• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.295-306
• /
• 2008

The Intersection is inner traffic facilities and the space where the roads are intersected and connected. And also, the Intersection is the decision-making section for drivers to select the route according to the geometric structure and operation method. However decision-making section cause to raise car accidents rate because it imposes a heavy burden on drivers. In that reason, many countries such as Europe use the Roundabouts to reduce the numbers of decision making and collision. In Korea, the kinds of method are just introduced and it is using now but there are no exact standards. Hence, this study suggests the process to evaluate and determine the types of Intersection which are based on the traffic flow (congestion) and traffic safety (accidents). Firstly, this study presents the number of accident at each Intersection which is depended on the traffic volume. Secondly, this study calculates and analysis the accident at signalized Intersection, non-signalized Intersection and Roundabout by TSIS-NETSIM program. Thirdly, this study concludes the best suitable Intersection type through the materials which are mentioned before.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.1-10
• /
• 2008

Recently, the Seoul Metropolitan Government (SMG) has initiated several urban redevelopment projects to revitalize the downtown well equipped for transit oriented development (TOD). Since, TOD should incur higher density development in our context, it has negative impacts on travel patterns, congestion, and urban environmental quality. The purpose of this study is to develop new transportation service index which can facilitate higher density TOD. This study includes relevant foreign case studies, the development of multimodal transportation index, and the impact analysis of TOD when it is applied in the downtown Seoul. In chapter III, it developed a so-called ITLOS, new multimodal transportation service index which shows the possibility of accommodating further development by integrating roadway service index with public transportation service index. The study sets ten policy scenarios by varying densities, and run the Seoul Congestion Management Model (SECOMM) to estimate the sustainable transportation impacts of TOD in the downtown. Travel speed index that only represents the availability of road capacity for development reveal that higher density development in the downtown can deteriorate traffic congestion while improving region-wide transportation level of service in Seoul. Also, it is proved that higher density development is more feasible when using ITLOS as the index because it considers not only available road capacity but subway capacity in the analysis area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.317-323
• /
• 2008

Mass transit information can contribute many benefits to users. Especially, transportation information technology is developing highly with information technology in Korea recently. Hereafter, it is expected to give customized transportation information to users individually with the advent of ubiquitous age in earnest. This public transportation information service can be realized by path finding algorithm in public transportation networks including travel and transfer attributes. In this research, constraints are constructed with the primary facts influencing users. Moreover, the method reducing user's path finding condition arbitrarily is proposed by making the maximum value as variables. In this study, transfer frequency, total travel time, seat confirmation, transfer time and travel time become constraint condition based on k path finding algorithm considering service time constraint condition. Moreover, case study about user customized transfer information is performed in Seoul and metropolitan subway networks.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6C
• /
• pp.321-329
• /
• 2008

In this study, a series of column test as a way in order to make up for the weakness point of the conventional acceleration method were conducted to both propose the suction board drain method and grapes the specific improvement character of this method as a result of a sort of plastic drain board and a phase of vacuum pressure conditions. On this occasion, the study focused on computing the effective factors of the fittest Suction board drain method affected by each condition through confirming the settlement generated during the test, the water content reduction and stress increase effect occurred arising from the test, and the ratio of consolidation related to the improvement period. In accordance with the shape of core and that whether the core is attached to the filter(pocket or adhesion), the castle type of adhesion and the column type of pocket are more efficient than the others as a consequence of the test to find out the improvement effect depending on each drainage such as a castle type, coil type, harmonica type, column type of pocket and a castle of the adhesion. In case of the step suction pressure, the shorter the period of $-0.8\;kg/cm^2$ as a final step of the suction pressure is, the better the improvement is. In addition, the correlation between degree of consolidation per each suction pressure level and duration of application was drawn as a curve and the point of inflection on this curve was provided to determine the duration period to maximize the consolidation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2B
• /
• pp.169-177
• /
• 2010

Recently due to the typhoon and extreme rainfall induced by abnormal weather and climate change, the probability of severe damage to human life and property is rapidly increasing. Thus it is necessary to create adequate and reliable flood risk map in preparation for those natural disasters. The study area is Seo-gu in Daegu which is located near Geumho river, one of the tributaries of Nakdong river. Inundation depth and velocity at each time were calculated by applying FLUMEN model to the target area of interest, Seo-gu in Daegu. And the research of creating flood risk map was conducted according to the Downstream Hazard Classification Guidelines of USBR. The 2-dimensional inundation analysis for channels and protected lowland with FLUMEN model was carried out with the basic assumption that there's no levee failure against 100 year precipatation and inflow comes only through the overflowing to the protected lowland. The occurrence of overflowing was identified at the levee of Bisan-dong located in Geumho watershed. The level of risk was displayed for house/building residents, drivers and pedestrians using information about depth and velocity of each node computed from the inundation analysis. Once inundation depth map and flood risk map for each region is created with this research method, emergency action guidelines for residents can be systemized and it would be very useful in establishing specified emergency evacuation plans in case of levee failure and overflowing resulting from a flood.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1C
• /
• pp.63-72
• /
• 2006

Due to rapid development of many cities in Korea, many public facilities are required to be built as well as complementary civil structures. Consequently, a number of tunnel constructions are currently carried out throughout the country, and many more tunnels are planned to be constructed in the near future. Tunnel excavation in a city often causes serious damage to above-ground structures and sewer system because of unexpected settlement. In order to prevent the destruction, the tunnel, which bypasses the center of a city, must be specially evaluated for its influence to other structure. In addition, since a slight disturbance of above-ground structure causes numerous public complaints and civil appeals, it must be approached with different method than the mountain tunnels. In this paper, the evaluation method using the Artificial Neural Network (ANN) has been studied. The method begins with an analysis of the minimal sectional area. If its result can be used to approximate the general influence of the whole section, the actual evaluation using ANN will take off. In addition, it also studies the construction management method which reflects the real time soil behavior and environment influence during construction using Geographic Information System (GIS).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1D
• /
• pp.27-36
• /
• 2010

Recently, the management of metro business in large cities has become more difficult because of increased construction and operation costs. The purpose of this paper presents the construction of transfer system to resolve about recent tendency to decrease of metro-users and diminution of use efficiency which are serious problems of Busan metro. To cope with this situation, it is necessary to examine the methods of obtaining returns on development profits of land value rises that occur due to transfer system construction between Busan metro line #1 and line #2 in Yangsan area. Therefore, it was made use of research on metro utilization to presuppose service improvement, as an alternative, in the transfer system construction between metro and metro which might be powerful influence over metro-users. In this research, it was examined the actual situation of rises in land values brought about by the transfer system construction of metro line #1 and line #2 in Yangsan area with application of four (4) methods, and have calculated a basis of the development profits produced by the transfer system construction of metro line. According to the economical efficiency analysis, the total construction cost amount to 4,827.1 billion won of case #1 based on single track, and evaluate economically as B/C to 1.013, NPV to 72.7 billion, IRR to 5.614 percent.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.41-41
• /
• 2022

홍수는 단기간의 사상이다. 평상시 유량은 일단위로 연속유량이라 한다. 홍수해석은 사상 모형을 이용하고, 물 이용의 용수계획에서는 연속 모형에 의한다. 평상시 유량을 홍수처럼 10분, 30분, 60분 단위로 해석할 수 있으면 여러 가지로 편리하다. 홍수기에는 홍수와 이수를 동시에 분석할 수 있는 이점이 있다. 평상시에는 수문자료가 생성되는 기본단위가 10분, 60분이기 때문에 이와 일치하여 유량을 해석할 수 있는 이점이 있다. 특히 저수지에서는 운영자료가 저수율 자료만 관리되고 있는 현실을 감안하면, 연속 홍수모의의 필요성은 매우 높다. 다목적댐도 그 편의성은 말로 형용할 수 없는 수준이다. 홍수모의는 첨두유량도 중요하고, 전체 누적유량도 중요하다. 여기서는 당초 일 단위로 개발된 ONE 모형으로 연속 홍수모의의 가능성을 타진했다. 모형의 검증은 홍수사상 마다 훨씬 긴 장기간의 댐의 유입량, 저수량 오차로 실시했다. 유입량이 누적되면 저수량이 되기 때문에 저수량을 비교하면 확실한 검증 방법이 된다. 유역면적 930.0km², 총저수량 8억1,500만m³인 용담댐과 유역면적 218.80km², 유효저수량 3,498만m³인 탑정지를 대상으로 60단위의 장기간 연속 홍수모의 결과를 제시한다. 첫째, 용담댐에 대해 2020년 3월1일부터 6월30일까지 연속유입량을 모의한 결과(ONE모형 매개변수 α=3.18), 면적우량은 최대 12.5mm, 총 371.2mm(3억4,522만m³)였고, 유입량은 최대 1,363.0m³/s, 총 1억8,326만m³로 유출률 53.1%였다, 관측 유입량은 최대 766.1m³/s, 총 2억9,152만m³로 유출률 84.4%로 나타났다. 관측 유입량이 높은 것으로 평가했는데 그 이유는 산정된 유입량이 넓은 수면적에서 오는 음유입량이 발생하는데 이를 0으로 처리하고, 음의 누적 값이 전체유량에 더해지는 계산의 한계에서 비롯한다. 이는 현실적 제한이며, 개선이 필요하다. 댐 수위로 검증한 결과는 관측수위는 EL.257.97~262.92m, 평균 EL.260.40m, 모의수위는 EL.257.22~262.88m, 평균 EL.260.02m로 나타났고, RMSE는 0.174, NSE는 0.959, R²는 0.968로 만족한 결과를 얻었다. 둘째, 탑정지에 대해 2020년 3월1일부터 6월30일까지 연속유입량을 모의한 결과(ONE모형 매개변수 α=3.18), 면적우량은 최대 18.5mm, 총 311.4mm(6,813만m³)였고, 유입량은 최대 187.8m³/s, 총 3,691만m³로 유출률 54.2%였다. 저수지 수위로 검증한 결과 관측수위는 EL.26.55~29.79m, 평균 EL.29.01m, 모의수위는 EL.26.16~29.92m, 평균 EL.29.07m로 나타났고, RMSE는 0.563, NSE는 0.877, R²는 0.943로 만족한 결과를 얻었다. 정리하면 2020년 4개월의 장기간 용담댐과 탑정지에 대한 1시간 간격의 연속 홍수모의의 결과는 그 활용 가능성이 충분하다고 말하고 있다. 이 결과로부터 평상시 댐과 저수지의 실시간 운영자료 검증 및 생산체제의 수문관측업무에 활용 가능한 것으로 평가했다.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.47-62
• /
• 2023

Using the dynamic panel model, this study investigates rent determinants for small and medium-sized office buildings in Korea's CBD and Gangnam areas, key business districts. The results reveal that rents for small and medium-sized office buildings in CBD and Gangnam areas are influenced by macroeconomic fluctuations and characteristics of buildings and locations, suggesting a market with both spatial consumer and investment goods attributes. There are several investment implications as follows. First, even if the location in the CBD area is advantageous, the practical limitations in renovating aging small and medium-sized office buildings must be taken into account when investing. Second, parking conditions are a key factor influencing rent prices in CBD areas, so evaluating the parking facilities and improvement potential of small and medium-sized office buildings is essential for investors. Finally, due to the high sensitivity of Gangnam's small and medium-sized office market to macroeconomic trends, it's vital to prioritize monetary policy shifts as a key factor in investment decisions.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.10
• /
• pp.455-460
• /
• 2023

Text augmentation is a methodology that creates new augmented texts by transforming or generating original texts for the purpose of improving the performance of NLP models. However existing text augmentation techniques have limitations such as lack of expressive diversity semantic distortion and limited number of augmented texts. Recently text augmentation using large language models and few-shot learning can overcome these limitations but there is also a risk of noise generation due to incorrect generation. In this paper, we propose a text augmentation method called TAGS that generates multiple candidate texts and selects the appropriate text as the augmented text. TAGS generates various expressions using few-shot learning while effectively selecting suitable data even with a small amount of original text by using contrastive learning and similarity comparison. We applied this method to task-oriented chatbot data and achieved more than sixty times quantitative improvement. We also analyzed the generated texts to confirm that they produced semantically and expressively diverse texts compared to the original texts. Moreover, we trained and evaluated a classification model using the augmented texts and showed that it improved the performance by more than 0.1915, confirming that it helps to improve the actual model performance.