• Korean Journal of Weed Science
• /
• v.3 no.1
• /
• pp.69-74
• /
• 1983

The behaviour of mixtures of herbicides was determined to obtain the basic informations about effective herbicide use, enhancing herbicidal efficacy and reducing the chemical cost. Fourteen herbicides with 91 mixed combinations were evaluated by Limpel et al method at the Echinochloa crus galli Beauv-Monochuria vaginalis Presl.-Scirpus hotarui Ohwi (importance values of these weeds were 63%, 16% and 10%, respectively) community type. Thirty eight mixed combinations showed the antagonistic response. Among these 14 mixed combinations including chlormethoxynil + naproanilide mixture were greater than 11% in antagonistic effect. On the other hand, 40 mixed combinations including chlormethoxynil + SW751 mixture showed additive response (${\pm}2%$). For synergistic response, 13 mixed combinations were belonged to this group. Particularly, 3 mixed combinations, chlormethoxynil + butachlor, chlormethoxynil + bifenox and nitrofen + ACN/MCPB/nitrofen mixtures were greater than 11% in synergistic effects. The mixture of thiobencarb + oxyfluorfen was analyzed by isobole technique. This mixture showed the synergistic response and the interaction index was approximately 2. The most optimum mixtur for inducing 90%n weed suppression was 0.012 kg ai/ha for oxyfluorfen and 0.45 kg ai/ha for thiobencarb.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.22-22
• /
• 1998

기존의 공력 조타에 의한 비행 자세 제어 방법은 속도의 2승에 비례하는 제어력을 발생하지만, TVC(Thrust Vector Control)를 이용하면 추력 방향을 변경하여 제어력을 얻음으로써 방향 제어에 보다 월등한 성능을 발휘하는 것으로 알려져 있다. 후자의 방법으로는 저속도 경우와 공기가 희박한 고 고도에서도 충분한 제어력을 얻을 수 있다. 보다 효율적인 제어력을 얻기 위해서는 TVC 방법이 우수하지만 그 성능에 대해서는 충분한 자료가 없는 것이 현재의 상태이다. 제트 베인 방식의 TVC는 베인이 직접 고온 고속의 가스 흐름 내에서 작용하기 때문에 편향추력 발생 측면에서 아주 우수한 방식이며 추력 편향각, 추력 손실 등의 유체역학적인 특성은 제트 베인의 형상, 위치 등으로 결정된다.

• Cross-Cultural Studies
• /
• v.46
• /
• pp.113-142
• /
• 2017

The goal of this paper is to analyze the vocabularies and cases related to Kimchi as a cultural history. For this purpose, we extract the vocabularies of Kimchi from the records of Korean Literary Collection in Classical Chinese, Annals of the Choson Dynasty, Records of Daily Reflection, and Diary of the Royal Secretariat. The existing literatures related to Kimchi are confined to some cookbooks, but in this study, we attempt to overcome the existing limitations and adopt a comprehensive and systematic approach. The classic literatures of the Choson Dynasty are mainly recorded in traditional Chinese characters; therefore, the readability is poor, and it is presupposed that a lot of time and effort will be needed for the translation work after securing the data. Therefore, we performed this research with a focus on this part. Next, we tried to reconstruct the archetype of Kimchi culture in the Choson Dynasty by classifying the above materials according to the subject and literature sources.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.432-436
• /
• 2007

본 연구의 목적은 3차원 풍력터빈 블레이드 최적형상설계를 위한 실용적이고 효율적인 설계 과정을 구현하는 것이다. 국내 연안의 해상풍력에 적용하기 위해서 통계적 모델을 이용하여 풍황 자료를 분석하였다. 설계에 관련된 많은 수의 설계변수를 효과적으로 관리하기 위해서 설계과정은 운용조건 최적화와 블레이드 형상설계의 2단계로 구성하였다. 실험계획법에 의해 추출된 각 운용조건점은 형상설계를 위한 입력값으로 제공된다. 형상설계 단계에서는 최소에너지손실 조건과 결합된 BEMT를 이용하여 각 블레이드 단면에서의 시위길이와 피치각 분포를 최적화하였다. 블레이드 단면 익형은 NREL S830을 이용하였고, 익형의 공력성능은 XFOIL을 이용하여 예측하였다. 설계된 블레이드 형상의 성능해석을 수행하고 그 결과를 바탕으로 반응면을 구성하였다. 좀 더 나은 성능을 가진 블레이드 형상을 찾기 위해서 초기설계공간에서 확률적 방법을 이용하여 타당성 있는 설계공간까지 운용조건 설계변수를 이동시키고 구배최적화 기법을 통해 각각의 제약함수를 만족하면서 연평균발생에너지를 최대로 하는 최적블레이드 형상을 구현하였다. 제시된 최적설계과정은 풍력터빈블레이드 개발에 실용적이고 신뢰성 있는 설계툴로서 사용이 가능하다.

• New & Renewable Energy
• /
• v.3 no.3
• /
• pp.63-71
• /
• 2007

본 연구의 목적은 3차원 풍력터빈 블레이드 최적형상설계를 위한 실용적이고 효율적인 설계과정을 구현하는 것이다. 국내 연안의 해상풍력에 적용하기 위해서 통계적 모델을 이용하여 풍황자료를 분석하였다. 설계에 관련된 많은 수의 설계변수를 효과적으로 관리하기 위해서 설계과정은 운용조건 최적화와 블레이드 형상설계의 2단계로 구성하였다. 실험계획법에 의해 추출된 각 운용조건 설계점은 형상설계를 위한 입력 값으로 제공된다. 형상설계 단계에서는 최소에너지손실 조건과 결합된 BEMT를 이용하여 각 블레이드 단면에서의 시위길이와 피치각 분포를 최적화하였다. 블레이드 단면 익형은 NREL S830을 이용하였고, 익형의 공력성능은 XFOIL을 이용하여 예측하였다. 설계된 블레이드 형상의 성능해석을 수행하고 그 결과를 바탕으로 반응면을 구성하였다. 좀 더 나은 성능을 가진 블레이드 형상을 찾기 위해서 초기설계공간에서 확률적 방법을 이용하여 타당성 있는 설계공간까지 운용조건 설계변수를 이동시키고 구배최적화 기법을 통해 각각의 제약함수를 만족하면서 연간에너지생산량을 최대로 하는 최적블레이드 형상을 구현하였다. 제시된 최적설계과정은 풍력터빈블레이드 개발에 실용적이고 신뢰성 있는 설계툴로서 사용이 가능하다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.11-19
• /
• 2002

Inflating characteristics of the parachute canopies have been experimentally investigated with the objective of measuring the parachute opening parameters such as canopy filling time and the peak opening force using scaled parachute models. A device has been made and tested to eject a model parachute into a wind tunnel flow and to measure the drag force acting on it. The force-time histories and the peak opening force are obtained, and these comparative aerodynamic characteristics were analyzed and discussed, including the effect of forebody wake. The opening of the ringslot parachute model appeared to be faster than that of the available similar data by about 10~40%, and fair to good agreement was obtained for the reefed ribbon parachute.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.97-103
• /
• 2004

Nowadays, many kinds of research for airship are studying with increasing of interests of airship. But these are far from perfect. The data acquisition from the actual flight test has lots of difficulties because of the characteristics from the slow dynamic response and high sensitivity for external environment. In this paper, through the actual flight test, appropriateness of the mathematical dynamic model applied here was verified by comparing the test data with simulation data in same control conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.215-218
• /
• 2011

An air data acquisition algorithm has been developed for the supersonic flow at the preliminary design stage with pressure data acquisition device composed of major three total pressure sensors and two static pressure sensors. Through this algorithm, Mach number, angle of attack and sideslip angle can be very easily derived with simple interpolation algorithm and predefined data tables. In this preliminary design stage, to verify the developed algorithm, the data tables are constructed with data driven by Taylor Maccoll equation. Furthermore, these data are compared and modified with computational results based on CFD analysis. The present algorithm would be useful to get supersonic air data for the various aerial vehicles and their flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.26-34
• /
• 2006

The thermo-mechanical analysis and test were performed for plate structure under mechanical and thermal loading conditions. Infrared heating system and hydraulic loading system were used to simulate mechanical and thermal environment for the plate structure which is similar to the fin of the airframe. Also, FEM analysis using plastic option was added to evaluate thermo-mechanical behavior. Thermo-mechanical tests were conducted at elevated temperature and rapid heating(10℃/sec) condition with external loading together. To investigate the effect of heating environment, the strength at room temperature was compared with that of elevated temperature and rapid heating condition. A methodology for test and analysis for supersonic vehicle subjected to aerodynamic loading and heating was generated through the study. These experimental and analysis results can be used for designing thermal resistance structures of the supersonic vehicle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.274-279
• /
• 2010

The present work is to analyze the longitudinal static stability and the drop trajectory of fighter aircraft's external fuel tank, of which horizontal fin is modified as the 20% scale down size compared with the original one. The analytical results to the pitching stability of external fuel tank using a thin airfoil's aerodynamic force data show the corresponding tendency to results of wind tunnel experiment. Results of trajectory simulation by the 6 degree of freedom equations of motion, comparing with drop trajectories of wind tunnel experiment, are shown that aircraft's attitude affects strongly on horizontal movement but not on the vertical movement. Those results give the reliability to aircraft safety when the external fuel tank with the 20% reduced horizontal fins is released from aircraft based on the flight manual.