• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.313-314
• /
• 2010

This study investigates properties of concrete corresponding to various high early strength agents. It was presented as reference data for reducing construction cost and improving quality of cold weather concrete through reduction of construction time.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.42-45
• /
• 2001

최근 기능 및 기술인력의 부족과 인건비 상승에 따른 공사비 증가에 능동적인 대처, 건설공사의 품질향상, 공기단축 등을 위하여 각종 건설공사 부분에서 합리화, 기계화가 활발히 진행되고 있다. 그러나 이러한 것들을 적용하기 위하여 개발된 신기술 혹은 신공법에 대한 건설기술자의 미숙지, 부적절한 시공, 무리한 적용 등의 다양한 원인이 결부되어 콘크리트구조물에서 균열발생이 발생되는 경우가 종종 발생되고 있다.(중략)

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.13-24
• /
• 2012

In this study, the in-situ model test has been conducted and used to estimate and analyze consolidation behavior of the ground by using the miniature test that reconstructs economically geotechnical behavior of in-situ full scale structure. To analogize the relation among effective stress, void ratio and coefficient of permeability at the self-weight consolidation stage, the low stress seepage consolidation test has been conducted and the involution function of constitutive equation had been obtained from the result of the curve fitted seepage consolidation test result. As a result of the numerical analysis that had been conducted on the representative section using a constitute equation, final settlement was similar with those of self-weight consolidation of the centrifugal model test. But, it was more or less smaller. It seems that these trends are caused by the difference between estimated values.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.20-20
• /
• 1994

오일폐액처리에 있어서 한외여과막을 이용하는 기술은 이미 산업분야에서 성공적으로 적용되고 있다. 그러나 오일폐액처리에 있어서 농도분극 및 겔층 (Gal layer) 형성에 의한 플럭스 감소와 막의 수명 단축은 해결해야할 중요한 숙제로 남아있다. 이와같은 문제제기로부터 본 연구에서는 한외여과막에 의한 오일처리에서 공기를 유입함으로써 플럭스를 향상시켰고, 긍극적으로 막에 의한 수용성 오일 처리 기술의 경제적 효율을 높이는 방법을 연구하였다. 수용성 오일의 막 분리는 일반적으로 농도에 따른 플럭스의 변화가 Gel Polarization Model을 따르는 것으로 보고 있다. 즉 오일의 농도가 농축됨에 따라 플럭스가 급격히 감소하여 어느 농도이상 농축시키기 위해서는 비경제적인 운영을 해야만 한다. 본 연구에서는 플럭스를 향상시키기 위해 오일 용액내로 공기를 유입시켰다. 절삭유 용액속에는 에멀젼을 안정화 시키기 위한 계면활성제가 포함되어 있어 공기를 유입할 경우 용액의 상이 액체에서 거품과 액체와의 혼합상으로 변하게 된다. 이러한 상의 변화로 인해 농도에 따른 플럭스가 Gel Polarization Model을 따르지 않고 농도에 따른 감소가 현저히 둔화됨을 관찰하였다.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.237-245
• /
• 2010

Recently, deflection of the slab during construction periods becoming one of the important issues because of increasing the large-span structures. Early removing the form and support of the slab to achieve the rapid construction cause falling-off in quality of the structures. To reduce these deterioration and make rapid construction, construction of strength and stiffness gain model is needed by the research about the early-age concrete properties. Previous research results indicated that concrete model in existing design codes could not provide the mechanical properties of early age concrete. This paper carried out the concrete compressive strength tests on the curing age at early age stage. Evaluation of the accuracy of compressive strength and modulus of elasticity gain formula in existing various design codes was performed based on this test results, and new design model was proposed. This new model will be useful to develop the new rapid construction methods or prevent the deterioration of the deflection at construction periods. Material tests were performed at 1, 3, 7, 14, 28 curing days, total 159 cylinder style specimens were tested. Based on analyzing the test results, the relationship between compressive strength and modulus of elasticity at early age was proposed.

• KIEAE Journal
• /
• v.7 no.2
• /
• pp.39-46
• /
• 2007

A high-rise building construction in Korea has some problems in engineering, construction and management technologies although the high-rise building construction is recently booming. In addition, the lack of skilled construction labors is increasing, so the development for methods is needed to reduce the labors by prefabrication and mechanization. A re-bar work is one of very important works with regard to cost and schedule management in the high-rise building construction. Nevertheless, the re-bar work has some problems that it is needed many re-bars for joints linking and much time for lifting due to high-rise buildings, and it is difficult to level the skill of labors. So, in this study, the pre-fabrication of three-story height in column re-bars is proposed and the results of an implementation are analyzed and explored by a case study. As the results of case study, the pre-fabrication of three-story heights in column re-bars could reduce the cost in the re-bar work and accelerate the time in the structural frame work. In addition, the pre-fabrication of three-story height in column re-bars could solve the problems such as the waste of many re-bars for joints linking, and the lack of the skilled labors.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.430-433
• /
• 2003

Cost, schedule, quality are the essential parts of success of every construction project. It is especially true in high-rise building construction. Among the construction components in high-rise building construction, curtain walls are very important elements for the project success because they take large portion of cost and schedule. However, curtain wall construction process are very complicated, where many entities including designers, suppliers, contractors and even maintenance contractors are involved. Therefore, control and management of their relationships and production process are critical. It is suggested that this can be solved by the concept of Supply Chain Management which is supported by the automated information technology with Radio Frequency Identification. Such concept is defined as 'Automated Life-Cycle Management System Based On SCM' and this study suggests rode map to establish the system.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.305-314
• /
• 2014

The technology-intensive unit modular method of factory production method is attracting attention by the limit of the labor-intensive and field centered wet construction method. In recent years, the unit modular method has been applied to the construction of schoolhouse and BOQ(bachelor offices' quarters), dormitories, etc. But the modular method still is not used in housing construction by the lack of verification of resident performance and construction cost. Therefore, this study analyzed the economics of modular house to vitalize the constructed residential building by modular method and to develop the modular method. According to the study results, the construction cost of the modular house was analysed more about 6.2% expensive than that of the existing housing. However, if the construction duration of modular house is shortened or the productivity of modular house is increased, the construction cost of modular house will be similar to the that of the existing house.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.5
• /
• pp.119-131
• /
• 2007

Design build (DB) is a construction project delivery system which has become one of the favored ones and the growth of DB by the public agencies has been steadily increasing. DB can be viewed as an evolutionary project delivery system, since DB project team members collaborate on work with each other, keep seeking cost effective and innovative alternatives that meet the construction needs of the project. Thus DB outperformed others in delivery speed, cost saving, and turnover quality. In Korea, DB projects likewise have steadily increased that it is needed to analyze characteristics of DB delivery system in Korea. For that purpose, this research would offer an analysis of characteristics of DB delivery system in Korea using system dynamics model with investigating the public market trend, comparing DB performance to DBB, and analyzing questionnaire survey.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.753-756
• /
• 2008

Recently, construction work period reduction is a very important topic of construction business circles. Because that is just big cost reduction. There is an important part of construction to decide the removal time of form. For prediction strength for removal form, P type schmidt hammer method and maturity method is used that. In case early strength prediction of maturity method, that is problem. Because setting duration of concrete is not proper considering. So this experimental study is a coefficient(A) of maturity method.