• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.2
• /
• pp.100-111
• /
• 1983

The research results reported herein had the objectives to understand and analyze the present problems of saemaeul woodland joint cattle grazing system in Kang Won Do and to take steps of improvement. The study results on actual management conditions, problems analyzed and improvement plan of total 208 joint cattle grazing area which was established 105 area in 1981 and 103 area in 1982 were summarized as follows: 1. the effectiveness of joint cattle grazing projects 1) Average daily weight gain of cattle during joint cattle grazing period was 0.4kg, showing higher daily than the conventional feeding of 0.33kg. 2) Increase of total farm income over the conventional feeding system were \1,031,357,320 during the grazing period from May to October in 1982 by adapting the 208 joint cattle grazing system, of which effectiveness of weight gain was \293,075,300 and labor saving was \543,838,750. 3) According to the results of questionaire investigation from 208 joint cattle grazing area, effectiveness of joint cattle grazing system over the conventional system were (1) labor saving, (2) feed cost saving, (3) reduced diseases, (4) increase of number of feeding, (5) inspiration of joint endeavor, (6) effect of more gain, (7) easiness of feeding and feed cost savings. 2. Problems of joint cattle grazing system. 1) Shortages of grass were a problem at second year of joint cattle grazing period due to the low regrowth rate of wild grass. 2) Proper land for woodland joint cattle grazing is belonging to land of Government ownership and it is very hard to get the permission from office of forestry for cattle grazing purpose. 3) It is also difficult to find a proper time of breeding in grazing area by the difficulty of estrus detection. 4) There are a difficulty to give a proper vaccination and medical examination for the grazing cattle. 3. Improvement plans for woodland joint cattle grazing projects. 1) Obtain sufficient roughages by hoof cultivation and oversowing pasture from the second year of joint cattle grazing period. 2) In order to increase the beef production and to use for a calf production area, Government should arrange that all proper grazing land of Government owned in Kang Won Do convert into woodland joint cattle grazing area. 3) Make a good reproductive record by mixed grazing with a excellent breeding cow in a remote area. And carry out the collective artificial insemination with synchronous puberty induced by injection of puberty stimulation hormone. 4) Make a preventive injection for blackleg, twice medication of fasciola hepatica in a year, and spray and medication of tick insecticide. 4. A policy towards upbringing of woodland joint cattle grazing area. 1) Government should thoroughly investigate about a proper land for woodland joint cattle grazing from all forests. 2) When the area is suitable for the woodland joint cattle grazing, though it is national forest or restricted area, government should make it possible to establish a grazing area. 3) On the proper land foe joint cattle grazing in the remote place, Government should support for the road construction and electric fence equipments by using of national funds. 4) There should be an administrative consideration for well promotion of the project that make woodland joint cattle grazing suitable to the characteristics of Kang Won Do. 5) In order to improve the reproduction record, Government should reform the insufficiency of artificial insemination in the joint cattle grazing area. 6) In order to maintain a proper price of cow, Government should carry out the price plan. 7) When there is any request for grassland formation in the woodland joint cattle grazing area, Government should permit it with preference.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1253-1257
• /
• 2010

그라우팅은 건설공사에서 지반의 갈라진 틈이나 공동, 공극 등에 적절한 충전재를 압력을 이용하여 주입하는 것으로, 굴착공사 시 누수방지와 불안정한 지반의 보강을 위하여 광범위하게 사용되고 있다. 가장 많이 사용되고 있는 그라우팅 주입재의 재료로는 물유리계를 주재료로 사용하는 약액주입공법이 많이 사용되어지고 있다. 기존의 물유리계 재료를 사용할 경우 발생하는 용출현상 및 강도저하를 보완하기 위하여 가소성을 부과한 무기질계 재료ECG(Eco Clean Grouting)를 사용하여, 강도 및 내구성이 우수하고 주입재의 용출 현상이 발생하지 않아 환경오염 문제가 거의 없는 영구적인 차수 및 보강에 적합한지와 친환경적 특성을 확인한다. 본 연구는 가소성 무기질계 재료인 ECG(Eco Clean Grouting)재료를 사용하여 현재 많이 사용되는 재료인 물유리계 재료로 일축압축강도, 체적변화, 내구성 평가, 투수시험, 어독성 시험, 용탈시험등을 수행하여 비교 분석 하였다. 일축압축 시험결과 재령 28일 강도는 ECG가 물유리재료에 비해 크게 발현되었고, 내화학성시험 결과 ECG의 길이변화율이 거의 없는 것으로 내화학성에서 강점을 보였다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.704-707
• /
• 2012

현재 국내 농업은 고령화로 인하여 10년간 전체 농촌인구의 3분의 1이 감소하고 있으며 농업 인구의 공동화 현상이 진행되고 있다. 농촌 인구의 인력을 해결하기 위해서 농업 선진국들은 적은 인력으로 생산성을 증대하기 위해서 자동화 시스템을 도입하고 있다. 따라서 국내 농업 생산성 증대를 위해 자동화 시스템은 필수적이며 도입으로 인하여 인력 부족 현상을 해결하고 농가 소득을 필요성이 중요시되고 있다. 따라서 진정한 무인 자동화 시스템이 가능하려면 신뢰성이 보장되면서 일반 농가에서도 부담 없이 도입 할 수 있는 저가의 시스템이 필요하다. 이러한 시스템을 필요로 하는 농가에 시스템을 구축 시 들어가는 구축비용을 줄이기 위해 저가의 센서들을 네트워크로 연결하여 안정적으로 동작하는 서버 개발이 필요하며 이러한 서버를 통하여 실시간으로 손쉽게 눈으로 확인하기 위하여 스마트폰과에 연계 기술이 필요하다. 본 연구에서는 온도, 습도, Co2등의 다양한 영농 환경 정보들을 수집하고 이를 스마트폰으로 통하여 실시간으로 확인하게 할 뿐만 아니라 원격제어를 통하여 천장계폐와 LED를 손쉽게 제어 할 수 있도록 하였다. 이렇게 설계된 시스템으로 제어뿐만 아니라 수집된 데이터를 통하여 농가 환경을 분석하기 위한 정보로써 활용 될 수 있으며 유무선 공유기를 통하여 언제 어디서든 네트워크가 연결된 곳이라면 시스템에 접근이 가능 하도록 하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.634-642
• /
• 2011

A numerical analysis of steady/unsteady flow applying cavitation model and moving mesh method was carried out in order to analyze flow and response characteristics inside the pilot valve which controls the flight actuator system. The flow of the valve was assessed according to operation temperature and time. This research has found that valve characteristics became stable at above a specific temperature and the cavitation affected valve's performance. Internal pressure and response characteristics of the valve were analyzed and flow characteristics of steady and developed unsteady flow were confirmed to be matched each other.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.1
• /
• pp.116-124
• /
• 2002

The bubble model by Keller and Prosperetti is adapted to solve the nonlinear oscillation of a gas bubble. This formulation leads to accurate results since it introduces the energy equation instead of the polytropic assumption for the bubble interior. The numerical method used in this study is stable enough to handle large amplitude of bubble oscillation. The numerical results show some interesting nonlinear phenomena fur the bubble oscillator. The excitation changes the natural frequency of the bubble and makes some harmonic resonances at $f/f_0=1/2, 1/3$ and so on. The natural frequency of a bubble oscillator decreases compared with the linear case result, which means that the nonlinear bubble oscillation system is a "softening"system. In addition, the frequency response curve jumps up or down at a certain frequency. It is also found that there exist multi-valued regions in the frequency response curve depending on the initial conditions of bubble. The dependency of the bubble motion on the initial condition can generate extremely large pressure and temperature which might be the cause of the acoustic cavitation and the sonoluminescence.inescence.

• Annual Conference of KIPS
• /
• 2001.10a
• /
• pp.155-158
• /
• 2001

QoS(Quality of Service)측면에서 멀티미디어 응용 서비스를 제공하기 위해서 멀티미디어 통신은 여러 가지 요구사항을 지원하여야 한다. 연속적으로 생성된 미디어의 시간적인 관계를 유지하면서 재생시킬 수 있는 동기화 메커니즘은 무엇보다도 중요한 문제이다. 전달되는 매체를 공동으로 사용하기 때문에 트래픽의 폭주시, 지역적으로 멀리 떨어져 있는 경우에는 지연의 현상이 발생하게된다. 본 논문에서는 지연에 의해 발생되는 지연지터에 대하여 완충역할을 할 수 있는 최소 버퍼크기를 제시하였다. 주문형멀티미디어서버(MOS)의 경우 각 미디어 별로 서버에 저장하여 서비스하는 연구가 현재 활발히 진행되고 있으며 이것은 네트워크의 부하를 줄일 수 있다는 장점을 가지고 있다. 또한 이러한 데이터의 경우 클라이언트에서 어느 정도의 지터를 예상하여 버퍼의 크기를 갖고 있어야 하는 문제는 아직도 큰 문제점으로 나타나고 있다. 본 논문은 버퍼의 크기 및 재생에 관한 동기화 시점을 조정함으로서 버퍼의 오버플로우나 언더플로우의 현상을 방지하고자 한다. 제안한 기법은 기존의 기법보다 향상된 동기화 기법임을 시뮬레이션을 통해 검증하였다.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.47-60
• /
• 2021

Recently, as the occurrence frequency of sudden floods due to climate variability increased, the damage of aging chuteway slabs of spillway are on the rise. Accordingly, a wide array of field survey, hydraulic experiment and numerical simulation have been conducted to find the cause of damage on chuteway slabs. However, these studies generally reviewed the flow characteristics and distribution of pressure on chuteway slabs. Therefore the derivation of damage on chuteway slabs was relatively insufficient in the literature. In this study, the cavitation erosion and hydraulic jacking were assumed to be the causes of damage on chuteway slabs, and the phenomena were reproduced using 3D numerical models, FLOW-3D and COMSOL Multiphysics. In addition, the cavitation index was calculated and the von Mises stress by uplift pressure distribution was compared with tensile and bending strength of concrete to evaluate the possibility of cavitation erosion and hydraulic jacking. As a result of numerical simulation on cavitation erosion and hydraulic jacking under various flow conditions with complete opening gate, the cavitation index in the downstream of spillway was less than 0.3, and the von Mises stress on concrete was 4.6 to 5.0 MPa. When von Mises stress was compared with tensile and bending strength of concrete, the fatigue failure caused by continuous pressure fluctuation occurred on chuteway slabs. Therefore, the cavitation erosion and hydraulic jacking caused by high speed flow were one of the main causes of damage to the chuteway slabs in spillway. However, this study has limitations in that the various shape conditions of damage(cavity and crack) and flow conditions were not considered and Fluid-Structure Interaction (FSI) was not simulated. If these limitations are supplemented and reviewed, it is expected to derive more efficient utilization of the maintenance plan on spillway in the future.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.262-279
• /
• 2019

In the engineering barriers of high-level radioactive waste disposal, gases could be generated through a number of processes. If the gas production rate exceeds the gas diffusion rate, the pressure of the gas increases and gases could migrate through the bentonite buffer. Because people and the environment can be exposed to radioactivity, it is very important to clarify gas migration in terms of long-term integrity of the engineered barrier system. In particular, it is necessary to identify the hydro-mechanical mechanism for the dilation flow, which is a very important gas flow phenomenon only in medium containing large amounts of clay materials such as bentonite buffer, and to develop and validate new numerical approach for the quantitative evaluation of the gas migration phenomenon. Therefore, in this study, we developed a two-phase flow model considering the mechanical damage model in order to simulate the gas migration in the engineered barrier system, and validated with 1D gas flow modelling through saturated bentonite under constant volume boundary conditions. As a result of numerical analysis, the rapid increase in pore water pressure, stress, and gas outflow could be simulated when the dilation flow was occurred.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.487-495
• /
• 2017

A granite rock body, called 'Bukbawi', located on a mountaineering trail at Mt. Palgong Provincial Park is popular among the public because it resembles a percussion instrument. If someone hits the specific surface area of this rock body, people can hear drum-like sound. Such phenomenon may be geologically associated with exfoliation process of the granite body or miarolitic cavity developed after gasses escaped during formation of granite. To understand better the inner structure causing drum-like sound, we carried out a non-destructive ground-penetrating radar survey. In this study, as our primary target is very close to the surface, we utilized 1 GHz antennas to produce high-resolution near-surface images. In order to construct 3-D internal images, the measurements were conducted along a pre-defined grid. The processed radargrams revealed that the locations associated with 'drum' sound coincide with strong reflections. In addition, both reflection patterns of fracture and cavity were observed. To further quantify the observed reflections, we simulated GPR scans from a synthetic fracture in a granite body, filled with different materials. The simulated results suggest that both exfoliation process and miarolitic cavity may have contributed to the 'drum' phenomena. Furthermore, the radargrams showed a well-developed cavity signature where two major reflection planes were crossed. Thus, our study is an example of non-destructive geophysical studies that can promote Earth Science in the broader community by examining geological structures attracting the public.

• The Korean Journal of Financial Management
• /
• v.19 no.1
• /
• pp.153-181
• /
• 2002

본 논문은 1999년 1월부터 2000년 12월까지 코스닥증권시장에 등록한 벤처기업의 IPO를 대상으로 발행시장에서 벤처캐피탈리스트의 역할을 살펴보고 있다. 특히 미국의 발행시장에서는 벤처캐피탈리스트가 투자한 기업이 조기에 공개되는 현상이 나타나는 것으로 보고되고 있는 바, 우리나라에서도 이러한 현상이 존재하는지를 실증적으로 조사하고 있다. 코스닥증권시장에 등록한 벤처기업의 IPO를 대상으로 발행시장에서 벤처캐피탈리스트의 역할에 관한 우리의 연구 결과는 다음과 같다. 첫째, 벤처기업과 비벤처기업의 초기 초과수익률의 차이분석에서, 벤처기업은 $AR_1$에서 할인 발행의 정도가 적어 Megginson-Weiss(1991)의 결과와 유사한 것으로 나타났지만, $AR_2$에서 발행가격 결정시 고려하지 못하는 비계수적 환경요인 등 미래기대수익에 대한 일반투자자의 평가가 호의적으로 나타나 발행회사의 입장에서는 할인발행의 정도가 큰 것으로 나타났다. 이는 이기환 임병균 최해술(1998), 장상수 길재욱(2000) 등의 연구와 유사한 결과를 보이고 있다. 둘째, 벤처캐피탈리스트의 명성에 따라 초기 초과수익률에 차이가 있었다. 즉, KTB지원기업의 초기 초과수익률이 낮았다. 셋째, 벤처캐피탈리스트의 보유지분을 변동에 대한 차이는 IPO전 평균보유지분율은 비KTB가 높았으나 공개 후 평균보유지분율은 KTB가 높았다. 이때 보유지분을 변동이 적은 KTB 지원기업의 초기 초과수익률이 낮았다. 특히 업력과 총자산의 규모가 할인발행을 줄이는 역할을 하는 것으로 나타났다. 업력은 Muscarella-Vetsuypens(1989)의 연구와 일치하고 있다. 넷째, 2개 이상의 벤처캐피탈리스트로부터 공동으로 투자받은 벤처기업의 초기 초과수익률이 하나의 벤처캐피탈로부터 단독으로 투자받은 벤처기업의 초기 초과수익률보다 낮았다. 그러나 통계적 유의성은 없었다. 다섯째, IPO까지 소요기간의 차이가 있는지에 대한 분석에서 비KTB지원기업이 보다 빨리 공개되고 있어 조기업적과시현상(grandstanding)을 보였다. 이는 Gompers(1996)의 연구와 일치한다. 여섯째, 등록주선인의 시장점유율에 차이가 있는지를 분석한 결과, KTB가 투자한 벤처기업 등록주선인의 평균시장점유율이 낮았다. 그러나 통계적 유의성은 없었다.