• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.194-201
• /
• 2021

Induced polarization (IP) effect is known to be caused by electrochemical phenomena at interface between minerals and pore water. Spectral induced polarization (SIP) method is an electrical survey to localize subsurface IP anomalies while injecting alternating currents of multiple frequencies into the ground. This method was effectively applied to mineral exploration of various ore deposits. Titanomagnetite ores were being produced by a mining company located in Gonamsan area, Gwanin-myeon, Pocheon-si, Gyeonggi-do, South Korea. Because the ores contain more than 0.4 w% vanadium, the ore deposit is called as Gwanin vanadiferous titanomagnetite (VTM) deposit. The vanadium is the most important of materials in production of vanadium redox flow batteries, which can be appropriately used for large-scale energy storage system. Systematic mineral exploration was conducted to identify presence of hidden VTM orebodies and estimate their potential resources. In geophysical exploration, laboratory geophysical measurement of rock samples is helpful to generate reliable property models from field survey data. Therefore, we performed laboratory SIP data of the rocks from the Gwanin VTM deposit to understand SIP characteristics between ores and host rocks and then demonstrate the applicability of this method for the mineral exploration. Both phase and resistivity spectra of the ores sampled from underground outcrop and drilling cores were different of those of the host rocks consisting of monzodiorite and quartz monzodiorite. Because the phase and resistivity at frequencies below 100 Hz are mainly dependent on the SIP characteristics of the rocks, we calculated mean values of the ores and the host rocks. The average phase values at 0.1 Hz were ores: -369 mrad and host rocks: -39 mrad. The average resistivity values at 0.1 Hz were ores: 16 Ωm and host rocks: 2,623 Ωm. Because the SIP characteristics of the ores were different of those of the host rocks, we considered that the SIP survey is effective for the mineral exploration in vanadiferous titanomagnetite deposits and the SIP characteristics are useful for interpreting field survey data.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.263-270
• /
• 2008

The Gas Hydrate Research and Development Organization (KGHDO) of Korea accomplished successfully geophysical logging (LWD: Logging While Drilling, MWD: Measurement While Drilling) for five sites in 2007, in order to investigate the presence of gas hydrate in the Ulleung Basin, the East Sea of Korea. The togging parameters acquired from LWD/MWD dre electrical resistivity, acoustic velocity, neutron density and porosity, and natural gamma. In addition, pressure, temperature, and diameter of borehole were measured. LWD/MWD data showed several evidences indicating the presence of gas hydrate. Based on LWD/MWD data, three coring sites were selected for sampling of gas hydrate. Subsequently, various gas hydrate samples were collected directly from three sites. Therefore. the presence of gas hydrates was verified by coring. LWD/MWD data will be significantly used to estimate the amount of gas hydrate. Also, they will provide important information to elucidate about sedimentologic characteristics of gas-hydrate bearing formation and sedimentary environment of the Ulleung Basin.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.26-35
• /
• 2003

An investigation was carried out to evaluate the effects of pebble size on the small-scale sewage treatment apparatus by natural purification method that consisted of aerobic and anaerobic plot. pH and EC in both plots varied minimally regardless of pebble size. DO in aerobic plot increased as the pebble size decreased. That in the anaerobic plot was slightly less in comparison with that of the aerobic plot but varied minimally, $2.4{\sim}5.1\;mg/L$ regardless of pebble size. Under all experimental conditions, removals of BOD, COD and turbidity in anaerobic plot were more than 98, 91 and 98, 98% respectively. Removals of T-N and T-P increased as pebble size decreased. Under all experimental conditions, removals of T-N and T-P in anaerobic plot were about $45{\sim}59$ and $480{\sim}96%$, respectively. Judging from the above results, it should be considered that the optimum pebble size and pebble permeability in both plot was $2{\sim}4$ and $0.1{\sim}4\;mm$, respectively.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.199-206
• /
• 2012

This study was conducted in a glasshouse to examine the possibility of producing tomato plug seedlings in a newly-developed inert phenolic foam medium. Plug seedlings of 'Madison' tomato were grown in four pellet type media, Grodan rockwool, UR rockwool, phenolic foam LC, and phenolic foam LC-lite. Seed germination was checked for 7 days. Seedling growth was measured at 19 days after sowing. The greatest germination was obtained in the phenolic foam LC and phenolic foam LC-lite. Plant height, hypocotyl length, leaf area, dry weight, and fresh weight were significantly greater in the rockwool medium than those in the other media. However, the T/R ratio and stem diameter were the greatest in the phenolic foam LC than those in the other media. The total porosity and container capacity of the phenolic foam LC was higher than in the other media. The air space (%) was lowest in the phenolic foam LC. Overall, the phenolic foam LC and phenolic foam LC-lite produced seedlings with similar growth as the rockwool. These results suggested that both phenolic foam LC and phenolic foam LC-lite have potential to be used in production of plug seedlings of 'Madison' tomato.

• Korean Journal of Environment and Ecology
• /
• v.27 no.3
• /
• pp.357-368
• /
• 2013

This study was carried out to classify and describe the vegetation of algific talus in Korea by methods of the ZM school of Phytosociology. A part of slope or a hollow at the foot of talus in which cool air exhausts from underground through gaps of accumulated rock debris is called algific talus. From the sixty three stands obtained, the following two community and their four subcommunity were recognized: A. Quercus variabilis - Cystopteris fragilis com. B. Quercus mongolica - Betula schmidtii com. B-1. Quercus serrata - Urtica angustifolia subcom. B-2. Sorbus commixta - Spiraea chamaedryfolia subcom. B-3. Zabelia biflora - Astilboides tabularis subcom. B-4. Typical subcom. A. Quercus variabilis - Cystopteris fragilis com.. As a result of DCCA ordination, Quercus variabilis - Cystopteris fragilis com. has Quercus variabilis, Ligustrum var. obtusifolium, Zelkova serrata, Viburnum carlesii etc. as differential species, which showed the higher correlation with area of high Warmth index (WI) and precipitation than Quercus mongolica - Betula schmidtii com. has Quercus mongolica, Sorbaria var. sorbifolia, Magnolia sieboldii, Acer pseudosieboldianum, Rosa acicularis etc. as differential species. Sorbus commixta - Spiraea chamaedryfolia subcom. has Spiraea chamaedryfolia, Sorbus commixta, Rosa koreana, Vaccinium var. hirtum, Acer tegmentosum, Dryopteris expansa, Abies holophylla etc. as differential species. and Typical subcom in Quercus mongolica - Betula schmidtii com. were distributed in higher altitude and precipitation area than others. Zabelia biflora - Astilboides tabularis subcom. has Spiraea chinensis, Zabelia biflora, Astilboides tabularis, Gymnocarpium jessoense, Saussurea mongolica, Larix kaempferi etc. as differential species, which was distributed in area with high amounts of sunlight exposure by human activities.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.33-41
• /
• 2018

Large amounts of leaves from street trees fall onto the streets annually and need to be cleaned and treated. Cherry trees are common street trees in Korea. The adsorption characteristics of Pb(II) by cherry leaf (CL) and cherry leaf-derived biochar (CB) were studied through a series of batch experiments. CB was produced through the carbonization of CL at $800^{\circ}C$ for 90 min. Carbonization increased the C content and pH value, while decreased H and O contents. Well developed pore structure was observed at the surface of CB. The pseudo-second order model better described the kinetics of Pb(II) adsorption onto CL and CB, indicating that the rate-limiting step of the heavy metal sorption is chemical sorption. Fast adsorption rates and high adsorption capacities were obtained by the carbonization from CL to CB. Langmuir models better adequately described the Pb(II) adsorption onto CL and CB. Maximum adsorption capacities of Pb(II) expressed by Langmuir constant, $Q^0$ were 37.31 mg/g and 94.34 mg/g, when CL and CB were used as adsorbents, respectively.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.287-295
• /
• 2010

In this study, ordinary Portland cement was used and the air void was minimized by using minute quartz as the filler. In addition, steel fibers were used to mitigate the brittle failure problem associated with high strength concrete. This study is in progress to make an Ultra-high strength powdered concrete (UHSPC) which has compressive strength over 300 MPa. To increase the strength of concrete, we have compared and analyzed the compressive strengths of the concretes with different mix proportions and curing conditions by selecting quartz sand, dolomite, bauxite, ferro silicon which have diameters less than 0.6 mm and can increase the bond strength of the transition zone. Ultra-high strength powdered concrete, which is different from conventional concrete, is highly influenced by the materials in the mix. In the study, the highest compressive strength of the powdered concrete was obtained when it is prepared with ferro silicon, followed in order by Bauxite, Dolomite, and Quartz sand. The amount of ferro silicon, when the highest strength was obtained, was 110%, of the weight of the cement. SEM analysis of the UHSPC showed that significant formation of C-S-H and Tobermorite due to high temperature and pressure curing. Production of Ultrahigh strength powdered concrete which has 28-day compressive strength upto 341MPa has been successfully achieved by the following factors; steel fiber reinforcement, fine particled aggregates, and the filling powder to minimize the void space, and the reactive materials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.4
• /
• pp.304-311
• /
• 1993

To find out suitable crops and their rotation years with rice for paddy-upland rotation, continuous rice cropping and rice with 1, 2 and 3 years cropping of upland crops(soybean, maize and job's tears) were tested for four years from 1989 to 1992. Rice yield, when averaged over rotation years for each crop, was increased ranging from 7% to 12% when compared with that of continuous rice cropping. With every crop, rice yield of 2 year upland rotation was higher than that of 1 year upland rotation, but rice quality seemed to deteriorate in paddy-upland rotation. When considering yields of the upland crops, 1 year rotation was the best condition for soybean and job's tears, with 3 years rotation being the best for maize. In paddy-upland rotation, number of weed species and its occurrence rates were reduced in paddy and upland condition and the reduction rates in paddy condition were higher than those in upland condition. Physical properties of soil were improved in paddy-upland rotation and airphase seemed to increase with increasing upland period.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.551-558
• /
• 2011

The effect of the maximum aggregate size and substitution rate of natural sand on the mechanical properties of concrete is evaluated using 15 lightweight aggregate concrete mixes. For mechanical properties of concrete, compressive strength increase with respect to age, tensile resistance, elastic modulus, rupture modulus, and stress-strain relationship were measured. The experimental data were compared with the design equations specified in ACI 318-08, EC2, and/or CEB-FIP code provisions and empirical equations proposed by Slate et al., Yang et al., and Wang et al. The test results showed that compressive strength of lightweight concrete decreased with increase in maximum aggregate size and amount of lightweight fine aggregates. The parameters to predict the compressive strength development could be empirically formulated as a function of specific gravity of coarse aggregates and substitution rate of natural sand. The measured rupture modulus and tensile strength of concrete were commonly less than the prediction values obtained from code provisions or empirical equations, which can be attributed to the tensile resistance of lightweight aggregate concrete being significantly affected by its density as well as compressive strength.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.286-293
• /
• 2002

Microstructure and the electrical porperties of a ZnO-based multilayered chip-type varistor(abbreviated as MLV) with Ag/Pd(7:3) inner electrode have been studied as a function of firing of temperature. At 1100$^{\circ}$C, inner electrode layers began to show nonuniform thickness and small voids, which resulted in significant disappearance of the electrode pattern and delamination at 1100$^{\circ}$C. MLVs fired at 950$^{\circ}$C showed large degradation in leakage current, probably due to incomplete redistribution of liquid and transition metal elements in pyrochlore phase decomposition. Those fired at 1100$^{\circ}$C and above, on the other hand, revealed poor varistor characteristics and their reproductibility, which are though to stem from the deformation of inner electrode pattern, the reaction between electrode materials and ZnO-based ceramics, and the volatilization of $Bi_2O_3$. Throughout the firing temperature range of 950∼1100$^{\circ}$C, capacitance and leakage current increased while breakdown voltage and peak current decreased with the increase of firing temperature, but nonlinear coefficient and clamping ratio kept almost constant at ∼30 and 1.4, respectively. In particular, those fired between 1000$^{\circ}$C and 1050$^{\circ}$C showed stable varistor characteristics with high reproducibility. It seems that Ag/Pd(7:3) alloy is one of the electrode materials applicable to most ZnO-based MLVs incorporating with $Bi_2O_3$ when cofired up to 1050$^{\circ}$C.