• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.65-70
• /
• 1996

엔진소음을 소음특성에 따라 분류하면 공력소음(Aerodynamic Noise), 연소소음(Combustion Noise), 기계적인 소음(Mechanical Noise)으로 나눌 수 있으며 소음원의 종류에 따라 분류하면 배기계소음(Exhaust System Noise)으로 나눌 수 있으며 소음원의 종류에 따라 분류하면 배기계소음(Exhaust System Noise), 흡기계소음(Intake System Noise), 냉각계소음(Cooling System Noise), 엔진표면소음(Engine System Noise)등으로 분류할 수 있다. 이러한 여러소음중 엔진 내부의 유동에 의한 흡배기계통으로의 소음방출은 자동차 실 내외 소음의 중요한 문제로 대두되는데, 이를 줄이기 위해 그 동안 소음기 등의 서브시스템의 형태와 그 위치조정에 관한 연구가 수행되어 왔다. 그러나 이것이 비용 또는 성능에 영향을 미치므로 본질적인 소음원을 규명해 내는 것이 필요하게 되었다. 흡배기계의 소음은 엔진의 흡입, 배기행 정시 피스톤의 운동에 의해 팽창 및 압축파 형태의 압력파(pressure wave)로 발생하게 되고, 밸브근방에서는 유동의 박리(separation)에 의해 발생하게 된다. 소음기 등의 서브시스템에서도 유동의 박리에 의해 발생하게 되며 특히 배기행정시 발생하는 압력파는 비선형영역에 있게된다. 흡기소음은 배기에 비해 그 크기가 작아서 그동안 등한시 되어왔으나 이것이 소비자의 불평요인으로 작용하므로써 이에 대한 연구도 활발히 수행되어야 한다. Bender, Bramer[1]는 흡배기계 소음의 외부 방사에 관하여 전반적으로 기술하였고 Sierens등[2]은 흡기계에서 1차원 MOC(Method of Characteristics)방법으로 비정상 유동해석을 하고 실험결과와 비교하였다. J.S.Lamancusa 등[3]은 흡기 소음원을 실험을 통해 예측하였고, 흡기소음도 비선형 거동을 보인다고 밝혔다. Yositaka Nishio 등[4]은 새로운 흡기실험장치를 고안하여 공명기(resonator)의 위치 변화에 의한 저소음 흡기계를 설계 초기단계에서부터 적용하려 하였다. 일반적으로 흡배기계의 복잡한 형상 때문에 대부분 실험을 통해 문제를 해결하려 하였고, 수치해석은 피스톤의 운동을 배제한 단순화한 흡배기계의 정상상태 유동해석이 주를 이루어왔다. Taghaui and Dupont 등[5]은 KIVA코드를 사용하여 흡기포트와 연소실 그리고 밸브의 움직임을 동시에 고려한 수치해석을 도입하였다. 하지만 이들이 밸브의 운동을 고려하기 위해 사용한 이동격자는 격자점은 시간에 따라 변화하지만 그 격자의 수가 일정하게 유지되어 있어서 밸브의 완전개폐를 해석할 수가 없다. 강희정[6]은 단일 실린더와 단일 배기밸브를 갖는 문제로 단순화하여 피스톤과 밸브의 움직임을 고려하므로써 배기행정 후 소음이 어떻게 전파해 나가는가를 연구하였다. 본 연구에서도 최소밸브간격과 최대밸브간격 사이에서만 계산이 가능하나 흡기의 경우는 밸브가 닫힐 때 생기는 압력파가 중요하므로 실린더와 밸브사이에 벽면조건을 주어 밸브의 개폐를 모사하였다.

• The KIPS Transactions:PartB
• /
• v.18B no.2
• /
• pp.57-66
• /
• 2011

To prevent cardiac diseases, quantifying cardiac function is important in routine clinical practice by analyzing blood volume and ejection fraction. These works have been manually performed and hence it requires computational costs and varies depending on the operator. In this paper, an automatic left ventricle segmentation algorithm is presented to segment left ventricle on cardiac magnetic resonance images. After coil sensitivity of MRI images is compensated, a K-mean clustering scheme is applied to segment blood area. A graph searching scheme is employed to correct the segmentation error from coil distortions and noises. Using cardiac MRI images from 38 subjects, the presented algorithm is performed to calculate blood volume and ejection fraction and compared with those of manual contouring by experts and GE MASS software. Based on the results, the presented algorithm achieves the average accuracy of 6.2mL${\pm}$5.6, 2.9mL${\pm}$3.0 and 2.1%${\pm}$1.5 in diastolic phase, systolic phase and ejection fraction, respectively. Moreover, the presented algorithm minimizes user intervention rates which was critical to automatize algorithms in previous researches.

• Journal of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.298-303
• /
• 1972

The adduct between phenylglyoxal and guanine was prepared. The structure of the adduct is similar to the glyoxal-guanine adduct. Aldehyde group of phenylglyoxal is added to 1-N of guanine base, and keto group is added to $N^2$ of guanine base. The structure of the adduct was determined by mass spectrometry, nuclear magnetic resonance spectroscopy and periodate oxidation. Periodate oxidation produced $N^2$-benzoyl-guanine from the adduct. On the basis of these results, ittvhas been assigned the structure I. The adduct is stable in alkaline solution: It does not dissociate into phenylglyoxal and guanine even after 2 hours heating at$60^{\circ}C$ at pH 12. The adduct is soluble in acidic ethanol, and is slightly soluble in neutral or alkaline water. It has a lower $A_{280}/A_{260}$ ratio at pH 1 compared to that of guanine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.178-184
• /
• 2017

This study was performed on 16 patients diagnosed with tsutsugamushi disease and cerebral infarction from January 2007 to December 2015. An acute cerebral infarction was diagnosed by brain MRI and MRA. Tsutsugamushi disease was diagnosed using a polymerase chain reaction. To distinguish the difference between the generalized cerebral infarction and infarction with tsutsugamushi disease, the blood pressure and body temperature were measured uponadmission. In general, the blood pressure increases during an acute cerebral infarction. Interestingly, in this study, 12 patients showed a systolic blood pressure less than 130 mmHg uponadmission. The location of the cerebral infarction and whether single or multiple cerebral infarction were examined. Thirteen patients had a cerebral infarction in anterior circulation and 3 patients developed in posterior circulation. To evaluate the coagulation disorders, prothrombin time (PT), activated partial thromboplastin time (aPTT), D-dimer, fibrinogen, fibrin degradation product (FDP). D-dimer, which is generally known to increase in an acute cerebral infarction, showed a significant increase in the 13 patients. Fibrin degradation products (FDP) showed a significant increase in 15 patients. The pathophysiological mechanism of tsutsugamushi disease is known as vasculitis, which may result in an endothelial cell injury and proliferation of the endothelial wall, which may lead to a cerebral infarction accompanied by coagulopathy. Without endothelial cell damage and proliferation, a vasospasm caused by vasculitis may cause vasoconstriction and cerebral infarction.

• Journal of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.277-282
• /
• 1985

The effects of linear free energy relationship (LFER) on the imidoyl proton (H${\alpha}$)-substituent chemical shift (SCS) in case of varying para-substituted C-phenyl group in N-benzylideneaniline derivatives were studied. The H${\alpha}$-SCS values and LFER parameters such as ${\sigma}$,${\sigma}^+$, ${\sigma}_I$,${\sigma}_R, F and R were applied to the Hammett, Okamoto-Brown, and Taft, Swain-Lupton's dual substituents parameter (DSP) equations. The results were: (1) the blending coefficient values, ${\lambda}$ = 2.8∼3.2, it's means that the resonance effect (R) was larger than inductive effect (I) and field effect (F), and (2) the values of percent resonance and percent field effects were %R = 66.6 and %F = 33.4, respectively, yielding the ratio of resonance effect (R) to field effect (F) of 2 : 1.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.433-437
• /
• 2007

Bis(dithiobenzil) metal complex, used as functional NIR absorbing dye and photostabilizer, was synthesized using bezoin and anisoin as intermediate compounds. And squarylium, a charge generation material, was synthesized to find its photostability effect. The structure of the product was determined by $^1H-NMR$ and FT-IR and the thermal property was analyzed by DSC and TGA. Optical property and photostability were determined by UV-Vis-NIR spectroscopy. High absorbance was obtained in the NIR range and maximum absorbing wavelength was shifted depending on the nature and position of substituent in the bis(dithiobenzil) metal complex. The photofading effect of squarylium decreased by the addition of bis(dithiobenzil) metal complex.

• Journal of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.196-203
• /
• 1991

The $pK_a$ values of benzoic acid and meta, para-halogen substituted benzoic acids in MeOH-$H_2O$ mixtures (0∼80% of MeOH) have been determined at 25$^{\circ}$C using a conductometric method on the basis of the Fuoss-Kraus equation, and further verified using modified conductometric method of Gelb. The dependence of $pK_a$ on halogen substituents has been discussed in terms of substituent-constant (${\sigma}$), which is devided into electron-withdrawing inductive contribution (${\sigma}_1$) and electron-donating ${\pi}$-resonance one (${\sigma}_R$). The linear-dependence of ${\sigma}_1$'s on $D^{-1}$ with positive slope and that of ${\sigma}_R$'s on $D^{-1}$ with negative slope have been interpreted on the basis of field effect and through-space interaction of ${\pi}$-lone pair of halogen substituent and ionization center via ${\pi}$-system of benzene ring.

• Journal of Chest Surgery
• /
• v.39 no.6 s.263
• /
• pp.486-489
• /
• 2006

A 16 year-old boy was admitted to our department because of mild chest discomfort and mild dyspnea. A mass involving posterior wall of the left ventricle near posterior mitral annulus was found on echocardiography and cardiac MRI. Total excision of the mass was performed via posterior ventriculotomy under the cardiopulmonary bypass. The pathologic diagnosis revealed mature cardiac myocyte hamartoma. There was no evidence of arrhythmia and tumor recurrence during the 1 year of follow up after the surgery.

• Progress in Medical Physics
• /
• v.9 no.1
• /
• pp.1-9
• /
• 1998

In order to provide complementary image data, CT(computed tomography), MR(magnetic resonance) and angiography have been used in the field of Stereotactic Radiosurgery(SRS) and neurosurgery. The aim of this work is to develop 3-D stereotactic localization system in order to determine the precise shape, size and location of the lesion in the brain in the field of Stereotactic Radiosurgery(SRS) and neurosurgery using multi-image modality and multi purpose QA phantom. In order to obtain accurate position of a target, Hitchcoke stereotactic frame and CT/angiography localizers were rigidly attached to the phantom with nine targets dispersed in 3-D space. The algorithms to obtain a 3-D stereotactic coordinates of the target have been developed using the images of the geometrical phantom which were taken by CT/angiography. Positions of targets computed by our algorithms were compared to the absolute position assigned in the phantom. Outlines of targets on each CT image were superimposed each other on angiography images. A spatial mean distance errors were 1.02${\pm}$0.17mm for CT with a 512${\times}$512 matrix and 2mm slice thickness, 0.41${\pm}$0.05mm for angiogra- phy localization. The resulting accuracy in the target localization suggests that the developed system has enough Qualification for Stereotactic Radiosurgery (SRS).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.102-109
• /
• 2019

This paper describes the design of the circuit card assembly to eliminate the communication error on a servo control unit installed in the automated resupply vehicle K56. K56 is a weapon system that automates the supply and loading of ammunition on the K-55A1 self-propelled artillery. As the core item responsible for ammunition movement control, the servo control unit is required to have good communication stability and reliability, but the conventional unit has recognized a problem that communication error intermittently occurs, resulting in an emergency stop phenomenon. We analyzed the communication signal of the servo control unit and identified the failure cause of the circuit card assembly to solve this problem. In addition, the signal interference in data/address line of the circuit card assembly was confirmed through analysis of the failure cause, and redesigned to avoid the interference, such as adjustment of the distance between communication lines and position change. Finally, the proposed cause analysis and redesign were verified through the component of servo control unit and attachment test on K56. We expected these study results to be used as reference for the design of other similar items.