• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2008.04a
• /
• pp.179-186
• /
• 2008

현재 대부분의 산업용 열기관은 효율을 높이기 위하여 연소에 사용되는 공기를 예열하는 방법을 사용한다. 하지만, 산업용 열기관에서 평균적으로 발생되는 $1000^{\circ}C$ 이상의 배기가스는 일반 금속 열교환기에는 적합하지 않다. 이에 반해 세라믹 열교환기의 경우 고온에서 견디는 장점이 있다. 본 연구에서는 기본적인 열교환기 설계 이론을 이용하여 설계프로그램을 제작하였다. 또한 세라믹 열교환기 내 열 유체 거동을 CFD 상용코드인 FlUENT 6.2를 이용한 전산해석을 수행하여 설계결과를 비교 검증하였다. 설계 결과에서 휜의 형태 변화에 따라 열전달율과 온도구배는 무시할 수 있을 정도로 작았으나, 압력강하는 크게 변동되는 결과가 도출되었다. 제한된 모듈 크기에서 휜 간거리는 휜의 두께에 비해 약 3배 이상 클 경우가 적당하며, 판(plate)의 두께는 작을수록 압력손실이 적고, 열전달율이 상승하지만 두께가 너무 얇게 된다면 제작상의 어려움이 생긴다. 향후 연구에서는 단순한 구조에서 벗어나 off-set이나 판형구조를 고려하여 설계함으로서 열전달 면적을 넓히거나 난류유동을 발생시켜 열전달율을 높이는 연구를 진행 할 필요가 있다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.21-24
• /
• 2006

대부분의 사무용 건물은 코아 부분(엘리베이터 홀, 화장실, 계단 등)을 제외하고는 Open 되어 있으며, 필요에 따라 부서간에는 천장 면까지 도달하는 경량벽체를 설치하여 독립된 공간을 구획하고, 부서내부에서는 직원들간의 커뮤니케이션은 용이하게 하는 대신에 최소한의 독립성을 제공하기 위해 낮은 칸막이 등을 설치하고 있다. 그러나 사무실에 사용하는 칸막이 벽체 중 천장 면까지 도달하는 칸막이에 대해서는 KS F 2808(건물 부재의 공기전달음 차단성능 실험실 측정방법)의 측정방법을 이용하여 차음성능을 확인할 수 있으나 낮은 칸막이에 대해서는 소음저감 성능을 측정할 수 있는 측정 방법에 관한 규격이 없다. 따라서 기존에 있는 모든 KS 규격들은 국제표준규격인 ISO와의 부합화가 이루어졌거나 이루어지고 있기 때문에 이러한 정부의 방침에 따라 본 낮은 칸막이에 대한 소음감쇠량 측정규격 또한 ISO규격(ISO 10053(음향- 실험실 조건에서의 사무실 스크린의 소음저감성능 측정방법))을 받아들이기 위해 ISO규격 내용을 검토하였다. 향후 이 규격이 그대로 우리나라 규격으로 제정될 때 나탈 수 있는 문제점을 최소화하기 위해 국내에 있는 반 무향실에서 낮은 칸막이의 실제 소음저감 성능을 실시할 계획이다.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.310
• /
• pp.67-72
• /
• 2002

미쓰비시(삼릉)전기 플랜트건설총괄부의 전력플랜트 건설공사는 수력$\cdot$화력플랜트 및 변전설비를 대상으로 하고 있으며, 수차$\cdot$수차발전기$\cdot$가스절연개폐장치(이하 ''GIS''라 한다), 변압기, 배전반 및 관련 제어기기 등의 설치 및 기기간의 배선공사 설계$\cdot$시공을 담당하고 있다. 최근의 전력플랜트를 둘러싼 일본의 시장환경은 신설 플랜트는 감소하고 갱신$\cdot$기기개수(개조, 수선) 공사의 비율이 커지고 있으며, 신설$\cdot$개보수 공사를 불문하고 공사품질의 유지와 공사비 저감을 위한 공법$\cdot$작업의 개선과 설계$\cdot$계획 업무의 합리화를 추진하여 왔다. (1) 기자재 개발에 의한 공법$\cdot$작업 개선 대형수력발전기의 로터조립용 다브테일키 박아놓기(타입)장치, 스테이터코일 분해(갱신)용 코일 엔드절단 및 코일뽑기공구, 터빈발전기 센터링용 유압잭, GIS 설치용 작업용발판을 개발하여 적용함으로써 공법 개선과 작업효율의 향상을 실현하였다. (2) 공사계획 방법의 개선 변전플랜트에서의 공기단축을 목적으로 하는 현지 설치 최적공정 책정방법의 개발$\cdot$적용, 또한 화력플랜트에서의 공사물량의 저감과 설계작업의 효율 향상을 목적으로 하는 케이블 배선 설계$\cdot$계획 방법의 개발 및 적용으로 설계업무의 개선, 공사비 저감을 도모하였다.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.257-261
• /
• 2011

We introduce a novel method that could modify neat asphalt. A polymer-forming monomer, dimethylphenol( DMP) was added to the neat asphalt and polymerization was occurred autonomously, without adding any external catalyst for the polymerization, only with oxygen molecules in the air. The polymer produced in the asphalt was polyphenyleneoxide( PPO) and it enhanced the mechanical properties of the asphalt. Compared with the neat asphalt, the tenacity and toughness of the DMP-modified asphalt were two and half times and three times high, respectively.

• Journal of Aerospace System Engineering
• /
• v.11 no.1
• /
• pp.8-13
• /
• 2017

This study was performed to evaluate the turbine performance of a turbopump in the third stage engine of the Korea Space Launch Vehicle-II. The turbine is a supersonic impulse type with a single rotor. One nozzle is for starting and four remaining nozzles are for steady operation. A similarity test was carried out in the high air test facilities at the Korea Aerospace Research Institute. Test results showed that turbine efficiency changed much more from rotational speed variations than by pressure ratio variations. These results showed characteristics similar to other supersonic impulse turbines.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.5 s.21
• /
• pp.84-92
• /
• 2004

Construction work varies with the project types. However, the success of all project types depends upon three conditions i.e. schedule, quality and cost. If these three conditions are fulfilled, then project said to be successful. In this paper, scheduling of a construction Project has been dealt with the application of CCPM method. CCPM has been introduced as a new theory in construction industry in 1997 at the United States, but its application is still insufficient in domestic field due to the absence of systematic study, A simulation has been conducted in a Bridge construction project to validate the possibility of CCPM in order to complement PERT/CPM in construction field. The result of study shows that the CCPM could be effective to reduce the project time duration than existing PERT/CPM technique.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.353-360
• /
• 2017

In this study, the design and performance test of the air to water heat pump capable of producing hot water for greenhouse heating by using the surplus solar heat inside the greenhouse and the air heat outside greenhouse as the selective heat source were conducted. The heat storage operations using the surplus solar heat and the outside air heat were designed to be switched according to the setting temperature of the greenhouse in consideration of the optimum temperature range of the crop. In the developed system, it was possible to automatically control the switching of heat storage operation, heating and ventilation by setting 12 reference temperatures on the control panel. In the selective heat storage operation with the surplus solar heat and outside air heat, the temperature of thermal storage tank was controlled variably from $35^{\circ}C$ to $52^{\circ}C$ according to the heat storage rate and heating load. The heat storage operation times using the surplus solar heat and outside air heat were 23.1% and 30.7% of the experimental time respectively and the heat pump pause time was 46.2%. COP(coefficient of performance) of the heat pump of the heat storage operation using the surplus solar heat and outside air heat were 3.83 and 2.77 respectively and was 3.24 for whole selective heat storage operation. For the comparative experiment, the heat storage operation using the outside air heat only was performed under the condition that the temperature of the thermal storage tank was controlled constantly from 50 to $52^{\circ}C$, and COP was analyzed to be 2.33. As a result, it was confirmed that the COP of the heat storage operation using the surplus solar heat and outside air heat as selective heat source and the variable temperature control of the thermal storage tank was 39% higher than that of the general heat storage operation using the outside air heat only and the constant temperature control of the thermal storage tank.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2004

A field-scale(8.6${\times}$2.5${\times}$2.4 m) and pilot-scale(1.39${\times}$0.89${\times}$0.89 m) thermophilic aerobic oxidation (TAO) units were installed to investigate the volume reduction efficiency of slurry, by varying the aeration and treatment temperature of swine manure, and the collected liquid was evaluated as a liquid fertilizer. In the field-scale unit, the aeration level and numbers of foam breakers made different effects on the slurry volume and temperature in the TAO system. The experiments were peformed for three cases, using different levels of aeration and numbers of foam breakers: Treat-A (aeration rate; 120 ㎥ air/hr using 2 air pumps and 2 foam breakers), Treat-B (aeration rate; 180 ㎥ air/hr using 3 air pumps and 3 foam breakers) and Treat-C (aeration rate; 180 ㎥ air/hr using 3 air pumps and 4 foam breakers). With the same input volume (5 ㎥/day) of swine manure slurry, the resulting liquid levels, temperatures and evaporation rates were 50∼100 cm, 31∼$64^{\circ}C$ and 55 $\ell/m^2$/day for Treat-A; 40∼90 cm, 29∼$52^{\circ}C$ and 75 $\ell/m^2$/day for Treat-B; and 40∼70 cm, 45∼$54^{\circ}C$ and 120.0 $\ell/m^2$/day for Treat-C. In the pilot-scale unit, semi-continuous flow of swine manure slurry was introduced. 50 $\ell$ every 2hr(T-1), 50 $\ell$ every 3hr(T-2), 40 $\ell$ every 2hr (T-3) and 60 $\ell$ every 4hr (T-4) within 24 hours, in order to find the maximum slurry volume reduction conditions.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.87-93
• /
• 2014

A tightened coupler with two way-threading is suggested to overcome the previous one-way threaded coupler. The experiment and a mock-up test were conducted to analyze the constructability of the suggested coupler. The aim of the mock-up test was to assemble the suggested coupler in horizontal rebar of mat footing and vertical rebar of semi-fabricated column bars. The method using the suggested coupler in semi-fabricated column bars is developed by analyzing the problem of fabricated column bars using the one-way threaded coupler. The result of the mock-up test showed that the time required to assemble the suggested coupler in the horizontal bars is shorter than it is for the one-way threaded coupler. In addition, the method using the suggested coupler in semi-fabricated column bars has advantages such as lower working loads, supporting safe work and strongly tightening the rebar. From these results, it is revealed that the suggested coupler is adequate to use in rebar work in terms of cost, quality and time.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.703-714
• /
• 2011

The purpose of this study was to investigate the effect of STS modules reflecting Ansan's geological characteristics in Chemistry I on high school students' science related attitudes and preference for STS lessons. The subjects were 10th grade students from K High School in Ansan and comprised 71 students in the experiment group and 78 students in the control group from 2 classes each. Pretest-posttest control group design was employed for the purpose of research. Four STS modules with lesson plans and teaching materials with themes of water, air, and energy, all of which are closely related to high school Chemistry I were developed and applied to the experiment group. The science related attitudes and preference for STS lessons were then examined in pre- and post-tests. The science related attitudes of the experiment group were significantly high in three out of five domains compared to the control group who was taught traditionally. The preference for STS lessons of the experiment group were highly positive in all five areas and were particularly high in the area of 'relation to society'. Such results imply that in order to make effective high school Chemistry I curriculum units related to STS, emphasized by both the 7th National Curriculum and the Revised 7th National Curriculum, it is necessary to use episodes reflecting local characteristics in which students show greater interest and active participation.