• 한국문화재보존과학회:학술대회논문집
• /
• 2004.03a
• /
• pp.78-91
• /
• 2004

염(Salts)은 일반적으로 가장 강력한 풍화요인 물질 중 하나이다. 염의 결정화(crystallization) 및 수화(hydration)작용은 석재의 화학적 풍화 뿐만이 아니라 물리적 풍화를 가속화 시킨다. 감은사지 석탑은 오랜 세월 대기 중에 노출되어 대기환경오염으로 인한 화학적 풍화 뿐만이 아니라 지리적으로 바다에 인접해 있어 바다에서 기원한 염화나트륨(NaCl)의 영향으로 다른 석조물에 비해 심한 물리적 풍화현상을 보이고 있다. 편광 현미경 및 SEM, XRD, XRF를 이용하여 석탑의 구성석재 및 염(salts)에 대한분석을 실시하였으며, 용출실험을 통해 얻은 용액에 대해서는 IC와 ICP-AES를 이용하여 분석하였고, 염류와 석재의 반응산물로 만들어진 염에 대해서는 정방위시료와 부정방위시료를 제작하여 분석하였다. 감은사지 석탑을 이루는 암석은 결정응회암으로 주 구성 광물은 사장석 및 정장석이며 소량의 석영 및 흑운모 등이 함유되어 있고 소량의 유리질 석기로 구성되어 있다. 석재의 표면에는 주 구성 광물들의 화학적 풍화로 인해서 생성된 2차 광물로 팽창성 점토광물인 스멕타이트가 존재하며, 대기오염물질과의 결합에 의해 생성된 대표적인 황산염인 석고$(gypsum,\;CaSO_4{\cdot}2H_2O)$, 소금(halite, NaCl), 해양기원 염류인 소금성분과 대기오염물질이 만들어낸 테나다이트$(thenardite,\;Na_2SO_4)$가 존재한다. 이들 염류는 일차적으로 암석의 표면에 백화현상을 초래하기도 하고, 대기 중의 오염물질과 결합하여 일부는 흑화현상을 보이기도 한다. 또한 암석 내 수분이 증가할 경우 이들 염들이 암석의 공극이나 열극을 따라 내부로 이동하여 subflorescence를 발생시켜 박락 및 박탈의 원인이 되었으며, 온도와 수분의 변화에 따른 이들 염(salts)의 수화 및 결정 작용 그리고 새로운 염(salts)의 침전작용을 반복하면서 석재 내부와 외부의 암석 및 결정에 균열과 미세열극 등이 생성되어 석재 자체의 구조적 안정성에 영향을 주고 있다. 따라서 감은사지 석탑은 지리적 환경 차이로 인해 일반적인 환경의 석조물들과는 다른 형태의 풍화양상을 보이고 있어서 풍화양상 및 풍화형태에 대한 정확한 연구와 이해를 바탕으로 보존대책이 마련되어야 한다.

• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.245-251
• /
• 2001

This research was conducted to study the changes in physical characteristics of mushrooms (Agaricus bisporus) as influenced by drying methods. Samples were dried using either hot air drying, vacuum drying, or freeze drying and changes in the color, browning index, hardness and rehydration rate were evaluated by response surface methodology. Hot air drying resulted in the fastest drying of sample as compared to other methods. The rate of drying was most affected by the environmental temperature rather than air velocity or vacuum pressure. The overall color difference increased as the temperature and air velocity increased. The overall color changes of the freeze dried samples were minimal as compared to those of fresh mushrooms. The hot air dried samples showed the greatest changes in the overall color, browning index as well as hardness. The freeze dried samples showed the best rehydration characteristic and maintained the best overall quality after drying.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.985-988
• /
• 2008

Maglev is a system that a train runs levitated above a rail. Therefore it is very important to maintain a constant levitation gap for achieving serviceability and ride comfort. This study is a cooperation research subject of the 3-1 subject, performance improvement of maglev track structures, of the Center for Urban Maglev Program in Korea, started in 2006. The aim of this study is development of rapid constructions of bridge superstructure for maglev. At present, precast deck is widely used because of its superiority to cast-in-place concrete on quality and the term of works. The research group suggested basic systems of maglev guideway with PSC-U type and trapezoidal open steel box type girder, and precast deck, cooperating with Korea Railroad Research Institute, the managing institute of the 3-1 subject. In this study, full-scale structure was fabricated for structural safety evaluation of precast decks and rail, and a static performance test of those structures was performed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.57-60
• /
• 2008

Maglev is a system that a train runs levitated above a rail. Therefore it is very important to maintain a constant levitation gap for achieving serviceability and ride comfort. This study is a cooperation research subject of the 3-1 subject, performance improvement of maglev track structures, of the Center for Urban Maglev Program in Korea, started in 2006. The aim of this study is development of rapid constructions of bridge superstructure for maglev. At present, precast deck is widely used because of its superiority to cast-in-place concrete on quality and the term of works. The research group suggested basic systems of maglev guideway with PSC-U type and trapezoidal open steel box type girder, and precast deck, cooperating with Korea Railroad Research Institute, the managing institute of the 3-1 subject. In this study, a mock-up consisted of girders, decks and rail was fabricated and test was performed for constructability, serviceability and maintenance evaluation of PSC U-type girder, precast deck, and new guide rail system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1053-1056
• /
• 2008

Permeability coefficient of concrete is a substantial key parameter for understanding the durability performance of concrete and its micro-structural densification. Many researches to deal with the issue have been accomplished, however, it is very rare to deal with the theoretical study on permeability coefficient in connection with carbonation of concrete and the effect of volumetric fraction of cement paste or aggregate on the permeability coefficient. The majority of these researches have not dealt with this issue combined with carbonation of concrete, although carbonation can significantly impact on the permeability coefficient of concrete. The purpose of this study is to establish a fundamental approach to compute the permeability coefficient of (non)carbonated concrete. When simulating micro-structural characteristics as a starting point for deriving a model for the permeability coefficient by the numerical simulation program for cementitious materials, HYMOSTRUC, a more realistic formulation can be achieved. For several compositions of cement pastes, the permeability coefficient is calculated with the analytical formulation, followed by a microstructure-based model. Emphasis is on the micro-structural changes and its effective change of the permeability coefficient of carbonated concrete. The results of micro-structural water permeability coefficient model will be compared with results achieved from permeability experiments.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.305-311
• /
• 2016

This study examined the long-term inelastic characteristics, including unrestrained shrinkage and creep, of low-heat cement concrete under different ambient curing temperatures. To achieve the designed compressive strength of 42MPa, water-to-binder ratios were selected to be 27.5, 30, and 32.5% for curing temperatures of 5, 20, and $40^{\circ}C$, respectively. Test results showed that the shrinkage strains of concrete mixtures tended to decrease with the decrease in curing temperature because of the delayed evaporation of internal capillary and gel waters. Meanwhile, creep strains were higher in concrete specimens under lower curing temperature due to the occurrence of the transition temperature creep. The design models of KCI provision gave better accuracy in comparison with test results than those of ACI 209, although a correction factor for low-heat cement needs to be established in the KCI provision.

• Geophysics and Geophysical Exploration
• /
• v.3 no.3
• /
• pp.101-111
• /
• 2000

In order to assess the seawater intrusion, induction, temperature and conductivity of fluid, and natural gamma logs were obtained in nine wells at the three study areas having different hydrogeologic characteristics. Besides surface geophysical exploration, supplementary geophysical well logs were carried out to understand the hydrogeological characteristics related to the seawater intrusion in the study areas. The geophysical well logs have been proved to increase the accuracy of interpretation of the surface geophyscial exploration's data for assessment of seawater intrusion, and to get the optimum depth for a long monitoring of groundwater. They, also, revealed that the identification of hydrogeological units for strata's porosity was able to be achieved and were illustrated the applicability of geophysical well logs monitoring. Finally, geophysical well logs are expected to play to get the more quantitative information of seawater infusion, if it is fully collaborated with a better method that is strata's resistivity determination with not relatively much effected by seawater within the drilled borehole and that is the porosity measurement with built on small diameter PVC casing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1104-1108
• /
• 2010

최근 수자원의 효율적인 배분을 위한 수자원관리의 중요성에 대한 인식과 하천의 환경적 기능에 대한 사회적 요구 증대로 수자원 기초조사에 의해 수집되어진 자료의 활용빈도가 다양한 분야에서 증가하고, 높은 신뢰도와 정확도를 요구하고 있다. 개발된 수위-유량 관계식의 신뢰도 검증은 일반적으로 지점별 수위-유량 관계식과 수위자료에 의해 산정된 유하량을 유역의 면적평균 강우량을 이용하여 산정한 유출률과 비교 분석하는 수문학적 방법에 의해 이루어지고 있는 실정이다. 최근에는 공간적인 비균질성을 고려하여 유출과정에서 운동역학적인 이론을 기반으로 물의 흐름을 수리학적으로 추적해 나가는 물리적 기반의 분포형 유출모형의 활용도가 높아지고 있음에 따라 본 연구에서는 낙동강수계 임하댐유역을 대상으로 물리적 기반의 분포형 모형인 $Vflo^{TM}$을 적용하여 유출량을 산정하고, K-water에서 수자원 환경기초조사 성과로 개발된 임하댐 상류 영양 수위관측소의 수위-유량 관계 곡선식을 이용하여 산정된 유출량과 비교함으로써 수자원기초조사 성과의 신뢰도를 검증하였다. 분포형 유출모형 적용에 필요한 매개변수 추출을 위해 GIS 기법을 이용하여 DEM, 토지피복도, 토양도에서 $Vflo^{TM}$의 입력인자인 경사도, 흐름방향, 조도계수, 수리전도도, 유효공극률, 토양심도를 추출 산정하였으며, 임하댐 유역의 8개 우량관측소 시우량자료를 이용하여 강우의 공간적인 통계 특성을 잘 반영하는 크리깅(Kriging) 기법에 의한 분포형 강우를 생성하였다. 또한, 본 모형을 통해 검증된 초기함수조건 등의 유역의 특성을 이용한 단기유량예측을 통하여 홍수량 예측 및 수문조사 효율성 향상에 매우 중요한 역할을 할 것으로 기대된다.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2006

Nanofiber is a broad phrase generally referring to a fiber with diameter less than 1 micron. Various polymers have been successfully electrospun into nanofibers in recent years. These nanofibers, due to their high surface area and porosity, have a great potential for use as filter medium, adsorption layers in protective clothing, etc. Nanofiber filters will enable new levels of filtration performance in the field of air filtration. In particular, nanofibers provide marked increases in filtration efficiency at relatively small pressure drop in permeability. Therefore, nanofiber filters could be substituted for conventional filter market due to the easy application of process and the possibility of coating to micron-sized non-woven sheets. This review is discussed on the trend of researche and development related to nanofiber filter including future marketability.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.1
• /
• pp.38-47
• /
• 1993

Clinoptilolite and mordenite are important constituents of the Nuldaeri Trachytic Tuff and Guryongpo Dacitic Tuff of the Tertiary Janggi Group which were deposited in a lacustrine environment. The diagenetic cystallization sequences of zeolites in different tuffaceous sediments and their chemical behaviors have been studied to know the process of their formation. The paragenetic sequence established from textural observations and chemical data : Ca-smectite ${\leftrightarrow}$(Ca, K)-clinoptilolite${\leftrightarrow}$(K, Na)-mordenite, indicates that the chemical activities of alkalic ions and Si/Al activity ratio in pore fluids changed systematically with diagenetic alteration. The chemical trend of zeolite formation is characterized by decreasing Ca and Mg, non-variable Na and increasing K in the Nuldaeri Trachytic Tuff and by decreasing Ca and Mg, non-variable Na and increasing-decreasing K in the Guryongpo Dacitic Tuff. The paragenesis from glass via smectite to alkali zeolites indicates a sequence of incongruent dissolution reactions and subsequent crystallization. Inhomogeneity in chemical composition of each zeolite may be attributed to such processes.