• Tuberculosis and Respiratory Diseases
• /
• v.64 no.3
• /
• pp.210-214
• /
• 2008

Chemical pneumonitis is an occupational lung disease that's caused by the inhalation of chemical substances. Its severity depends on the characteristics of the substances, the exposure time and the susceptibility of the patients. Hydrogen sulfide is not only emitted naturally, but it also frequently found in industrial settings where it is either used as a reactant or it is a by-product of manufacturing or industrial processes. Inhalation of hydrogen sulfide causes various respiratory reactions from cough to acute respiratory failure, depending on the severity. Two pharmaceutical factory workers were admitted after being rescued from a waste water disposal site that contained hydrogen sulfide. In spite that they recovered their consciousness, they had excessive cough and mild dyspnea. The simple chest radiographs and high resolution computed tomography showed diffuse interstitial infiltrates, and hypoxemia was present. They were diagnosed as suffering from chemical pneumonitis caused by hydrogen sulfide. After conservative management that included oxygen therapy, their symptoms, hypoxemia and radiographic abnormalities were improved.

• Korean Journal of Plant Resources
• /
• v.25 no.1
• /
• pp.156-168
• /
• 2012

Chrysanthemum is a cut flower species that normally lasts for 1 to 2 weeks, in some cases 3-4 weeks. This has been attributed to low ethylene production during senescence. Reduction in cut flower quality has been attributed to the formation of air embolisms that partially or completely blocks the water transport from the vase solution to the rest of the cut flower stem, increasing hydraulic resistance which may cause severe water stress, yellowing, wilting of leaf, and chlorophyll degradation. Standard type chrysanthemum can be harvested when buds were still tightly closed and then fully opened with the simple bud-opening solution. Standard type chrysanthemum can also be harvested when the minimum size of the inflorescence is about 5-6 cm bud which opened into the first flower full-sized flower. While spray varieties can be harvested when 2-4 most mature flowers have opened (40% opening). Cut flowers are sorted by stem length, weight, condition, and so on. Standard chrysanthemum is 80 cm length for standard type and 70cm for spray type. Pre-treatment with a STS, plant regulator such as GA, BA, 1-MCP, chrysal, germicide, and sucrose, significantly improved the vase life and quality of cut flowers. It is well established that vase solutions containing sugar can improve the vase life of cut chrysanthemum. Chrysanthemum is normally packed in standard horizontal fiberboard boxes. Chrysanthemum should normally be stored at $5{\sim}7^{\circ}C$. Precooling resulted in reduction in respiration, decomposition, and transpiration activities as well as decoloration retardation. There was significant difference between "wet" storage in 3 weeks and "dry" storage in 2 weeks. In separate pulsing solution trials, various germicides were tested, as well as PGRs to maintain the green color of leaves and turgidity. Prolonging vase life was attained with the application of optimal solution such as HQS, $AgNO_3$, GA, BA and sucrose. This also retarded senescence in leaves of cut flower stems. Fresh cut chrysanthemum can be transported using a refrigerated van with $5{\sim}7^{\circ}C$. Increasing consumption and usage of cut chrysanthemum of various cultivars would require efficient transport system, and effective information exchange among producer, wholesaler, and consumer.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.143-150
• /
• 2012

A simulation methodology and corresponding program based on it is to be discussed for analyzing the effects of the networking operation of existing DHC system in connection with CHP system on-site. The practical simulation for arbitrary areas with various building compositions is carried out for the analysis of operational features in both systems, and the various aspects of thermal energy grids with connecting operation are highlighted through the detailed assessment of predicted results. The intrinsic operational features of CHP prime movers, gas engine, gas turbine etc., are effectively implemented by realizing the performance data, i.e. actual operation efficiency in the full and part loads range. For the sake of simplicity, a simple mathematical correlation model is proposed for simulating various aspects of change effectively on the existing DHC system side due to the connecting operation, instead of performing cycle simulations separately. The empirical correlations are developed using the hourly based annual operation data for a branch of the Korean District Heating Corporation (KDHC) and are implicit in relation between main operation parameters such as fuel consumption by use, heat and power production. In the simulation, a variety of system configurations are able to be considered according to any combination of the probable CHP prime-movers, absorption or turbo type cooling chillers of every kind and capacity. From the analysis of the thermal network operation simulations, it is found that the newly proposed methodology of mathematical correlation for modelling of the existing DHC system functions effectively in reflecting the operational variations due to thermal energy grids with connecting operation. The effects of intrinsic features of CHP prime-movers, e.g. the different ratio of heat and power production, various combinations of different types of chillers (i.e. absorption and turbo types) on the overall system operation are discussed in detail with the consideration of operation schemes and corresponding simulation algorithms.

• Journal of the Korean association of regional geographers
• /
• v.7 no.3
• /
• pp.74-90
• /
• 2001

Serious depopulation has occurred since the rapid economic growth after $1965{\sim}1995$. As a result, nowadays most of mountain villages face difficulty in maintaining and managing their settlement, because of the elderly population and the extremely small size of the settlement. Population change is understood as the origin of depopulation problems and the criterion for the depopulation. This study aims to identify the problems of over-depopulation in rural Korea and to classify the patterns and process of follow and to provide policy alternatives. It consists with the three parts : identifying the problems of over- depopulation, classifying the socio-economic factors of fallow land, analyzing a detailed case study of follow land in over-depopulation rural area-Sangju Gun and to provide policy alternatives. The results are summarizes as follows: 1) In the study area, the amount of fallow and abandoned cultivated land has increased since 1975. With the increased urbanization, the cause of the increase in fallow and abandoned cultivated-land is the labor shortage of quantity and quality. The underlying reasons for the abandonment of farmland are poor field conditions and the lack of rented farmland. 2) The secondary cause is a relative labor shortage through specialization into intensive horticulture. In the study area, specialization into pear requires intensive labor input. It has caused a relative labor shortage. 3) The third causes are landowner and the lack of rented farmland due to labor shortage. The declining of agriculture and forestry have caused out-migration and increased non-residents' landowner. 4) The fallow patterns are devided into two types the less favored farmland fallow type, non-residents' landowner(out-migrator) fallow type. The significant causes of the increase in fallow and abandoned cultivated land are the labor shortage, intensive farming, less favored farmland conditions, non-residents' landowner. The factors which caused the follow processes in Korea are socio-economic factors (labor shortage, intensive farming, less favored farmland conditions) and cultural factor(non-residents' landowner, psychological ties between rural areas and urban areas).

• Journal of Chest Surgery
• /
• v.34 no.6
• /
• pp.485-489
• /
• 2001

Background: The most important factor in preventing sternal complications is stable sternal approximation. We have tried to find the most effective sternal closure method by examining the incidence of sternal dehiscence with or without infection in patients with cardiac surgery through median sternotomy. Material and Method: This study was performed in 489 patients over 45 years of age with median sternotomy for open cardiac surgery. Simple closure with interrupted 6 wires was performed in 159 patients, figure-of-8 closure technique in 119, overlapping interrupted closure using 10 wires in 150, and combined closure technique of interrupted simple closure and figure-of-8 suture closure in 61. Two hundred thirty-four patients underwent valve and aortic operations and 213 patients coronary artery bypass surgery. Result: Sternal dehiscence with or without infection occurred in 12 (2.5 %) patients. The complication developed in 5 of 159 patients (3.1%) with six interrupted simple closure, in 4 of 119 patients (3.4%) with figure-of-8 closure, and in 3 of 150 patients (2.0%) with overlapping interrupted closure using 10 wires, but there was no complication in 61 patients with combined closure technique (relative risk for other closure techniques, p<0.05). There was no significant difference in the incidence of the sternal complication between valve and aortic operation group and coronary artery bypass group (3.0% vs 2.3%, not significant), but diabetes mellitus was a significant independent risk factor (odds ratio and multivariate analysis, p<0.05). Conclusion: The sternal closure technique that combines simple interrupted suture closure and figure-of-8 suture closure may be a more useful technique to enhance sternal stabilization compared to other closure techniques, such as simple interrupted closure, 8-figure closure, and overlapping interrupted closure.

• Journal of Distribution Science
• /
• v.8 no.1
• /
• pp.21-33
• /
• 2010

The ICT(information & communication technology) led to a dramatic change of floral distribution service, a phase of competition between wholesales and retail stores, and distribution channels in floral industry. It was expected that a role of the intermediaries in this industry would have reduced due to the improvement of transaction process by ICT. However, the ICT made to overcome a regional limit of the floral retail distribution service leading to an increase in sales and enlargement of the stores. And even it made possible to bring out another type of intermediaries such as private associations. This case study focuses on what kinds of efforts the floral wholesale distributors have made to enable a distribution process more smoothly between the wholesale distributors and retail stores through the information system, and what the failure factors in adopting the information system have been. This paper is also to examine how the wholesale distributors have changed themselves to gain dominant positions in distribution channels. As a result of the study, it was found that the intermediaries mostly failed in successfully achieving the distribution channel innovation through the information system because of several main reasons. FLOMARKET Inc. tried to innovate a distribution channel to obtain high quality goods through consolidating a wholesale distribution market in that segregated both floral joint market from free markets. after implementing the information system with consideration of the failure factors, FLOMARKET Inc. was able to minimize goods in stock and make a major purchase of various goods. In addition, it made a possible pre-ordering process and an exact calculation of purchasing goods so they could provide their products with market price in real time, which helped for the company to gain credits from their customers. Also, FLOMARKET Inc. established the information system which well suited to its business stage in order to deal with a rapidly changing distribution environment. It's so obvious that the transaction processing system of FLOMARKET Inc. definitely helped to share information among traders more seamlessly and smoothly in realtime, standardize goods, and make a transaction process clearer. Besides, the transaction information helped the wholesale distributors and retail stores to make more strategic decisions in their business because through the system they enabled to gather the marketing intelligence information more easily and convenient. If we understand that the floral distribution market is characterized by the low IT- based industry, it's worth to examine a case study proving that the information system actually increases the productivity of the transaction process in the floral industry.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.36-44
• /
• 2000

Fly ash was composed of the unburned carbon and mineral particles. The former was able to attach on the bubbles, while the latter was not. Therefore, it was possible to separate the unburned carbon and the mineral from fly ash using the froth flotation process. This study was carried out to evaluate the separation efficiency as a function of the ny ash particle properties in the column flotation. Separation efficiency was analyzed for various size fraction of -38 fm,38~125 fm and 1125 W, and for various fly ash samples containing 7, 11, and 20 wt% unburned carbon. For the size fractions of -38 fm containing 7 wt% unburned carbon, separation efficiency was 86ft, whereas separation efficiency was found to be 74% for the size fraction of +125$\mu\textrm{m}$ containing 20 wt% unburned carbon. The results indicated that separation efficiency increased with the decrease in the particle size and the unburned carbon content of the fly ash.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.1
• /
• pp.66-75
• /
• 2015

This study investigated eating behaviors (life-style, breakfast pattern, eating environment, snack pattern, and awareness of breakfast) by breakfast frequency (0~2 times, 3~6 times, and 7 times per week) of high school students (146 males and 165 females) in the Yongin region. The percentage of 'mother' as breakfast preparer increased with elevated breakfast frequency, whereas 'myself' was lower for females (P<0.001). Regarding reasons for skipping breakfast, 'getting more sleep' increased with elevated breakfast frequency, whereas 'loosing appetite' decreased in males (P<0.001). Regarding family reaction to skipping breakfast, 'advising' increased with elevated breakfast frequency in females (P<0.001). Skipping breakfast by eating snacks was higher in females (51.6%) than in males (35.6%), and skipping dinner was higher (53.4%) in females. Awareness of breakfast importance increased with elevated breakfast frequency in males (P<0.05) and females (P<0.001). Perception of correlation between health and breakfast was higher in females (54.8%) compared to males (43.9%), and the most important reason was 'energy supplement'. 'Eating now and will eat' increased with elevated breakfast frequency in males (P<0.001) and females (P<0.001), whereas sum of 'not eating now and will not eat' and 'eating now but will not eat' were 19.2% and 14.2% in males and females, respectively. Therefore, appropriate education programs emphasizing importance of eating breakfast and environmental improvement for regularly eating breakfast for high school students are highly required.

• Journal of Christian Education in Korea
• /
• v.67
• /
• pp.339-375
• /
• 2021

The author considers that contemporary society has entered the era of 'life on earth in peril' as a very serious situation in comparison with the past, and assumes that this life-in-peril situation, known as 'life crisis,' is one of the most urgent and important issues in Christian education as well as in public education. This urgency and importance is mainly based on the belief that Christianity is the religion of life that values all living beings' life and all Christians have the sacred vocation to cope with this crisis of life on earth, given by the life-giving God. For this reason, this study aims at identifying some tasks that Christian education should perform in the era of imperiled life, premising that diverse life-threatening situations and circumstances in today's world are closely related to the Christian Sabbath. More specifically, first of all, this article analyzes some notable phenomena of the life crisis in the contemporary world, such as deaths from intentional self-harm (suicides), deaths from industrial accidents and disasters, the real-life situation of vulnerable populations, people's indifference and insensitivity to the situation, and natural environmental degradation, by reflecting on current global issues as well as issues in Korea. This paper also criticizes neoliberalism, productivism, consumerism, economic materialism, egotism, and anthropocentrism as ideologies for causing these phenomena. After the criticism, the author interprets, from biblical and theological perspectives on the Christian Sabbath, main purposes and meanings of the Sabbath for contemporary society that are deeply connected with the crisis of life on earth: confessing that God takes the initiative to govern every creature's living and being; building the relationship with the God who has given the power of life to all living beings; practicing the Sabbath rest by living a holy life; and participating in the Sabbath rest as 'life-giving ministry.' In conclusion, this article suggests Christian educational practices that confront the life crisis, rooted in the purposes and meanings of the Christian Sabbath: reminding participants of the belief that God is the source of life on earth; cultivating 'life literacy'; helping people to resist the crisis of life; and encouraging humans to pursue the well-being and peace of both humanity and the earth.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.188-202
• /
• 2022

In the insect industry, as the scope of application of insects is expanded from pet insects and natural enemies to feed, edible and medicinal insects, the demand for quality control of insect raw materials is increasing, and interest in securing the safety of insect products is increasing. In the process of expanding the industrial scale, controlling the temperature and humidity and air quality in the insect breeding room and preventing the spread of pathogens and other pollutants are important success factors. It requires a controlled environment under the operating system. European commercial insect breeding facilities have attracted considerable investor interest, and insect companies are building large-scale production facilities, which became possible after the EU approved the use of insect protein as feedstock for fish farming in July 2017. Other fields, such as food and medicine, have also accelerated the application of cutting-edge technology. In the future, the global insect industry will purchase eggs or small larvae from suppliers and a system that focuses on the larval fattening, i.e., production raw material, until the insects mature, and a system that handles the entire production process from egg laying, harvesting, and initial pre-treatment of larvae., increasingly subdivided into large-scale production systems that cover all stages of insect larvae production and further processing steps such as milling, fat removal and protein or fat fractionation. In Korea, research and development of insect smart factory farms using artificial intelligence and ICT is accelerating, so insects can be used as carbon-free materials in secondary industries such as natural plastics or natural molding materials as well as existing feed and food. A Korean-style customized breeding system for shortening the breeding period or enhancing functionality is expected to be developed soon.