• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.919-927
• /
• 2019

In this paper, we propose an accurate camera calibration method for acquiring multiview stereoscopic images. Generally, camera calibration is performed by using checkerboard structured patterns. The checkerboard pattern simplifies feature point extraction process and utilizes previously recognized lattice structure, which results in the accurate estimation of relations between the point on 2-dimensional image and the point on 3-dimensional space. Since estimation accuracy of camera parameters is dependent on feature matching, accurate detection of checkerboard corner is crucial. Therefore, in this paper, we propose the method that performs accurate camera calibration method through accurate detection of checkerboard corners. Proposed method detects checkerboard corner candidates by utilizing 1-dimensional gaussian filters with succeeding corner refinement process to remove outliers from corner candidates and accurately detect checkerboard corners in sub-pixel unit. In order to verify the proposed method, we check reprojection errors and camera location estimation results to confirm camera intrinsic parameters and extrinsic parameters estimation accuracy.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.78-87
• /
• 2021

This paper analyzes the range and attributes of the traffic information service between domestic public institutions and private companies, and suggests the possibility of joint application of node-link information for each company and the possibility of joint use of private traffic information. For this purpose, the present condition and attributes of domestic and foreign traffic information node-links (link length, node ID number, U-turn information, lane information, left turn information, right turn information, etc.) were analyzed. The analysis targets, the node-link of the national standard node and the two companies were analyzed. The area of the experiment was selected in Jongno-gu, Seoul, where standard-link information is complex, traffic volume is high, and various standard-links exist. The experiment was conducted by comparing and analyzing the traffic information attributes of three types of node-links and performing node-links overlapping matching (utilizing encoding_decoding method), and the possibility of matching node-links and attributes of different specifications was analyzed using Open LR technique.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.155-168
• /
• 2020

Open source is a key growth engine of the 4th industrial revolution, and the continuous development and use of various algorithms for image processing is expected. The purpose of this study is to examine the effectiveness of the UAS image processing open source based algorithm by comparing and analyzing the water reproduction and moving object filtering function and the time required for data processing in 3D reproduction. Five matching algorithms were compared based on recall and processing speed through the 'ANN-Benchmarks' program, and HNSW (Hierarchical Navigable Small World) matching algorithm was judged to be the best. Based on this, 108 algorithms for image processing were constructed by combining each methods of triangulation, point cloud data densification, and surface generation. In addition, the 3D reproduction and data processing time of 108 algorithms for image processing were studied for UAS (Unmanned Aerial System) images of a park adjacent to the sea, and compared and analyzed with the commercial image processing software 'Pix4D Mapper'. As a result of the study, the algorithms that are good in terms of reproducing water and filtering functions of moving objects during 3D reproduction were specified, respectively, and the algorithm with the lowest required time was selected, and the effectiveness of the algorithm was verified by comparing it with the result of 'Pix4D Mapper'.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.495-503
• /
• 2014

As the number of vehicles has been sharply increases, the significance of safety and effective operation issues in the parking lot is being emphasized, which takes a part of the transportation system. Recently, there have been several studies for the parking management by detecting moving object, however, recognizing numbers of fast-moving vehicles simultaneously in the picture is still a challenging problem. The parking lot in public area, or large-sized buildings has clear parking section, whereas the sensor system is configured to monitor a plurality of parking spaces. Therefore, by considering those parking lots, we suggested to develop the real-time parking availability information system by applying the real-time image processing techniques. with the help of template matching. Following the study, we wanted to provide the alternative method for parking management system through the reference template makers by recognizing movements of parked vehicles with the size and shape, regardless of direct detecting of driving movements. In addition, we evaluated the applicability and performances of the information system, presented in this study, and implemented a prototype system to simulate the parking statuses of each floor. In fat, it was possible to manage and analyze statistics about the total number of parking spaces and the number of vehicles parked through real-time video flames. We expected that the result of the study will be advanced, following the user-friendliness and cost reduction in operating parking management system and giving information by efficient analysis of parking situation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2014

Kompsat-3 is an optical high-resolution earth observation satellite launched in May 2012. In addition to its 0.7m spatial resolution, Kompsat-3 is capable of in-track stereo acquisition enabling quality Digital Elevation Model(DEM) generation. Typical DEM generation procedure requires accurate control points well-distributed over the entire image region. But we often face difficult situations especially when the area of interests is oversea or inaccessible area. One solution to this is to use existing geospatial data even though they only cover a part of the image. This paper aimed to assess accuracy of DEM from Kompsat-3 with different scenarios including no control point, Rational Polynomial Coefficients(RPC) relative adjustment, and RPC adjustment with control points. Experiments were carried out for Kompsat-3 stereo data in USA. We used Digital Orthophoto Quadrangle(DOQ) and Shuttle Radar Topography Mission(SRTM) as control points sources. The generated DEMs are compared to a LiDAR DEM for accuracy assessment. The test results showed that the relative RPC adjustment significantly improved DEM accuracy without any control point. And comparable DEM could be derived from single control point from DOQ and SRTM, showing 7 meters of mean elevation error.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.1
• /
• pp.69-80
• /
• 2022

Drone photogrammetry generally acquires images vertically or obliquely from above, so when photographing for the purpose of three-dimensional modeling, image matching for the ground of a building and spatial accuracy of point cloud data are poor, resulting in poor 3D mesh completeness. Therefore, to overcome this, this study analyzed the spatial accuracy of each drone image by acquiring smartphone images from the ground, and evaluated the accuracy improvement and completeness of 3D mesh when the smartphone image is not combined with the drone image. As a result of the study, the horizontal (x,y) accuracy of drone photogrammetry was about 1/200,000, similar to that of traditional photogrammetry. In addition, it was analyzed that the accuracy according to the photographing method was more affected by the photographing angle of the object than the increase in the number of photos. In the case of the smartphone image combination, the accuracy was not significantly affected, but the completeness of the 3D mesh was able to obtain a 3D mesh of about LoD3 that satisfies the digital twin city standard. Therefore, it is judged that it can be sufficiently used to build a 3D model for digital twin city by combining drone images and smartphones or DSLR images taken on the ground.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.200-204
• /
• 2008

In this paper, to solve localization problem for out-door navigation of robotic vehicles, a particle filter based 3D object recognition framework that can estimate the pose of a building or its entrance is presented. A particle filter framework of multiple evidence fusion and model matching in a sequence of images is presented for robust recognition and pose estimation of 3D objects. The proposed approach features 1) the automatic selection and collection of an optimal set of evidences 2) the derivation of multiple interpretations, as particles representing possible object poses in 3D space, and the assignment of their probabilities based on matching the object model with evidences, and 3) the particle filtering of interpretations in time with the additional evidences obtained from a sequence of images. The proposed approach has been validated by the stereo-camera based experimentation of 3D object recognition and pose estimation, where a combination of photometric and geometric features are used for evidences.

• Journal of Energy Engineering
• /
• v.29 no.3
• /
• pp.86-90
• /
• 2020

This paper examines a blockchain network-based transaction system using location proofing in power direct transactions between networked energy clouds, energy communities, and prosumer machines participating in smart cities. It utilizes location-based blockchain network technology, which enables long-distance travel with recharging by power purchases during autonomous movements, autonomous electric vehicles that can purchase and sell electricity, and solar street lights that can be produced and sold in fixed form. In addition, it is possible to provide optimum power transaction matching and settlement reliability between machines without human intervention in power transactions between electric chargers. It also introduces a business-to-object business model between autonomous machines that exist in multiple and different spaces and through energy clouds that are expected to be scattered with various transaction prices, policies, and incentives.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.82-88
• /
• 2002

In this paper, we proposed a audio indexing method that is used wavelet transform for audio data retrieval. It is difficult for audio data to make a efficient audio data index because of its own particular properties, such as requirement of large storage, real time to transfer and wide bandwidth. An audio data in del using wavelet transform make it possible to index and retrieval by using the particular wavelet transform properties. Our proposed indexing method doesn't separate data to several blocks. Therefore we use both high-pass and low-pass parts of last level coefficient of wavelet transform. Audio data indexing is made by applying the string matching algorithm to high-pass part and zero-crossing histogram to low-pass part. These are transformed to the continued strings, Through this method, we described a retrieval efficiency. The retrieval method is done by comparing the database index string to the query string and then data of minimum values is chosen to the result. Our simulation decided proper comparative coefficient and made known changing of retrieval efficiency versus audio data length. The results show that the proposed method improves retrieval efficiency compared to conventional method.

• Journal of Korea Multimedia Society
• /
• v.12 no.5
• /
• pp.633-643
• /
• 2009

We propose a color transfer method that used color contrast based templates to express the visual difference clearly between objects, while remaining the quality of the input image. Our algorithm employs colors of both the input image and template distributed on the $a^{\ast}b^{\ast}$chrominance plane of CIE $L^{\ast}a^{\ast}b^{\ast}$color space. The templates are made by considering the effect of color contrast and have the shape of either a line or a curve represented color distribution of the basic colors based gradation image. These tempates can be modeled on spline curves. We also generate simply new templates with the different basic colors by moving the control points of that curve. The color transfer method using the templates is done through a regressive analysis and color matching. We maintained color coherence of the input image by transforming similarly the color distribution of an input image to the one of templates.