• Title/Summary/Keyword: 공간 평가

Search Result 7,042, Processing Time 0.031 seconds

Pillar Width of Twin Tunnels in Horizontal Jointed Rock Using Large Scale Model Tests (대형모형실험을 통한 수평 절리암반에서의 병설터널 이격거리)

  • Lee, Yong-Jun;Lee, Sang-Duk
    • Tunnel and Underground Space
    • /
    • v.20 no.5
    • /
    • pp.352-359
    • /
    • 2010
  • Stability of twin tunnels depends on the pillar width and the ground condition. In this study, large scale model tests were conducted for investigating the influence of the pillar width of twin tunnels on their behavior in the regular horizontal jointed rock mass. Jointed rocks was composed of concrete blocks. Pillar width of twin tunnels varied in 0.29D, 0.59D, 0.88D and 1.18D, where D is the tunnel width. During the test, pillar stress, lining stress, tunnel distortion, and ground displacement were measured. Lateral earth pressure coefficient was kept in a constant value 1.0. As a result, it was found that the pillar stress and the displacement of the ground and tunnel were increased by decreasing pillar width. The maximum displacement rate was measured just after the upper excavation in each construction sequence. And the maximum influence position was the right shoulder of the preceeding tunnel at the pillar side. It was also found that for the stability assessment the inner displacement was more critical than the crown displacement. The influence zone was formed at the pillar width 0.59D~0.88D that was smaller than 0.8D~2.0D, which was proposed by experience for a good ground condition. And it would be concluded that horizontal joints could also influence on the stability of the twin tunnels.

Significance of Modern Analog Studies for Exploration and Development of Oil Sand (오일샌드 탐사 및 개발을 위한 현생유사퇴적환경 연구의 중요성)

  • Choi, Kyung-Sik
    • The Korean Journal of Petroleum Geology
    • /
    • v.14 no.1
    • /
    • pp.12-20
    • /
    • 2008
  • Oil sands in Canada are representative example of unconventional resources whose reserve estimates are as large as those in Saudi Arabia. Typical reservoir rocks of oil sands consist of channel-related deposits formed in a tide-dominated depositional setting. The tidal deposits are commonly characterized by spatially complicated and heterogeneous properties. Successful engineering methods to develop oil sands require in-depth understanding in the spatial distribution of reservoir properties. Geological model for oil sand reservoir characterization can be built on the basis of comparative studies of ancient and modem analogues. In particular, modern analogue studies become increasingly indispensable, since they provide better understanding in the reservoir-rock forming process and more importantly in the external mechanism responsible for the reservoir heterogeneity. Tide-dominated environment along the west coast of Korea is considered as one of the most excellent modem analogues of oil-sand forming depositional environment. Korean tidal environment provides insights on the origin of mud breccia, facies and stratigraphic architecture which are key issues to the characterization of oil sand reservoirs.

  • PDF

Organization of Profitable Cattle Husbandry Through Exploiting Favourable Environment Factors (환경요인을 적절하게 이용한 경제성 있는 축산조직 -헝가리의 사례연구-)

  • Alpha, Gyorgy;Kim, Jong-Moo
    • Korean Journal of Organic Agriculture
    • /
    • v.7 no.2
    • /
    • pp.89-97
    • /
    • 1999
  • Through manifestation of the principles of commodity production spatial sharing of labour can be observed in the agriculture as well as in cattle production. Better adjustment of the production structure to the environment factors brings higher yields and more effective production. In being able to maximize the profit the entrepreneurs opt for producing output that closely matches to their featuring conditions. In contrary to the relatively high "mobility" of crop production animal husbandry and within this cattle production - as known - is strictly chained to forage production. On the basis of our economic research and as a result of multivariable analysis(factor analysis) it can be concluded that two variable groups(factors) are highly dominant in organizing profitable cattle production. First of them is the crop site factor (indicated by gold crown value), the second is the forage production feature(forage and grassland area and the yield of them). During recent years the weight of environmental factors suffered from devaluation. As a result of the central economic administration differentiating effects were suppressed and the chances of equalizing concepts strengthened. The outcome can be observed even today. In the regions, for example, being predominantly suitable for grass and forage cropping the milk and slaughter cattle production decreased. The same is ture for com and pig production regions. Unexploitment of local environmental features can be observed mainly in grassland management. Branches being potential user of grasslands hardly take them into consideration. Main method of rational use of grasslands is pasturing. Presence of pastures and the usage of them through cattle production is highly important not only for profitable production but also for maintaining ecological stability.

  • PDF

Spatio-temporal Distribution of Benthic Polychaetous Communities and Their Health Conditions in Garolim Bay, West Coast of Korea (가로림만 저서다모류군집의 시·공간 분포 및 건강 상태)

  • Wi, Chan Woo;Lee, Jung Ho;Shin, Hyun Chool
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.19 no.4
    • /
    • pp.256-264
    • /
    • 2014
  • This study was carried out to estimate the benthic environments and polychaetous community in Garolim Bay, through five field surveys from April 2006 to April 2007. Garilim Bay is a semi-enclosed bay and composed of a biramous tidal channel and nearby wide tidal flats. Surface sediment in the inner bay was composed of fine grained particles whereas that in the mouth area of bay was of coarse grained ones. Benthic polychaete worms were the most dominant taxa occupying 65.1% of total benthic macrofauna. Species number was higher in the inner bay than mouth and outer area of bay, and in the bay higher on the tidal flat than channel area. Density was higher on the tidal flat than channel area. Dominant polychaetous species were Prionospio sp., Heteromastus filiformis, Lumbrineris longifolia and so on, which is known as opportunistic species. Prionospio sp. and H. filiformis inhabited mainly on the tidal flats in inner bay, while L. longifolia in the channel area and mouth of the bay. Cluster analysis and nMDS showed the typical inner-to-outward distribution of station groups, which indicated the sequential difference of the species composition of each station group. To assess the benthic healthiness of Garolim Bay by AMBI and BPI analysis, the benthic condition was analyzed from slightly polluted in the outer and mouth of the bay to moderately polluted in the inner bay. Assumed from dominant species composition and benthic healthiness condition, benthic environments of Garolim Bay was slightly unstable and disturbed and organic enrichment was currently underway by massed fisheries farms.

Establishment of Thermal Infrared Observation System on Ieodo Ocean Research Station for Time-series Sea Surface Temperature Extraction (시계열 해수면온도 산출을 위한 이어도 종합해양과학기지 열적외선 관측 시스템 구축)

  • KANG, KI-MOOK;KIM, DUK-JIN;HWANG, JI-HWAN;CHOI, CHANGHYUN;NAM, SUNGHYUN;KIM, SEONGJUNG;CHO, YANG-KI;BYUN, DO-SEONG;LEE, JOOYOUNG
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.22 no.3
    • /
    • pp.57-68
    • /
    • 2017
  • Continuous monitoring of spatial and temporal changes in key marine environmental parameters such as SST (sea surface temperature) near IORS (Ieodo Ocean Research Station) is demanded to investigate the ocean ecosystem, climate change, and sea-air interaction processes. In this study, we aimed to develop the system for continuously measuring SST using a TIR (thermal infrared) sensor mounted at the IORS. New SST algorithm is developed to provide SST of better quality that includes automatic atmospheric correction and emissivity calculation for different oceanic conditions. Then, the TIR-based SST products were validated against in-situ water temperature measurements during May 17-26, 2015 and July 15-18, 2015 at the IORS, yielding the accuracy of 0.72-0.85 R-square, and $0.37-0.90^{\circ}C$ RMSE. This TIR-based SST observing system can be installed easily at similar Ocean Research Stations such as Sinan Gageocho and Ongjin Socheongcho, which provide a vision to be utilized as calibration site for SST remotely sensed from satellites to be launched in future.

A Time Slot Assignment Scheme for Sensor Data Compression (센서 데이터의 압축을 위한 시간 슬롯 할당 기법)

  • Yeo, Myung-Ho;Kim, Hak-Sin;Park, Hyoung-Soon;Yoo, Jae-Soo
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.15 no.11
    • /
    • pp.846-850
    • /
    • 2009
  • Recently, wireless sensor networks have found their way into a wide variety of applications and systems with vastly varying requirements and characteristics such as environmental monitoring, smart spaces, medical applications, and precision agriculture. The sensor nodes are battery powered. Therefore, the energy is the most precious resource of a wireless sensor network since periodically replacing the battery of the nodes in large scale deployments is infeasible. Energy efficient mechanisms for gathering sensor readings are indispensable to prolong the lifetime of a sensor network as long as possible. There are two energy-efficient approaches to prolong the network lifetime in sensor networks. One is the compression scheme to reduce the size of sensor readings. When the communication conflict is occurred between two sensor nodes, the sender must try to retransmit its reading. The other is the MAC protocol to prevent the communication conflict. In this paper, we propose a novel approaches to reduce the size of the sensor readings in the MAC layer. The proposed scheme compresses sensor readings by allocating the time slots of the TDMA schedule to them dynamically. We also present a mathematical model to predict latency from collecting the sensor readings as the compression ratio is changed. In the simulation result, our proposed scheme reduces the communication cost by about 52% over the existing scheme.

Development and performance evaluation of traction system for steep gradient and sharp curve track (급구배 및 급곡선 궤도 추진시스템 개발 및 성능 평가)

  • Seo, Sungil;Mun, Hyung-Suk;Moon, Ji-Ho;Suk, Myung-Eun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.9
    • /
    • pp.493-501
    • /
    • 2016
  • In this study, core technologies of a traction system on a mountain tram operating on the track of mountain road full of sharp curves and steep gradients were developed. In domestic mountain resort areas, sometimes the transportation service is not provided in winter because of ice and heavy snow on roads, so a mountain railway service independent of the climate and geographic conditions is needed. A traction system was designed taking into account of the power of a traction motor to climb the gradient of 120 ‰, which is common in domestic mountainous areas. and power transmission system was designed to consider the installation space for the traction system. In addition, a reduction gear and a propeller shaft were developed. An elastic pinion was developed and applied to the rack & pinion bogie system for steep gradient so that noise and vibration generated by contact between the steel gears could be reduced. Impact comparison tests showed that the vibration level of the elastic pinion is one-third lower than that of previous steel pinion. Independent rotating wheels and axles were developed for the bogie system to operate on the sharp curve of a 10 meter radius. In addition, the band braking system was developed to enhance the braking force during running on the steep gradient. A test for the braking force showed it exerts the required braking force. The performance of the developed core components were verified by the tests and finally they were applied to the bogie system running on the track of steep gradient and sharp curve.

Design and Implementation of an Efficient Buffer Replacement Method for Real-time Multimedia Databases Environments (실시간 멀티미디어 데이터베이스 환경을 위한 효율적인 버퍼교체 기법 설계 및 구현)

  • 신재룡;피준일;유재수;조기형
    • Journal of Korea Multimedia Society
    • /
    • v.5 no.4
    • /
    • pp.372-385
    • /
    • 2002
  • In this paper, we propose an efficient buffer replacement method for the real-time multimedia data. The proposed method has multi level priority to consider the real-time characteristics. Each priority level is divided into a cold data set that is likely to be referenced for the first time and a hot data set that is likely to be re-referenced. An operation to select the victim data is sequentially executed from the cold set with the minimum priority level to the hot set with the maximum Priority level. It is chosen only at the lower level than or equal to the priority of the transaction that requests a buffer allocation. In the cold set, our method selects a media that has the maximum size in the level for a target of victim first of all. And in the hot set, our method selects a medium that has the maximum interval of the reference first of all. Since it maintains many popular media in the limited buffer space, the buffer hit ratio is increased. It also manages many service requests. As a result, our method improves the overall performance of the system. We compare the proposed method with the Priority-Hints method in terms of the buffer hit ratio and the deadline missing ratio of transactions. It is shown through the performance evaluation that our method outperforms the existing methods.

  • PDF

The Effect of Composite Ratio and Wall Thickness on the Shear Behavior of Composite Basement Wall (합성율과 벽체두께가 합성지하벽의 전단거동에 미치는 영향)

  • Seo, Soo-Yeon;Kim, Seong-Soo;Yoon, Yong-Dae
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.14 no.1
    • /
    • pp.93-101
    • /
    • 2010
  • When doing underground excavation works for the purpose of constructing large underground structures for a building in the limited space in downtown area, the stability of the adjacent ground must be top priority, and to accomplish this, it is essential to review the retaining wall construction carefully. H-Pile, which has been mainly used as a stress-carrying material in temporary earth-retaining structures, is most likely to be abandoned after completion of the works for the basement exterior wall in relation to contiguous bored piles, so it will result in a waste of material. To improve this situation, Basement Composite Wall where H-Pile and basement wall are compounded, has been developed. This wall is being used most frequently in many local construction sites. In this study, five specimens are made in order to evaluate the shear resistance of the basement composite wall and tested. Test parameter is the composition ratio and wall thickness according to shear connectors. Test result shows that the shear strength is improved when the composite ratio is increased but the magnitude is not much. A formula, which considers the contribution of concrete, web of H-pile as well as flange' effect in calculation of shear strength of composite basement wall, is suggested and used to calculation of the strength of specimens. It is found that there is a good co-relation between test result and the calculated one by the formula.

The Application of GIS for the Prediction of Landslide-Potential Areas (산사태의 발생가능지 예측을 위한 GIS의 적용)

  • Lee, Jin-Duk;Yeon, Sang-Ho;Kim, Sung-Gil;Lee, Ho-Chan
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.5 no.1
    • /
    • pp.38-47
    • /
    • 2002
  • This paper demonstrates a regional analysis of landslide occurrence potential by applying geographic information system to the Kumi City selected as a pilot study area. The estimate criteria related to natural and humane environmental factors which affect landslides were first established. A slope map and a aspect map were extracted from DEM, which was generated from the contour layers of digital topographic maps, and a NDVI vegetation map and a land cover map were obtained through satellite image processing. After the spatial database was constructed, indexes of landslide occurrence potential were computed and then a few landslide-potential areas were extracted by an overlay method. It was ascertained that there are high landslide-potential at areas of about 30% incline, aspects including either south or east at least, adjacent to water areas or pointed end of the water system, in or near fault zones, covered with medium vegetable. For more synthetic and accurate analysis, soil data, forest data, underground water level data, meteorological data and so on should be added to the spatial database.

  • PDF