• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.78-90
• /
• 2021

In order to construct a precision geoid, it has been diversified into land, sea, aviation, and satellite gravity measurement methods, and measurement technology has developed, making it possible to secure high-resolution, high-precision gravity data. The construction of precision geoids can be fast and conveniently decided through GNSS surveys without separate leveling, and since 2014, the National Geographic Information Institute has been developing a hybrid geoid model to improve the accuracy of height surveying based on GNSS. In this study, the results of the GNSS height measurement were compared and analyzed choosing existing public reference points to verify the GNSS height measurement of public surveys. Experiments are conducted with GNSS height measurements and analyzed precision for public reference points on coastal, border, and mountainous terrain presented as low-precision areas or expected-to-be low-precision in research reports. To verify the GNSS height measurement, the GNSS ellipsoid height of the surrounding integrated datum to be used as a base point for the GNSS height measurement at the public datum. Based on the checked integrated datum, the GNSS ellipsoid of the public datum was calculated, and the elevation was calculated using the KNGeoid18 model and compared with the results of the direct level measurement elevation. The analysis showed that the results of GNSS height measurement at public reference points in the coastal, border, and mountainous areas were satisfied with the accuracy of public level measurement in grades 3 and 4. Through this study, GNSS level measurement can be used more efficiently than existing direct level measurements depending on the height accuracy required by users, and KNGeoids 18 can also be used in various fields such as autonomous vehicles and unmanned aerial vehicles.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.79-88
• /
• 2015

In any production and construction of geospatial information covering surveying, survey control point is a vital geospatial information. Survey control points in South Korea are currently classified as following: national control points, public control points, and cadastral control points. Each of these different categories of survey control points act as a basis and sets perimeters for the production, management and operation of subjects within the category. Universal standard, the unified format between different survey control points, also, are not yet defined, causing difference in basic information provided by altering categories and disturbance in connecting, managing, utilizing and operating survey control points. Establishment of a standard regarding survey control points, is therefore required for the efficacy of their utilization. This study, to solve such inadequacies, selects management items for creation of standardized survey control point, by investigating domestically and internationally the status of operating survey control points, determining data model for management, establishing TTA and agency standards, and establishing of activation methodology for survey control point standards.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.93-106
• /
• 2023

The objective of this study is to improve the survey rate and reliability of survey control point marks, which serve as the foundation for location-based services. Within the scope of this research, we have inspected the current status and reporting systems for national control point marks, public control point marks, and cadastral control point marks, identifying various issues. To tackle these challenges, we have prepared proposals for new unit cost calculations for national control point mark inspections, enhancements to the inspection and reporting systems for survey control point marks, and preliminary reporting procedures for surveyors using these control point marks. Additionally, we have established a workflow to refine the process of survey control point mark inspections and have proposed an automated system for calculating the unit cost for unreported targets. The study anticipates that these changes will improve the efficiency of future survey control point mark inspection tasks.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.13-20
• /
• 2010

Currently, NGII(National Geographic Information Institute) provides VRS(Virtual Reference System) service using 44 CORS(Continuously Operating Reference Stations). Since the VRS provides high-precision coordinate in a short time, the users and applications are expected to be rapidly increasing. The accuracy analysis on the VRS service, however, was not sufficiently performed yet. Therefore, in this study, the VRS data is acquired from various circumstances and its accuracy is analyzed. According to analysis, it was concluded that the VRS could be applied to public control point survey. Furthermore, it was found that the PQ(Position Quality) which represents variance of estimated coordinates rather than GDOP(Geometric Dilution of Precision) is more relevant as a factor to determine the accuracy of coordinates. Based on the analysis of data from four manufacturers (TRIMBLE, MAGELLAN, LECIA, TOPCON), it was confirmed that the standard deviations better than 3cm. Therefore, VRS Survey apply to public control point survey.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.99-107
• /
• 2013

With the expansion of the development and use of surveying equipment recently, by the establishment of infrastructure for network RTK surveying of the NGII, network RTK surveying has been widely used in surveying industry. Currently, in public surveying regulations, site calibration with minimum 5 evenly spaced bench marks is needed for using network RTK surveying results as leveling. But the range between and the number of bench marks for site calibration can be varied according to the geoid undulation. In this study, in order to verify this, Incheon area having regular geoid undulation and Taebaek area having irregular geoid undulation are selected as study area and network RTK surveying have been done. Then the accuracy of site calibration by range between and the number of bench marks have been compared. As a result of this study, in order to meet a tolerance of vertical precision (0.1m) that has been set in public surveying regulations, there is a necessity for improving the regulations so that the range and number of bench marks, to be used for site calibration of network RTK surveying, can be applied complementarily.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.195-206
• /
• 1997

By this time, in order to measure baseline in a few minutes, we must have used expensive dual frequency receiver. Recently, low-priced single frequency receiver have taken place of dual frequency receiver at short base-line by advancement in software development, improvements in geodetic survey receiver system. In this study, according to the observation time and measurement interval, we analyzed differences of each components of baseline by field experiment and we propose the criterion for the minor control point surveying by single frequency GPS receiver.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.457-467
• /
• 2018

Currently, the regulation and rules for public surveying and the UCPs (Unified Control Points) adapts those of the triangulated traverse surveying. In addition, such regulations do not take account of the unique characteristics of GNSS (Global Navigation Satellite System) surveying, thus there are difficulties in field work and data processing afterwards. A detailed procesure of GNSS processing has not yet been described either, and the verification of accuracy does not follow the generic standards. In order to propose an appropriate procedure for field surveys, we processed a short session (30 minutes) based on the scenarios similar to actual situations. The reference network in Seoul was used to process the same data span for 3 days. The temporal variation during the day was evaluated as well. We analyzed the accuracy of the estimated coordinates depending on the parameterization of tropospheric delay, which was compared with the 24-hr static processing results. Estimating the tropospheric delay is advantageous for the accuracy and stability of the coordinates, resulting in about 5 mm and 10 mm of RMSE (Root Mean Squared Error) for horizontal and vertical components, respectively. Based on the test results, we propose a procedure to estimate the daily solution and then combine them to estimate the final solution by applying the minimum constraints (no-net-translation condition). It is necessary to develop a web-based processing system using a high-end softwares. Additionally, it is also required to standardize the ID of the public control points and the UCPs for the automatic GNSS processing.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 1999.12a
• /
• pp.52-58
• /
• 1999

본 연구에서는 국내의 항공사진측량에서 적용되지 않고 있는 광속조정 Program을 구현하였다. 또한, 구현된 프로그램을 이용하여 과천지역에 대한 측량자료를 처리하였다. GPS를 이용하여 결정한 카메라 노출중심 위치를 이용하여 광속조정에 적용한 결과는 지상기준점수가 감소하여도 정확도는 완만하게 저하되었으나, 지상기준점만을 이용하여 광속조정에 적용한 결과는 지상기준점수가 감소함에 따라 정확도는 급격하게 저하되었다. GPS를 이용하여 결정한 카메라 노출중심 위치를 광속조정에 적용한 결과 블록 가장자리에 배치한 4개의 지상기준점 만으로 공공측량에 적합한 결과를 얻을 수 있었다. 본 연구를 통하여 GPS로 결정한 카메라의 노출중심위치를 항공삼각측량에 적용할 경우 필요한 지상기준점수를 축소함으로써, 비용을 절감할 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.778-778
• /
• 2012

수문조사시설 중 하나인 영점표고검정수준점은 장기간의 시간 경과에 따른 하천 수문관측 환경변화로 망실 및 침하 등으로 인한 신뢰도가 저하되고 있는 것이 현실이다. 수위표 영점표고는 일반적으로 하상부터 자유수면의 높이까지를 일컫는 수위에 대한 기준 높이가 되는 값으로 영점표고의 변동은 수위의 변동을 초래하기 때문에 관측된 수위의 시계열 연속성을 확보하기 위해서는 영점표고검정수준점의 신뢰도가 대단히 중요하다. 따라서 본 연구에서는 수문자료에 직접적인 품질에 영향을 줄 수 있는 영점표고검정수준점에 대하여 체계적이고 전문적인 공공측량을 실시하였으며, 왕복수준측량 과정에서 발생할 수 있는 오류 및 오차를 검증하기 위해 RTK-GPS 측량을 병행 실시하였다. RTK-GPS 측량을 실시하기 전 낙동강권역내의 국립지리정보원에서 관리하고 있는 통합기준점을 대상으로 삼각망 구축을 실시하였다. RTK-GPS 측량의 결과를 토대로 직접수준측량과의 비교 검토를 실시하였으며, 두 측량성과간의 차이가 0.2m 이상을 경우에는 재 측량을 실시하여 발생될 수 있는 오류를 최소화 하였다. 또한 수준측량과 RTK-GPS 측량으로 확정된 영점표고검정수준점의 표고값을 이용하여 수위표 영점표고의 적정성을 검토하고자 하는 해발수위 비교를 실시하였다. 비교방법은 비교적 수면경사가 크게 나타나지 않는 지점을 선택하여 적정성을 검토하였으며, 기존 영점표고검정수준점보다 개선되는 효과를 얻을 수 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.107-114
• /
• 2002

This study aimed to estimate accuracy of GPS/Leveling and to present availability of GPS/Leveling in public surveying. For this purpose, we carried out GPS survey for bench marks and control points of Hongsung area. Orthometric heights calculated by two GPS/Leveling methods were compared to reference height. The one is calculated by base of geoid models such as EGM96, OSU91A, KGEOID99, and the other is calculated by network adjustment using fixed point. The results of GPS/Leveling by geoid models show that RMSE of EGM96 is ${\pm}0.061m,\;OSU91A\;{\pm}0.725m,\;KGEOID99\;{\pm}0.598m$. The results of GPS/Leveling by network adjustment show that the best RMSE is ${\pm}0.043m$ in case of using three fixed bench mark, and this method can be used for leveling effectively. GPS/Leveling would be able to apply in forth order public leveling and height determination of public control points.