• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.4
• /
• pp.30-36
• /
• 2003

Lately, the cavitation and erosion phenomena in the rudder have been increased for high-speed container ships. However, cavitation is not prone to occur in model experiments because of low Reynolds number. In order to predict the cavitation phenomena, the - analysis of the viscous flow in the rudder gap is positively necessary In this study, numerical calculation was applied to the two-dimensional flow around the rudder gap using FLUENT code. The velocity and pressure field were numerically acquired and cavitation phenomena could be predicted. And the case that the round bar was installed in the rudder gap was analyzed. For reducing the acceleration force when fluid flow through the gap, modified rudder shape is proposed, It is shown that modified rudder shape restrain the pressure drop at the entrance of the gap highly both in the computational results and in the model experiment, and reduce the cavitation bubbles.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1989.11a
• /
• pp.1-15
• /
• 1989

바이오트라이보로지(biotribology)란 생물학(biology)와 마찰학(tribology)의 합성어로서 그리이스어의 $\tau\rhoc\betao\sigma$(마찰하다)가 어원이며, 마찰 마모 윤활의 학술 용어 "tribology"가 영어로 된것은 1966년이다. 이때 마찰학이란 이학 또는 공학현상으로서 문제를 해석하는데 한정하였고 생물에 대한 문제까지 광범위하게 고려하지 못하였다. 1972년 영국 석유학회, 기계학회 그리고 Rheology 학회의 공동개최로 "윤활제의 레올로지" 회의가 열렸다. 거기서 Dowson 교수(기계공학)와 Right 교수(루마치스 의학)의 공동논문 "Bio-Tribology"를 발표해서 처음으로 그 용어를 제안하였다. Dowson 교수가 열거했던 바이오트라이보로지의 대상은 다음과 같다. (1) 기계에 사용되는 윤활제에 대한 미생물의 영향 (2) 인간의치의 마모 (3) 면도칼에 대한 저마찰 보호막의 작용 (4) 인체내의 유체수송(뇨관내의 유동기구, 타액의 운동, 혈액흐름) (5) 모세혈관내에서 적혈구의 운동과 혈장에서 그의 윤활작용 (6) 화상치료시 "정압기체 축수"적 부양 (7) 음식물을 씹을 때 타액의 윤활작용 (8) 관절기능의 윤활학적 연구 (9) 인공골두와 인공관절의 윤활학적 연구8) 관절기능의 윤활학적 연구 (9) 인공골두와 인공관절의 윤활학적 연구

• Tribology and Lubricants
• /
• v.26 no.4
• /
• pp.209-218
• /
• 2010

In this study, the effect of dimensions and location of oil grooves on the static performance of a cylindrical journal bearing is analyzed numerically. Axial length, circumferential length and location of oil grooves are considered as parameters. Cavitation occurs within the diverging region of a journal bearing. The distribution of cavitation region where cavitation occurs varies with dimensions and location of oil grooves and affects the performance of a journal bearing. Elrod's cavitation algorithm which implements JFO boundary conditions based on the principle of mass conservation at the interfaces between cavitation and full film region is adopted in order to consider the effect of cavitation. The result shows that parameters, especially location of oil grooves have a great effect on the static performance of a journal bearing.

• Tribology and Lubricants
• /
• v.24 no.3
• /
• pp.147-153
• /
• 2008

The effect of oil supply pressure on the performance of vapor cavitated short squeeze film dampers is examined. Vapor cavitation is characterized by film rupture occurring as a result of evaporating oils. The pressure of vapor cavity in the film is almost zero in absolute pressure and nearly constant. Pan's model about the shape of vapor cavity is utilized for studying the effect of vapor cavitation on the damping capability of a short squeeze film damper. As the level of oil supply pressure is increasing, vapor cavitation is suppressed so that the direct damping coefficient increases and the cross coupled damping coefficient decreases. Futhermore, the analysis of the unbalance responses of a rigid rotor supported on cavitated squeeze film dampers shows that a significant reduction in rotor amplitude and force transmissibility is possible by controlling the oil supply pressure into short squeeze film dampers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.49-52
• /
• 1993

금속의 가공공정에 있어 중요한 인자중의 하나인 재료의 연성은 환경뿐만 아니라 주변압력에 따라 변화한다는 사실이 20세기에 들어 여러 연구자들에 의해 밝혀졌고 1950년대 Birdgman에 의해 최초로 실험적인 방법으로 증면되었다. 재료의 이와같은 현상을 압력유도연성이라 하는데 이는 주변압력이 재료 내부에서의 공동발생 및 그 성장에 관계하기 때문인 것으로 알려졌다. 공동의 합체 및 성장은 연성파괴의 전체조건이 되므로 이를 억제하면 성형성 및 연성이 증가됨을 알 수 있다. 금속의 압력 유도 연성을 이용한 가공방법을 가압금속형형이라 한다. 최근에 가압금속형의 범주는 크게늘고 있 는데 특히, 성형,블랭킹, 분말야금법 등에 널리 이용되고 있다. 정수압의 크기에 다른전단면의 상태 변화 즉, 소성 변형능에 관한 연구는 Fine-Blanking가공이론에 적용, 해석되고 있다.

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.3 s.12
• /
• pp.14-20
• /
• 2001

Numerical analysis of the three dimensional turbulent flow field in a complex valve trim is carried out to confirm the possibility whether this simulation tool can be used as a design tool or not. The simulation of the incompressible flow in a glove valve is performed by using the commercial code. CFD-ACEA utilizes the finite volume approach as a discretization scheme, and the pressure-velocity coupling is made from SIMPLEC algorithm in it. Four flow cases of the control valve are investigated, and the valve flow coefficient for each case is compared with the experimental data. Simulation results show a good agreement with the experiments, and it is observed that the cavitation model improves the simulation results.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.335-338
• /
• 2006

A Numerical study of the cavitation within a centrifugal pump is carried out using CFD commercial code, FLUENT. The objective of this study is to predict the onset of cavitation within the pump blade and the degradation in the pressure rise due to the generation and transport of vapor. A pump designed for the study is a six bladed, one-circular arc impeller design suggested by A.J. Stepanoff et al. The Steady-state calculations are performed for a wide range of flow rate without the cavitation to investigate the pump performance. The design head and efficiency show a very good agreement with the numerical results at the design flow rate. After the validation with the numerical results, the pump performance and the onset of cavitation within the blade is predicted by changing NPSH at the design flow rate.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.952-957
• /
• 2001

The objectives of this investigation were to obtain an excellent spray by cavitation under the low injection pressure. When cavitation occurs in the nozzle hole, the atomization of the liquid jet enhanced considerably. In this experiments, a acrylic nozzle made the gap and installed the bypass in the nozzle hole was used to enhance the atomization of the liquid jet at the low injection pressure. The liquid flow in the nozzle hole was photographed by a transmitted light using a micro flash. The spray angle was measured macroscope images of PMAS and the Sauter mean diameter was measured PDA system. To measure the pressure of the nozzle hole, pressure transducer was used. The results of this study indicated that enhanced atomization of the liquid jet at the low injection pressure was obtained by making the gap and installing the bypass at the single hole nozzle.

• Computational Structural Engineering
• /
• v.18 no.1 s.67
• /
• pp.45-50
• /
• 2005

원자력 발전 과정에서 부산물로 발생되는 사용후 핵연료와 같은 고준위 방사성 폐기물은 수백 만년 동안 인간 및 자연 환경에 영향을 미치기 때문에 엄격한 관리가 요구된다. 이를 위하여 세계 각국에서는 스웨덴의 고준위방사성폐기물 처분개념인 KBS-3개념과 같이 고준위 방사성폐기물을 지하 500미터 심도의 암반에 영구 처분하기 위하여 많은 연구를 수행하고 있다. 이러한 연구 활동의 일환으로 고준위 방사성폐기물에서 발생하는 방사성 붕괴열로 인한 처분장 인접 암반에서의 응력 변화 및 이에 따른 주변 암반대에서의 지하수 유동 현상 규명을 위한 연구들 가운데 전산해석분야의 연구로 가장 활발히 진행되고 있는 것이 DECOVALEX 국제 공동 연구이다. 본고에서는 그 동안 진행되었던 DECOVALEX 연구 수행내용에 대하여 살펴보고자 한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.1
• /
• pp.18-28
• /
• 2008

Fins are widely used for roll stabilization of passenger ferries and high performance naval ships, among others. In the present study, numerical simulations are performed to investigate the influence of end-plates upon the cavitation characteristics of a stabilizer fin for various angles of attack and speeds and the results are verified through a series of model experiments. It is found that a considerable retardation in tip vortex cavitation can be achieved with attachment of end-plates at the tip of the stabilizer fin. The results can be utilized for the design of stabilizer fins as well as the development of high performance control devices for ships.