• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.597-603
• /
• 2003

Air spring system in railway vehicles primarily ensure the air suspension of the vehicle body. The low natural frequency ensures a comfortable ride and an invariably good stiffness. In this paper, the characteristics and durability test was conducted in laboratory by using servo-hydraulic fatigue testing system to reliability evaluation of air spring for electric railway vehicle. The experimental results show that the characteristics and durability of domestic development productions are obtained the good results.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.31-38
• /
• 2001

This paper deals with the micro turning property of setting angle using diamond tool. The bed of the system has used the granite which has the thermal and vibrational characteristics superior to the cast iron bed for the common machine tool. To minimize the inner and outer vibration of the fuming system, an air pad system was manufactured and tested. The aero-static spindle system which has the excellent rotation accuracy was designed and manufactured. As a result of the micro-cutting test on aluminum alloy, tool setting angel have effected on surface roughness. From the results, the micro-cutting conditions hope to provide the useful actual data using in industrial fields.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.104-106
• /
• 2007

전력계통의 평상시 전류개폐, 고장구간을 신속히 차단 및 재투입하기 위해 차단기(CIRCUIT BREAKER)를 설치 운영하고 있다. 차단기를 조작방식에 따라 분류해 보면 압축공기압 조작방식과 유압 조작방식, 전동스프링 조작방식으로 크게 나눌 수 있으며 본 연구는 최근에 지속적으로 지연동작을 일으키는 압축공기 조작방식의 문제점 분석과 대책을 마련하고자 한다.

• 유공압시스템학회논문집
• /
• 제5권4호
• /
• pp.17-25
• /
• 2008

This study presents an analytical model of the pneumatic circuit of an air suspension system to analyze the characteristics of vehicle height control. The analytical model was developed through the co-simulation of Simulink(air spring) and HyPneu(pneumatic circuit). Variant effective area of air spring and flow coefficients of pneumatic valves were estimated experimentally prior to the system test, and utilized in simulation. One-comer test apparatus was established using the components of commercial air suspension products. The results of simulation and experiment were so close that the proposed analytical model in this study was validated. However the frictional loss of conduit and heat dissipation which were ignored in this study need to be considered in future study. As an application example of proposed analytical model, an alternative pneumatic circuit of air suspension to conventional WABCO circuit was evaluated. The comparison of simulation results of WABCO circuit and alternative circuit show that proposed analytical model of co-simulation in this study is useful for the study of pneumatic system of automotive air suspension.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.357-362
• /
• 2011

Air springs are prevalently used as suspension in train. However, air springs are seldom used in automobiles where they improve stability and comfort by enhancing the impact-relief, breaking, and cornering performance. Thus, this study proposed a new method to analyze air springs and obtained some reliable design parameter which can be utilized in vehicle suspension system in contrast to conventional method. Among air spring types of suspension, this study focused on sleeve type of air spring as an analysis model since it has potential for ameliorating the quality of automobiles, specifically in its stability and comfort improvement by decreasing the shock through rubber sleeve. As a methodology, this study used MARC, as a nonlinear finite element analysis program, in order to find out maximum stress and maximum strain depending on reinforcement cord's angle variation in sleeves. The properties were found through uniaxial tension and pure shear test, and they were developed using Ogden Foam which is an input program of MARC. As a result, the internal maximum stresses and deformation according to the changes of cord angle are obtained. Also, the results showed that the Young's modulus becomes smaller, then maximum stresses decrease. It is believed that these studies can be contributed in automobile suspension system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.97-103
• /
• 2002

Vibration isolation technology using an air spring and laminated rubber bearing is widely used because it has excellent vibration isolation characteristics. In the part of that, we usually make use of the self-damped air suing. It is occupied two chambers, restrictor, diaphragm and load plate. Two chambers contain compressed air and the volume of chambers and the area of load plate give a definition of stiffness and load. The restrictor and the volume ratio of two chambers give a definition of damping ratio. The conventional model of restrictor is made of one orifice and it causes turbulent flow in the orifice at the region of large deflection. The stillness of air suing is larger and the damping is lower in the region of large deflection. In the multi-orifice case, the stiffness is similar to air spring with one orifice but damping ratio is larger than conventional air spring. And damping ratio is smaller than conventional air suing in small deflection region. Deflection is small in the region of high frequency so small damping is better than large damping. As a result, we can reduce the storage stiffness of air suing in the wide region of deflection and increase the damping ratio in the region of large deflection. After this, we will try to and the relation of Reynolds Number and Flow Resistance then we are going to make another restrictor for air spring to improve damping ratio and stiffness.

• 한국항공우주학회지
• /
• 제30권7호
• /
• pp.29-35
• /
• 2002

접는 미사일 조종날개의 공력탄성학적 특성을 조사하였다. 접는 미사일 조종날개는 2차원 익형 모델로 가정하였다. 초음속 DPM을 이용하여 초음속 비정상 공기력을 계산하였으며, 최소 상태 변수 근사법을 이용하여 비정상 공기력을 근사화하였다. 선형 및 비선형 플러터 해석을 위해 근궤적법과 시간적분법을 사용하였다. 비선형 플러터 해석을 위해 전개부의 힌지는 비대칭 이선형 스프링으로 가정하였으며, 기술함수를 이용하여 선형화하였다. 플러터 해석으로부터, 비선형 파라미터가 공력탄성학적 특성에 미치는 영향을 조사하였다.

• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.617-623
• /
• 2020

다수의 승객을 운송하는 도시철도 전동차는 도시 철도교통시스템의 핵심이다. 따라서 차량의 동적성능이 확보가 차량 안전 확보 및 승객서비스 차원에서 선행되어야 한다. 철도차량의 진동, 승차감과 같은 동적거동은 현가시스템 구조 및 현가요소에 따라 크게 영향을 받는다. 철도차량의 현가시스템은 윤축과 대차간 1차현가시스템, 대차와 차체간 2차현가시스템으로 구성되어 있다. 본 논문에서는 국내에서 운용되고 있는 전동차 현가구조에 따른 전동차의 동적거동에 대하여 분석하고자 한다. 현가구조가 상이한 2종류의 전동차에 대하여 실제 선로에서 동일 주행조건으로 주행시험을 수행하였으며 차량의 진동을 계측하였고 진동과 승차감, 진동감쇠율과 같은 동적거동 특성을 분석하였다. 시험결과, 차체 진동성능은 좌우방향은 B대차가, 상하방향은 A대차가 상대적으로 우수하게 나타났다. 승차감은 전반적으로 A대차가 B대차에 비하여 우수하게 나타났다. 진동감쇠율을 보면, 1차현가시스템은 고무스프링이 적용된 A대차에 비하여 코일스프링이 적용된 B대차의 진동감쇠 성능이 우수하며 2차현가시스템은 코일스프링에 비하여 공기스프링이 적용된 A대차의 진동감쇠 성능이 우수하다. 본 논문의 결과는 향후 철도차량 신차 설계 과정에서 현가구조 설계 및 현가요소 선정 시, 유용한 자료로 활용될 것이라 기대된다.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.26-36
• /
• 2013

Purpose of this study is to develop virtual components and environment for developing a controller of an Active Air Suspension System in laboratory that slough off existing development environment using real vehicle test. This paper presents an air spring modeling and analysis of air suspension system for a commercial vehicle. Preferentially, It was performed vehicle test for pneumatic system and an air spring for characteristic analysis of system. Each component of an air spring suspension system was developed through emulations and modeling of system for pressure and height sensors in the basis on test results in SILS environment. Non-linear characteristics of air spring are accounted for using the measured data. Also, pressure and volume relations for vehicle hight control is considered. After performance verification of virtual model was performed, we developed virtual environment based on HILS for an Active Air Suspension System. We studied estimation and verification technology for control algorithm that developed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.299-304
• /
• 2009

A hybrid electromagnetic actuator with an air spring is designed so as to achieve the desired isolation reduce the vibration efficiency on the floor vibration. The performance specification of the hybrid electromagnetic actuator is determined based on the vibration criterion for vibration-sensitive equipment. In basic design stage of the electromagnetic actuator, the simple reluctance method is adapted to analyze magnetic circuits. The result is verified by finite element analysis using ANSYS Emag. Finally, some design parameters are optimized under several constraint conditions. Through this study, the design procedure for a specific electromagnetic actuator is set up using a simple reluctance method.