• Journal of the Korean GEO-environmental Society
• /
• v.5 no.4
• /
• pp.25-31
• /
• 2004

In conventional activated sludge process, COD fractions in wastewater are important parameters, significantly. Depending on characteristics of influent COD fractionation, activated sludge process requires a major change of a process operation to ensure meeting a stricter standards. In order to validate and evaluate the accuracy of the traditional COD fractionation methodologies, readily and slowly biodegradable COD was mixed using glucose and peptone as a sole carbon source in a synthetic wastewater, respectively. In this research, prediction of the COD fraction was made using the OUR(Oxygen Utilization Rate) and the NUR(Nitrate Utilization Rate) experiments. The result showed that COD fractions calculated by OUR experiment were similar to the composition of synthetic wastewater. On the other hand, it was found that an error was generated during the NUR experiment. This error was due to the intracellular storage period for storage microorganisms such as PAOs, and the error in COD fraction was observed about 8-14 % in terms of Total COD.

• Composites Research
• /
• v.34 no.2
• /
• pp.88-95
• /
• 2021

VARTM (Vacuum-assisted resin transfer molding) process is a low-cost process technology and affiliated with OoA (Out of Autoclave). Besides, it has been widely used in various fields. However, because of its lower quality than the autoclave process, it isn't easy to apply the VARTM process to the aerospace industry, which requires high reliability. The main problem of the VARTM process is the loss of mechanical properties due to the low fiber volume fraction and high void content in comparison to the autoclave. Therefore, many researchers have studied to reduce void and increase fiber volume fraction. This study examines whether the method of controlling atmospheric pressure could increase the fiber volume fraction and reduce void during the resin impregnation process. Reliability evaluation was confirmed by compressive strength test, fiber volume fraction analysis, and optical microscopy. As a result, it was confirmed that increasing the atmospheric pressure step by step in the VARTM process of impregnating the preform with resin effectively increases the fiber volume fraction and reduces void.

• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.587-594
• /
• 2005

분무성형공정은 급냉응고 및 결정입자 제어에 따른 고품위 소재 개발의 장점과 함께 고밀도 near-net-shape 제품의 제조가 가능한 합금제조기술이다 분무성형체의 미세조직은 적층표면에 도달하는 액적들의 평균 열용량, 즉 고상분율에 의하여 결정되며, 이는 액적의 비행과정에서의 분사가스-액적간의 열전달과 적층표면에서의 열유입과 열유출 속도에 영향을 받는다. 실제 다양한 공정변수들이 복합적으로 미세조직 형성과정에 영향을 미치지만, 균일한 미세조직을 얻기 위하여서는 적층표면에서의 온도와 고상분율을 항상 일정하게 제어하여야만 한다 즉, 적층표면 온도를 분무 성형공정중에 지속적으로 측정하여 이를 공정 제어 시스템에 feedback하여 원하는 적층표면온도를 유지하도록 공정변수를 제어하는 것이 필수적이다. 분무성형에 제조된 성형체는 합금원소의 편석이 없고 미세한 등방성의 결정립으로 이루어진 특징적인 미세조직을 나타낸다 이와 같은 미세조직으로 인하여 분무성형체는 우수한 성형성과 기계가공성을 나타내며, 또한 분무성형-후속가공된 최종 제품은 잉곳주조에 의하여 제조된 것과 비교하여 크게 향상된 기계적 성질을 가진다.

• Korean Journal of Materials Research
• /
• v.5 no.5
• /
• pp.611-619
• /
• 1995

PAN계 탄소섬유와 페놀수지를 이용하여 rod를 인발성형 한 후, 다른 섬유분율을 갖는 두종류의 hexagonal type 4D 프리폼을 제작하였다. 석탄계 핏치를 가압함침 탄화공정을 통하여 함침한 후 탄화와 고온열처리를 하였다. 이와 같은 공정을 반복하여 고밀도화된 4D CRFC를 제조하였다. 열충결 시험 후 새로운 크랙이 생성되었을 뿐만 아니라 기존의 크랙이 확장되었으며 이와 같은 크랙들은 공기와의 접촉면을 제공하여 중량감소를 보였다. 공기 산화 저항성을 고온열처리 공정을 거친 것이 약 20% 우수하게 나타났다. 4D CFRC의 밀도와 섬유의 분율이 높을 수록 삭마 저항성이 커지고, 삭마량은 시간에 따라 선형적으로 증가하였으며 type II가 type I보다 삭마저항성이 우수하였다. 삭마 메카니즘을 관찰한 결과 1차적으 기질의탈리가 먼저 일어난 다음 섬유가 삭마되었다.

• Composites Research
• /
• v.18 no.4
• /
• pp.35-43
• /
• 2005

In resin transfer molding(RTM), race-track effects and non-uniform fiber volume fraction may cause undesirable resin flow patterns and thus result in dry spots, which affect the mechanical properties of the finished parts. In this study, a real time RTM control strategy to reduce these unfavorable effects is proposed. This control rule is accomplished by means of the permeability mapping and pressure regulation. Through numerical simulations, the validity of the proposed scheme is demonstrated.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.529-537
• /
• 2000

The effects of the gel content on the cell structures of PP sheets by using an electron-curing system were investigated. Three extruded PP sheets crosslinked by three different doses were used for the batch foaming process with the supercritical state $CO_2$. Experiments were also performed in order to study the effects of the gel content, saturation pressure and temperature on cell structures. Then foaming conditions, such as temperature and duration of time, were changed. The amount of gas absorbed into PP samples was not affected by gel contents and the operating condition of saturation pressure, which was higher than 2000 psi. The foam cells of PP with a low gel content grew irregularly at a higher foaming temperature and for a longer duration of foaming time. However, PP samples with high gel content showed even cell structures and narrow tell size distributions under the severe conditions of high foaming temperatures and long duration of foaming time.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.649-654
• /
• 2009

Respirometric analysis of domestic sewage by measuring oxygen uptake rate(OUR) was carried out for the experimental assessment of the organic and biomass fractions. The data of the organic and biomass fractions in sewage is essential for the activated sludge model to optimize the biological treatment plant. As a result of this study, the fractions of readily biodegradable substrate($S_S$), slowly biodegradable substrate($X_S$), inert soluble substrate($S_I$), inert particular substrate($X_I$) and heterotrophic biomass($X_{HAB}$) were about 26.6%, 41.5%, 8.5%, 14.7% and 8.7% on the basis of chemical oxygen demand($COD_{Cr}$), respectively. And the fractions of nitrogen were also studied. The fractions of soluble nitrate nitrogen($S_{NO}$), soluble ammonia nitrogen($S_{NH}$), soluble nonbiodegradable organic nitrogen($S_{NI}$), soluble biodegradable organic nitrogen($S_{ND}$) and slowly biodegradable organic nitrogen($X_{ND}$) were about 3.7%, 64.9%, 4.7%, 9.4% and 17.4%, respectively.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.508-515
• /
• 2002

The effects of the crosslinking caused by irradiation dose, molecular weights of the foaming materials, and various foaming processes on the foam structure of the polypropylene (PP) were investigated. The maximum gel content of the PP was 48% when the sheet was irradiated with 3.2 Mrad. This high gel content improved the cell structures by providing high thermal stability. The increase of both the gel content and structural development were stopped at the irradiation dose exceeding 3.2 Mrad. The increase of the molecular weights served to help produce a foam with particularly fine and even cell structures, along with improved thermal stability as well.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.79-81
• /
• 2001

저압 기상 영역에서 Anhydrous HF 가스와 Methanol vapor를 사용하는 산화막 식각공정을 수행하기 위하여 (1) 반응기 부피의 최소화, (B) 공정압력의 최소화, (3) 고순도 알루미나 Reactor 적용, (4) Cluster화의 개념을 적용한 VPC 장치를 제작하였다. Wafer의 온도, HF의 분압 및 Working Pressure 등의 공정변수에 따른 Oxide Wafer의 식각특성의 변화를 확인하였다. 또한 Etch Uniformity를 향상시키기 위하여 Shower Head 구조를 변경시켜서 실험하였으며, CFD Simulation을 이용하여 Reactor내에서의 HF gas 및 Methanol vapor의 분율을 예측하였다.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2003.05a
• /
• pp.24-24
• /
• 2003

고온초전도 BSCCO 2223 ((Bi, Pb)₂Sr₂Ca₂Cu₃O/sub x/) 선재의 특성을 향상시키기 위해서는 반복적인 인발 및 압연과정을 통한 texturing향상, BSCCO 2223입자의 배향성 증대, 피복재내 초전도체의 충진율(밀도)향상, 이차상의 부피분율 감소등이 이루어져야 한다. 최적 열처리 조건을 통하여 열처리 시에 형성되는 이차상인 (Bi,Pb)₂Sr₂CuO/sub y/ (2201, amorphous phase)를 조절하면서, (Ca,Sr)₂CuO₃ (2/1 AEC), (Ca,Sr)/sub 14/Cu/sub 24/O/sub 41/ (14/24 AEC)와 같은 이차상들의 부피분율 및 크기를 감소시켜야만 한다. 본 실험에서는 BSCCO 2223 선재의 특성을 향상시킬수 있는 최적의 열처리 조건 확립 및 기계적 공정시 나타나는 여러 가지 문제점을 개선하여 높은 임계전류를 가지는 선재의 특성을 분석하고자 하였다. 최종적으로 제조된 선재는 2223상 결정이 피복재(Ag)와 평행하게 길게 성장하며, AEC상의 크기와 부피분율이 감소할수록 더 높은 임계전류특성을 나타내었다(I/sub c/～70A, J/sub c/～42,000 A/㎠). 또한 이 선재에서 나타나는 여러 가지 이차상들을 분석하기 위하여 XRD, SEM, EDS 분석을 행하였다.