• Journal of KIISE
• /
• v.44 no.5
• /
• pp.469-475
• /
• 2017

The emerging NVMe-based multi-queue SSDs provides a high bandwidth by parallel I/O, i.e., each core performs I/O through its dedicated queue in parallel with other cores. To provide a bandwidth share for each application with I/O, a fair-share scheduler that provides a bandwidth share to each core is required. In this study, we proposed a multi-core scalable fair-queuing algorithm for multi-queue SSDs. The algorithm adopts randomization to minimize the inter-core synchronization overheads and provides a weight-proportional bandwidth share to each core. The results of our experiments indicated that the proposed algorithm gives accurate bandwidth partitioning and outperforms the existing FlashFQ scheduler, regardless of the number of cores for a Linux kernel with block-mq.

• Composites Research
• /
• v.30 no.2
• /
• pp.108-115
• /
• 2017

Among several fabrication processes of $SiC_f/SiC$ composites, the chemical vapor infiltration (CVI) process has attractive advantages in manufacturing complex net-or near-net-shape components at relatively low temperatures, easily controlling the microstructure of the matrix and obtaining the highest SiC purity level. However, it has disadvantages in that the ratio of residual pores in matrix is higher than other processes and processing time is relatively long. To reduce the residual porosity, the whisker-growing-assisted CVI process, which is composed of whisker growth and matrix filling steps has been developed. The whiskers grown before matrix filling may serve to divide the large natural pores between the fibers or bundles so that the matrix can be effectively filled into the finely divided pores. In this paper, the fundamentals of the CVI process for preparation of $SiC_f/SiC$ composites and some experimental results prepared by CVI and whisker-growing-assisted CVI processes are briefly introduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.643-651
• /
• 2008

In this paper, we analyze the performance of normalized SNR based proportional fair scheduling with partial feedback information for multiuser MIMO-OFDMA systems. The closed form expression on the downlink capacity of the selective partial CQI feedback scheme is derived and its asymptotic behavior is investigated. From the performance analysis and numerical results, it is found that the optimal growth rate of downlink capacity can be achieved with bounded average feedback overhead irrespective of the number of users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.5
• /
• pp.939-948
• /
• 1997

In this paper, we propose the new rate-based transmission rates control algorithm that allocates the fair band-width for ABR service in ATM network. In the traditional ABR service, bandwidth is allocated with constant rate increment or decrement, but in the proposed algorithm, it is allocated fairly to the connected calls by the fuzzy inference of the available bandwidth. The fuzzy inference uses buffer state and the buffer variant rate as the input variables, and uses the total transmission rate as a output variable. This inference a bandwidth is fairly distributed over all ABR calls in service. By simmulation, we showed that the proposed method improved 0.17% in link effectiveness when RIF, RDF is 1/4, 38.6% when RIF, RDF 1/16, and 82.4% when RIF, RDF 1/32 than that of the traditional EFPCA.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.145-155
• /
• 2005

In this study, a finite element method program code which can be accomodate boundary conditions on the complex surfaces has been developed to simulate polymer extruder processes. The analysis method includes the fractional 4-step method for efficient computation time and compact usage of memory storage to solve the velocities and the pressure values from the Navier-Stokes equation. By using the developed program which was verified with simple Poiseuille flow mixture phenomena in single-and twin-screw extruder are analyzed. It is concluded that the proposed method resulte Poiseuille Poiseuille d in fair agreement with the exact solution of simple flow and the back flow near the entrance happens in single-screw model. It is identified that the location and values of maximum pressure in the twin screw extruder model. It is expected that the Velocity field found can be used to predict the degree of mixture in the extruder barrel.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.62-62
• /
• 2011

현재 다운방한 용도에 사용되는 직물 트랜드는 경량화 및 박지화 추세에 있으며, 국내외 유명 브랜드에서 사용되는 스포츠웨어 직물소재의 대부분이 이러한 제품으로 판매가 이루어지고 있다. 현재, 국내외 다운방한용에 사용되는 원단은 겉감이외에 다운 세기방지용 안감직물을 사용하여 다운이 빠져나오지 않도록 하고 있음. 그러나, 최근 겉감으로 사용하여 다운이 세지 않고 매우 가벼우면서 Packable 원단개발이 요구되고 있을 뿐만 아니라, 다운방한직물에 요구되는 성능에 만족하거나 성능이 향상된 고기능 원단개발이 요구되고 있다. 이러한 다운방한용 직물은 다운의 내구성 및 지속성 측면에서 매우 많은 기능이 요구되고 있으며 현재 국내에서 사용하고 있는 다운방한용 직물은 다운커버직물을 사용하거나 코팅에 의해 다운세기 방지기능을 강제로 발현시키고 있다. 그러나 그 직물은 경량화 되어가고 있기 때문에 다운커버 직물을 사용하지 않으면서부터 다운이 세는 문제점, 그리고 공기투과 및 투습이 제대로 되지 못하는 기능성의 문제점, 경량화와 더불어 인열강력이 약하여 잘 찢어지는 문제점, 인열강력의 물리적 특성을 높이고자 코팅을 하게되면 기능성 및 감성이 더욱 나빠지는 문제점이 나타나게 되어 다운 방한용 직물은 큰 문제점이 되고 있다. 이에 겉감만으로도 다운방한용도에 적합한 고감성 및 기능성을 가진 경량직물 개발을 위해 고밀도 제직 및 설계 기술, 최종 염색가공 및 후가공 공정까지의 공정내(內) 간(間)연계기술을 연구하였다.

• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.1
• /
• pp.29-38
• /
• 2024

Wastewater management is increasingly emphasizing economic and environmental sustainability. Traditional methods in sewage treatment plants have significant implications for the environment and the economy due to power and chemical consumption, and sludge generation. To address these challenges, a study was conducted to develop the Intermittent Cycle Extended Aeration System (ICEAS). This approach was implemented as the primary technique in a full-scale wastewater treatment facility, utilizing key operational factors within the standard Sequencing Batch Reactor (SBR) process. The optimal operational approach, identified in this study, was put into practice at the research facility from January 2020 to December 2022. By implementing management strategies within the biological reactor, it was shown that maintaining and reducing chemical quantities, sludge generation, power consumption, and related costs could yield economic benefits. Moreover, adapting operations to influent characteristics and seasonal conditions allowed for efficient blower operation, reducing unnecessary electricity consumption and ensuring proper dissolved oxygen levels. Despite annual increases in influent flow rate and concentration, this study demonstrated the ability to maintain and reduce sludge production, electricity consumption, and chemical usage. Additionally, systematic responses to emergencies and abnormal situations significantly contributed to economic, technical, and environmental benefits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2624-2630
• /
• 2013

In LED chip packaging, die bonding is a very important process which fixes the LED chip on the lead flame to provide enough strength for the next process. During the process, inspection processes are very important to detect exact locations of dispensed epoxy dots and to determine bonding status of dies whether they are lies at exact positions with sufficient bonding strength. In this study, a useful machine vision based inspection system is proposed for the LED die bonder. In the proposed system, 2 cameras are used for epoxy dot position detection and 2 cameras are sued for die attaching status determination. New vision processing algorithm is proposed, and its efficiency is verified through required field experiments. Measured position error is less than $X:-29{\mu}m$, $Y:-32{\mu}m$ and rotation error:$3^{\circ}$ using proposed vision algorithm. It is concluded that the proposed machine vision based inspection system can be successfully implemented on the developed die bonding system.

• Journal of Digital Convergence
• /
• v.14 no.1
• /
• pp.203-209
• /
• 2016

In this paper, we introduce a fuzzy inference systems for nonlinear inference using fuzzy cluster. Typically, the generation of fuzzy rules for nonlinear inference causes the problem that the number of fuzzy rules increases exponentially if the input vectors increase. To handle this problem, the fuzzy rules of fuzzy model are designed by dividing the input vector space in the scatter form using fuzzy clustering algorithm which expresses fuzzy cluster. From this method, complex nonlinear process can be modeled. The premise part of the fuzzy rules is determined by means of FCM clustering algorithm with fuzzy clusters. The consequence part of the fuzzy rules have four kinds of polynomial functions and the coefficient parameters of each rule are estimated by using the standard least-squares method. And we use the data widely used in nonlinear process for the performance and the nonlinear characteristics of the nonlinear process. Experimental results show that the non-linear inference is possible.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1649-1650
• /
• 2006

반도체 소자의 선폭이 나노미터 스케일로 진입함에 따라 소자의 물리적 특성을 나노미터 스케일에서 정밀하게 측정하고자 하는 요구가 증대되고 있다. Atomic Force Microscopy (AFM)은 나노미터 이하의 해상도를 가지고 물질 표면의 기하하적, 전기적 특성 등을 측정할 수 있으므로 나노소자 연구에 필수적인 도구가 되었다. 그러나 AFM은 낮은 측정속도와 탐침의 기하학적 형상에 의한 AFM 영상의 왜곡 등과 같은 치명적인 단점도 가지고 있다. AFM의 낮은 측정 속도를 개선하기 위해서 진보된 마이크로머시닝기술을 이용하여 캔틸레버의 크기를 줄이거나 캔틸레버 위에 박막 구동기를 집적시키는 등의 노력이 진행되고 있으나, 이 경우 전통적인 식각 공정을 이용하여 캔틸레버 위에 tip을 형성하는 것이 매우 어렵다. 본 연구에서는 이미 제작된 캔틸레버 위에 전자빔 조사법을 이용하여 탄소상 tip을 직접 성장시킴으로써 전통적인 식각 공정에 비해 매우 간단하고 값싸며, 활용도가 높은 공정을 개발하였다. 탄소상 tip 성장에 필요한 탄소 소스는 dipping 방법을 이용하여 공급하였고, 시분할법을 사용하여 캔틸레버의 원하는 위치에 tip을 성장시킬 수 있었다. 이렇게 제작된 tip은 최대 $5{\mu}m$ 높이까지 가능했으며, 종횡비는 10:1 이상이어서 tip의 형상에 의한 AFM 영상 왜곡 현상을 최소화할 수 있을 것으로 기대된다.