• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.610-622
• /
• 2021

The DECOVALEX project is one of the representative international cooperative projects to enhance the understanding of the complex Thermo-Hydro-Mechanical-Chemical(THMC) coupled behavior in the high-level radioactive waste disposal system based on the numerical simulation. DECOVALEX-2023 is the current phase consisting of 7 tasks, and Task C aims to model the THM coupled behavior in the disposal system based on the Full-scale Emplacement (FE) experiment at the Mont-Terri underground rock laboratory. This study performs the numerical simulation based on the OGS-FLAC developed for the current study. In the numerical model, we emplaced the heater with constant power horizontally based on the FE experiment and monitored the pressure development, temperature increase, and mechanical deformation at the specific monitoring points. We monitored the capillary pressure as the primary effect inducing the flow in the buffer system, and thermal stress and pressurization were dominant in the surrounding rocks' area. The results will also be compared and validated with the other participating groups and the experimental data further.

• Geotechnical Engineering
• /
• v.13 no.6
• /
• pp.95-106
• /
• 1997

A pressuremeter is an expandable tube which is placed in the soil, and then expanded under controlled condition against the soil. From this test a pressure expansion curve of the soil can be obtained. However soil disturbance during the test has significant influence on the results of tests. A general governing equation for pressuremeter test can be theoretically derived on the basis of the hyperbolic soil model and the cavity expansion theory. The curve fitting technique was used to establish the pressure-strain curve without disturbance of soil during testing. This interpretation makes use of both the loading and unloading portions of the test. An interpretation methodology is described and illustrated with pressuremeter test data carried out in the weathered granitic soil to estimate initial shear modulus. Standard penetration test is a very common site investigation technique in Korea. Therefore the blow counts of standard penetration test are discussed by comparing them with initial shear modulus.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.186-192
• /
• 2013

Because of the shallow depth of 44 m and large area of wetland in Korea and China, the class I productivity of Yellow Sea is very high (>300 $gC/m^2/year$), which is supporting substantial populations of fish, invertebrates, marine mammals and seabirds. However, the Yellow Sea is a large marine ecosystem which is enclosed by mainland of China and Korean peninsula, so it is vulnerable to external stress such as environmental degradation and overfishing. Recently, since the Fisheries Agreement between Korea and China, overfishing and illegal fishing of China and environmental degradation caused by coastal development in Korea and China have given much stress to the marine ecosystem of Yellow Sea. This article suggests that the major factors of governance are ineffectively responding to the growing demand for exploitation of the Yellow Sea and the international cooperation for establishing network of Yellow Sea governance is urgent.

• Economic and Environmental Geology
• /
• v.47 no.5
• /
• pp.551-561
• /
• 2014

Natural gas is the world's fastest-growing fossil fuel, with consumption increasing from 113 trillion cubic feet(Tcf) in 2010 to 185Tcf in 2040. While conventional natural gas streams from the earth relatively easily, unconventional gas finds are more difficult to develop and more costly to produce. Right now, there are six main types of unconventional gas, including deep gas, gas-containing shale, coalbed methane(CBM), geopressurized zones, Arctic and subsea hydrates, and tight gas. Tight gas refers to natural gas reservoirs locked in extraordinarily impermeable, hard rocks(sandstone, siltstone or carbonate sedimentary rocks). In this study, we analyzed total 375 papers(2000-2014) of tight gas by country, institution, international cooperation etc.

• Korean Journal of Health Education and Promotion
• /
• v.12 no.2
• /
• pp.139-145
• /
• 1995

본 연구의 목적은 알코올 문제의 현황을 파악하고 효과적인 음주교육 방안을 모색하기 위한 것이다. 사회문화적 행위로서의 음주행동의 특징을 파악하고 음주로 인한 위해가 우리에게 미치는 영향을 파악하기 위한 것이다. 음주행동은 한 사람이 속한 사회의 문화와 관습이 허용하는 범위에 따라 그 사회가 공유하는 음주에 대한 태도나 가치의 영향을 받아 학습을 통해 습득하게 된다. 음주는 사망률, 이환율, 유산율, 범죄율 등에 막대한 영향을 끼치고 있으며 이로 인한 사회적 비용과 생명손실은 엄청난 것이다. 매스미디어를 통한 음주교육은 다른법적 제재와 병행될 때 효과적이다. 음주연령이나 세금부과 등을 통해 음주행위를 통제하는 것이 가능하다. 음주교육의 주기능은 법령과 처벌에 대한 두려움(perceived fear)를 높이는 것이다. 음주행위에 관용적인 사회 분위기를 변화시키는 것이 법령이나 처벌보다 더 효과적이다. 과도한 음주행위에 대한 비판적인 사회적 분위기와 같은 비공식적인 사회적인 제재가 음주문제의 예방에 더욱 중요하다. 청소년의 음주행위는 부모와 동료집단과의 관계에 의해 크게 영향을 받기 때문에 부모와 동료집단의 참여하에 객관적인 태도를 통해 자율적인 결정을 할 수 있도록 유도해야 한다. 음주교육에 대해 지식과 경험을 갖춘 교사가 교육을 실시하여야 하며 소그룹 활동을 통해 음주문제에 대한 이해와 바람직한 태도를 습득하게 하고 동료집단의 압력을 거부할 수 있는 능력을 키우는 것이 필요하다. 교사는 편견이 없는 객관적인 태도를 갖추어야 하고 최종적 결정은 지식에 근거하여 청소년이 하도록 하여야 한다. 음주는 가정불화, 좌절감, 실업, 이혼 둥의 부정적 감정과 연관되어 있으며 깊은 인간관계를 통한 상담이 효과적이다. 단주친목과 같은 자발적인 민간단체는 알코올 문제를 가진 사람들이 서로 모여 친목하는 가운데 도움과 치료를 받을 수 있다는 점에서 매우 효과적이다. 이러한 단체의 활용이 더욱 확대되어야 한다. 병원에서의 음주교육은 노조의 참여하에 전문적인 의료인들에 의해 이루어져야 한다. 이전에 알코올중독에서 회복된 사람을 동료교육가(peer educator)로 활용하는 것도 효율적인 교육방법중의 하나이다. 의과대학의 교과과정에 음주교육에 대한 내용을 더욱 확대하여야 한다. 음주교육은 음주라는 행위의 저변에 깔린 문화적 심리적 요인에 대한 깊은 이해를 토대로 계획되고 실시되어야 한다. 음주교육은 지역사회 전체의 참여를 통해 부모, 학생, 정부, 민간단체, 매스미디어의 공동참여를 통한 다각적인 접근이 요구된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2015

This study examined the relationship between the shape of the inside of the PRV and the cavitation of the water supply system of an apartment house. In this paper, nine types of PRV with different gaps and shapes were analyzed numerically using a 3D model embedded in the commercial code, ANSYS-CFX. The lowest pressure and the maximum velocity occurred at the narrow gap, which is located at the between the stem and the disk. When the gap size was increased, the vapor volume fraction was always greater than 0, but the vapor volume fraction of the type of expansion pipe approached 0. These results indicate that the cavitation of PRV can be reduced by a shape change to the type of expansion pipe.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.4
• /
• pp.63-74
• /
• 1989

It is well-known that the fuel injection system if a diesel engine has taken a more important place in understanding of diesel combustion process with combustion chamber. But a diesel fuel injection system has an assembly of many complex and intricate problems such as the desired rate of injection, secondary injection and injection pump etc., in addition to the atomization for ignition and combustion, the penetration and diestribution for proper utilization of air. The analysis is carried out by simplifing and modeling the injection phenomena and dividing into three parts comprising of fuel injection pump, high pressure pipe and fuel injection nozzle. The purpose of this paper is to describe an analytical simulation of the injection system and to speed up the work of developing injection systems for new engines. The effects of important injection parameters as predicted by the present model are found to be in good agreement with experiment. It can be seen that there is an optimal pipe diameter for maximum quantity injected.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.699-702
• /
• 2009

가스하이드레이트(Gas Hydrate)는 특정한 온도와 압력조건하에서 물분자로 이루어진 공동 내로 메탄, 에탄, 프로판 등의 가스가 들어가 물분자와 상호 물리적 결합으로 형성된 외관상 얼음과 비슷한 고체 포유물로 자연상태에 존재하는 하이드레이트의 주 성분이 메탄(Methane)인 경우가 대부분인 까닭에 메탄 하이드레이트라고도 불린다. 표준상태에서 $1m^3$의 메탄하이드레이트는 $172m^3$의 메탄가스와 $0.8m^3$의 물로 분해된다. 그러나 메탄 하이드레이트를 인공적으로 만들경우 물과 가스의 반응율이 낮아 하이드레이트 생성시간이 상당히 길고 가스 용해율도 낮다. 따라서 하이드레이트를 빨리 만들며 가스충진율도 증가시킬 수 있는 방법으로 가스 흡착성이 있는 탄소나노튜브(Carbon Nano Tube)를 기계적 분산방법인 초음파 분산(Dispersion)과 화학적 개질에 의한 분산방법인 산화처리분산을 사용하여 탄소나노튜브와 산화탄화나노튜브를 순수한물에 분산하여 나노유체를 만들고, 나노유체와 메탄가스를 반응시켜 메탄하이드레이트를 생성시키는 실험을 수행하였다. 나노유체와 순수한물의 상평형(Phase Equilibrium)은 비슷하였으며, 탄소나노튜브를 0.0005Vol%를 분산한 나노유체와 순수한물의 메탄가스 소모량의 비교한결과 나노유체의 가스소모량의 순수한물보다 ${\Delta}T_{sub}$=0.5K에서는 2배 ${\Delta}T_{sub}$=9.7K에서는 1.6배 증가하였다. 또한 산화나노유체와 나노유체의 메탄 가스소모량은 산화나노유체가 0.01 ~ 0.02mol정도 높았으나 그 효과가 미미하였고, 교반기를 사용하여 RPM300으로 교반시켰을 경우 역시 메탄 가스소모량은 큰 차이가 없었으나 산화나노유체의 경우 메탄 가스소모량이 나노유체보다 급격히 증가함을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.661-668
• /
• 2015

We present a design methodology for horizontal-axis tidal turbine blades based on blade element momentum theory, which has been used for aerodynamic design and power-performance analysis in the wind-energy industry. We design a 2-blade-type 1 MW HATT blade, which consists of a single airfoil (S814), and we present the detailed design parameters in this paper. Tidal turbine blades can experience cavitation problems at the blade-tip region, and this should be seriously considered during the early design stage. We perform computational fluid dynamics (CFD) simulations considering the cavitation model to predict the power performance and to investigate the flow characteristics of the blade. The maximum power coefficient is shown to be about 47 under the condition where TSR = 7, and we observed cavitation on the suction and pressure sides of the blade.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.311-320
• /
• 2003

The coefficient of consolidation of clay deposit is one of the most important properties in the design of ground improvement. The in-situ value of $c_h$ is generally estimated by pore pressure dissipation using piezocone. Many researchers have suggested theoretical formula for its estimation. This study attempts to find out the validity of the existing theoretical formula in Korea and to find out the characteristics of $c_h$ related to the mechanical properties of clay. Piezocone tests and laboratory tests were performed at the site of pilot project of ground improvement at Yangsan-Mulgeum, Gyeongnam. Comparison of the estimated values of $c_h$using piezocone tests results and those from laboratory consolidation tests are carried out. Results show that Torstensson(cylindrical cavity theory) and Teh & Houlsby solutions derive similar values of $c_h$. And $c_h$ from oedometer test shows values similar to the above two methods. The value from either of the above two methods[Torstensson(cylindrical) or Teh & Houlsby] is recommended to be used as $c_h$.