• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.361-362
• /
• 2012

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.760-766
• /
• 2010

In this paper, The static friction torque and viscous friction torque including hydraulic motor-load system driven by hydraulic proportional control valve analysis. The basic experimental was performed toward characteristic in pressure and flow rate in hydraulic system energy. The variable of friction torque was experiment on brake pressure variable using pneumatic brake system. The analysis of nonlinear friction and linear friction was perform ed toward friction characteristic of hydraulic system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.8-13
• /
• 2014

The effect of several parameters to minimize the braking response time has been investigated in this study. The experimental rigs were developed and the results of the experement compared with those of simulation obtained from the net work fluid flow system analysis code (FLOWMASTER). The braking response time and pressure loss were observed at separated braking port and found out that the response time can be reduced by considering the pipe length and environmental thermal conditions. The correlation equation was also presented to predict the pressure loss at various tank pressure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.108-120
• /
• 2001

In this paper, the braking performance considering the dynamic weight is analyzed about the tractor-semitrailer vehicle. The basic brake performance, the parking brake performance, the emergency brake performance and the locking point deceleration etc. are to be calculated for the brake system design of the tractor-semitrailer vehicle. This braking performance is related to traffic regulations and braking characteristics according to the vehicle deceleration, the tire-road friction coefficient and specifications of the air brake system. The design program for the braking performance based on various design variables of the vehicle and the air brake system is developed integrating the analysis functions. This design program is developed by an object oriented programming method that is windows based. GUI (Graphic User Interface) function and the convenience of operating are greatly considered.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.1969-1975
• /
• 2012

The air brake system used in heavy vehicle is very important from the point of safety due to its weight. In general, air brake system generates relatively long response time and large loss of pressure. It is known that the response time can be decreased by optimal design of brake system, i.e., by increasing the system pressure, minimizing the air line, and material of components. In this study, We developed experimental rigs for the measurement of braking response of heavy duty trucks and compared with the simulated results obtained from the net work fluid flow system analysis code (FLOWMASTER). The effect of several parameters such as, system pressure, diameter of pipe, chamber temperature on the brake response performance have been examined.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.1
• /
• pp.17-22
• /
• 2004

The goal of this paper is to improve the position control performance of pneumatic rotary actuator with variable brake using Magneto-Rheological Fluid. The air compressibility and the lack of damping of the pneumatic actuator bring the dynamic delay of the pressure response and cause the oscillatory motion. In this study, a variable rotary brake comprising Magneto-Rheological Fluid is equipped to the joint of a pneumatic manipulator. Experiments of step response have proved that the transient response of the manipulator could be improved compared with that of the conventional control algorithm by using a phase plane switching control algorithm.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2025-2027
• /
• 2003

미끄럼방지 제동장치는 차량의 급제동 시 바퀴의 장김을 방지하여, 바퀴의 슬립을 최적으로 유지 시킴으로써 제동거리를 단축시키고, 운전자가 차량 조향성을 유지할 수 있게 만드는 차량 안정장치이다. 이 장치는 비행기의 착륙거리를 줄이기 위해 개발된 이래로, 철도 및 차량 등에도 널리 적용되고 있으며, 국내에서도 이미 승용차를 위주로 양산되고 있는 추세이다. 이러한 미끄럼방지 제동 장치는 공압 브레이크 장치를 사용하는 대형차량 분야에서는 아직 국내에서 적용된 사례가 없었으나, 지난 3 년간의 연구개발의 성과로 대형 버스에 적용 가능한 미끄럼방지 제동장치의 전자제어기가 개발 완료되었으며, 국제 규격을 바탕으로 국내 현실에 적합한 미끄럼방지 제동장치 장착 대형차량의 시험 규격을 정하여 이 규격에 의거 제동시험을 실시하고 개발 제어기의 성능을 평가하였다. 각 제동 시험은 $\mu$-Jump 제동시험 및 Split-$\mu$ 제동시험 등의 직진 주행 중 급제동시험, 급제동 중 차선변경 시험, 장애물 회피 제동시험 등을 포괄하며 국제적인 규격을 기준으로 정한 독자 규격을 만족하였다. 본 논문에서는 공압 브레이크를 장착한 대형차량의 미끄럼방지 제동장치의 제동성능평가 시험방법을 소개하고, 이 방법에 의해 성능평가 시스템 및 측정 시스템을 구성하여, 개발 전자제어기의 우수성을 확인하였으며, 그 측정결과의 일부를 제시하였다.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2320-2322
• /
• 2004

전자제어식 미끄럼방지 제동장치 (ABS, Antilock Brake System)는 차량의 급제동시 발생할 수 있는 바퀴의 슬립을 방지하여 차량의 제동거리를 단축시키고 주행 성능을 향상시키는 차량 내 안전장치이다. 지난 몇 년 동안 공압식 제동시스템을 사용하는 대형차량에 적합한 미끄럼방지 제동 제어기를 연구해 왔다. 이 제어기는 바퀴의 슬립율과 그 변화량을 이용한 제어 법칙을 유도하여, 제어 파라미터로 사용하고 있다. 이러한 제어 파라미터의 튜닝에는 맡은 반복적인 실험이 요구된다. 이러한 요구에 부응하기 위하여 차량의 제동을 실시간으로 모사 할 수 있는 HILS (Hardware In-the Loop Simulation) 시스템을 개발, 구축하였다. 개발 HILS는 공압식 브레이크 시스템 및 14 자유도를 가지는 차량 동역학 모델 및 타이어-바퀴 동역학을 소프트웨어 모델로 사용하고, 개발 중인 전자제어식 미끄럼 방지 제동 제어기를 하드웨어로 사용하여, 바퀴속도 센서 신호 모의 장치 및 공압 엑추에이터 모의 신호등의 인터페이스 장치를 사용하여 제동중인 차량의 상태를 실시간으로 시뮬레이션 및 감시할 수 있다. 이 개발 HILS를 이용하여 제동 제어기의 제어 파라미터의 튜닝을 짧은 시간에 성공적으로 끝낼 수 있었을 뿐만 아니라, HILS 실험을 마친 제어기는 미끄럼 방지 제동 시험장에서 실차 주행 시험을 무사히 마침으로써, 개발 기간과 비용을 절감할 수 있는 하드웨어를 이용하는 시뮬레이션의 효용성을 간접적으로 증명하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.152-167
• /
• 2001

Recently safety systems for the commercial vehicle have been rapidly developed. However, we still have many problems in the vehicle stability and the braking performance. Especially, a commercial vehicle may meet a dangerous braking condition when the vehicle is lightly loaded or empty and when the road is wet or slippery. Under these conditions, the truck can spin out or the tractor can jackknife or the trailer can swing out. To design the air brake system for the commercial vehicle, since the air brake system has many design variables, there must have been intensive researches on a method how to prevent dynamic instability and how to maximize the vehicle deceleration. In this study, mathematical models about the tractor-semitrailer and the air brake system including an ABS controller have been constructed for computer simulation. Also, simple examples are applied to show the usefulness of the program. Designers can use this simulation program for understanding the braking characteristics such as trajectory, braking distance, longitudinal deceleration, lateral deceleration, and yaw rate on various road conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.119-128
• /
• 2001

Recently safety systems for the commercial vehicle have been rapidly developed. However, we still have many problems in the vehicle stability and the braking performance. Especially, a commercial vehicle may meet a dangerous braking condition when the vehicle is lightly loaded or empty and the road is wet or slippery. To design the air brake system for commercial vehicles, since the air brake system has many design variables, there must have been intensive researches on a method how to prevent dynamic instability and how to maximize the vehicle deceleration. In this study, mathematical models about an 8$\times$4 vehicle and an air brake system including an ABS controller have been constructed for computer simulation. Also, simple examples are applied to show the usefulness of the computer program. Designers can use this simulation program for understanding the braking characteristics of 8$\times$4 commercial vehicles such as trajectory, braking distance, longitudinal deceleration, lateral deceleration, and yaw rate on various road conditions.