and the preparation conditions on the formation of defects and the debinding characteristics of compacts for the injection molding of ceramic powders (65 wt% aluminaㆍ35 wt% feldspar) were studied. Ceramic powders were coated with 2 wt% of stearic acid and then mixed with 15, 20, and 25 wt% of Paraffin Wax (PW) and High Density Polyethylene (HDPE) as binders at $160^{\circ}C$ for 2 h. Rheological properties were investigated by using capillary rheometer. Apparent viscosities of mixtures were 80∼300 Paㆍs at 1,000$s^{-1}$ of a shear rate, it was good for the injection molding and depending on the compositions of binders. Short shot was formed at 15H5P5 (the ratio of HDPE : PW=5 : 5 in 15 wt% of binders) compacts without injection pressures and any noticeable defects were not formed at 45 kgf/$cm^{2}$ in 20H5P5 compacts. PW and HDPE were removed by the solvent extraction and thermal debinding method. Thermal debinding of HDPE at $450^{\circ}C$ for 5 h, which followed the extraction of PW was using n-heptane solvent at $70^{\circ}C$ for 5 h. Continuous pores in compacts, which facilitate the removal of HDPE by the thermal debinding, were found to form in the compacts when PW was removed by the solvent extraction. The optimum composition of binder at which binder was removed by thermal debinding without defects while maintaining the compact strength was 20H5P5. Bulk density, porosity and 3-point bending strength of 20H5P5 compact sintered at 1,30$0^{\circ}C$ for 5 h were 2.8, < 3%, and 2,400 kgf/$cm^{2}$, respectively, and can be used as a structural materials.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.206-211
• /
• 2003

Effects of substrates and buffer layer upon the formation of crystalline phases and ferroelectricity of $YMnO_3$ thin films were investigated. The hexagonal $YMnO_3$ was easily formed on Si(100) while the mixed phases, hexagonal and orthorhombic $YMnO_3$, on $Pt(111)/TiO_2/SiO_2/Si$ substrate. When the $Y_2O_3$ buffer layer of 70 nm thick was inserted between the substrates and the $YMnO_3,$ the c-axis oriented hexagonal single phase formed on both substrates, Si(100) and $Pt(111)/TiO_2/SiO_2/Si$. The leakage current density of the hexagonal $YMnO_3$ thin films was lower than that consisting of mixed phases, hexagonal and orthorhombic. Furthermore the hexagonal $YMnO_3$ with c-axis preferred orientation showed the lowest leakage current density. The remnant polarization from a P-E hysteresis curve for the $YMnO_3$ formed on Si(100) was 0.14 without buffer layer and $0.24_{mu}C/cm^2$ for that with buffer layer. For the $Pt(111)/TiO_3/SiO_3/Si$ substrates, the specimen without $Y_2O_3$buffer layer did not show the hysteresis curve, while the buffer-layered has the remnant polarization of $1.14_{mu}C/cm^2$. It was concluded that the leakage current density and the ferroelectricity for the $YMnO_3$ thin films could be controlled by varying crystalline phases and their preferred orientation which depend on the kind of substrates and whether the $Y_2O_3$buffer layer exist or not.

• Journal of The Korean Association For Science Education
• /
• v.38 no.2
• /
• pp.203-217
• /
• 2018

The research objective of this study is to analyze the aspects of small group decision-making process based on reading news reports in the context of the socio-scientific issues (SSI) activity related to climate change. Twenty-two high school students from Gyeonggi Province, South Korea, were asked to read two news reports on the UN climate change conferences and take a stance on joining the Paris Agreement both as an individual and as a small group. The news reports were analyzed in terms of genre, discourse, and style adapting the critical discourse analysis (CDA) and the decision-making processes of the small groups were examined on recognizing a problem and evaluating alternatives and decisions. The results from analyzing the news reports denoted that the Paris agreement is not only related to finding ideal solutions to climate change, but rather, connected to political or economic interests and power relationship. In the stage of recognizing a problem, meanwhile, different frames which students recognize the Paris agreement and discourses in the foreground of the news reports were the critical causes in terms of identifying the problem. In the stage of evaluating alternatives and decisions, the equity and fairness were the criteria for the small group discussions. This study implies the necessity of the scientific literacy instruction to develop the ability to critical reading in the context of the SSI.