• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.74-83
• /
• 2019

In the U.S., the pressurization of elevator shaft was developed in 1972 to allow vulnerable people, such as the elderly and weak who could not use escape stairs in case of fire, to evacuate. It is an advantage in terms of space saving by not using vertical ducts. This study drew the problem of the pressurization of elevator shaft based on the existing domestic patents and proposed improvements. The smoke control volume calculation method is proposed by using vertical modeling. Leakage gaps in elevator doors need to be reviewed through experimental data or actual data. The evacuation floor was divided, the openings in the elevator machine room were automatically closed to the fire signal and the relief damper was installed to improve the performance. The improved method functions as the smoke control damper supplying the air flow rather than maintaining the differential pressure. To increase reliability of the research results, the procedure was performed to verify by using Contam.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.51-57
• /
• 2010

In this paper, It propose methods compressing BTC image utilizing data hiding technique. BTC is used to compress general digital image into binary image and applied into application such as printer. Additional information, transferred with binary image, is as big as the size of binary image. Therefore, we wish to reduce the total transmission bandwidth by decreasing the additional information with sustaining the small image degradation. Because typical BTC image doesn't have enough space for data hiding, we adopt Adaptive AMBTC (Absolute Moment BTC) algorithm to produce the binary image, and calculate virtual histogram from created binary image and modify this histogram for reducing the additional information. The proposed algorithm can reduce about 6-11 % of the image file size, compared with the existing BTC algorithm, without making perceptible image degradation.

• Fire Science and Engineering
• /
• v.26 no.2
• /
• pp.90-96
• /
• 2012

Since vertical flame spread speed on exterior materials is much faster than horizontal fire, analysis of its fire characteristic is required. For the study of vertical fire pattern created by penetrating windows or openings from the exterior wall of buildings, the research is based on the fire simulation for an aluminum-complex-panel with which is commonly used as exterior materials and consists of polyethylene core material. As a result, the flame reaches the 2nd floor after 135 seconds in the early stage of fire, the 10the floor after 470 seconds and the 30th floor, the highest floor, after 711 seconds. The result shows that fire spread abruptly expands on upper floor due to stack effect of a turbulent flow or exterior materials. In consequence, we can confirm a serious problem that a conflagration of a building through an opening that is equipped with the exterior-materials spreads into interior of building at that same time.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.85-90
• /
• 2011

This study of the vestibule of pressurizing smoke control system installed in domestic high-rise buildings for evacuation in case of fire, when the door is open to forming characteristics of the air flow was analyzed using fire dynamics simulator and analyzed of variance. Vestibule which is compartment of the design condition, air flow in the exhaust damper was formed severe turbulence confirming preceding research. The door position is in the range of formed vortex, unsteady flow of air occurs at the point that the door could be confirmed. According to the NFSC 501A, door to symmetrically separate the average of 10 points or more as measured from the average of wind speed to do is based. Under these conditions, it is difficult to measure the characteristics of the upper air flow of upper points. so measuring points are subdivided by more than 64 points method presented in TAB because severe deviation of wind speed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.169-175
• /
• 2016

Geofence is a virtual perimeter for a real-world geographical area, which could be statically or dynamically established the specified area if necessary. Many geofencing applications incorporate 2D(two-dimensional) map such as the Google map, allowing administrators to define boundaries on top of a satellite view of a specific geographical area. But these applications do not provide 3D(three-dimensional) spatial information as well as 2D location information no matter where indoor or outdoor. Therefore we propose a mechanism to identify indoor or outdoor location for 3D geofence, and implement 3D geofence using smartphone. The proposed mechanism identifies the position information on 3D geofence regardless of indoor or outdoor, inter-floor with only GPS and WiFi. In the near future, 3D geofence as well as LBS are promising applications that become possible when IoT can become organized and connected by location.

• Archives of design research
• /
• v.16 no.1
• /
• pp.251-260
• /
• 2003

The fact that office environment is a principal factor affecting work efficiency is widely accepted. Under such a circumstance, developing relocatable office wall systems is highly required. Psychological, physiological, and economical factors, along with physical factors, should be considered to develope a office wall system. More specifically, competitive price, relocatable efficiency, structural stability, fast installation, health and safety, and aesthetic satisfaction are typical determinants. The evaluation results of newly developed wall system are as below: 1) Panel structural system added with the merits of frame structural system can be studied to accomplish minimal disruption to workplace and better finish details. 2) To cover up the existing interior defects such as uneven floor and ceiling, flexible solutions must be studied especially when panel structural system is accepted. 3) More consideration must be given to finish materials, section details, sound blocking and absorbtion to enhance the satisfaction level.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.110-116
• /
• 2009

This study is related with fire risk assessment for fire and smoke spread of double skin facade system by use of FDS (Fire Dynamics Simulator) which is a computational fluid dynamics (CFD) model of fire-driven fluid flow. For the study, fire scenario is intended to evaluate the impact of a fire spread for glazed office building. The major purpose of this study is to analyze the fire risk depending on the width of between inner skin and outer skin and to present fire prevention method regarding double skin facade system. The result of analysis presents fire spread more vertically as intermediate space becomes narrow. It is anticipated that fire can spread upper 2 stories above the fire floor if intermediate space with not more than 1m width. Therefore, prevention of vertical fire spread is required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.237-243
• /
• 2018

Performance-oriented design has been introduced in fire protection design, and various efforts have been made to minimize the damage caused by fire in the design stage. We conducted a study to provide information for reasonable design factors using a Fire Dynamic Simulation code provided by the NIST on boundary width and amount of supply. This paper shows that using a living-room air-supply system in a large space and dividing the space by a ventilation boundary are the two factors that are considered to have the greatest influence on the design of the living room ventilation. The results show that for performance-based design, the width of the ventilation boundary is designed to be the maximum limit in the initial design. It is judged that reasonable air volume determination should be made through various methods.

• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.80-87
• /
• 2019

In this paper, we propose a method to apply the polynomial fitting for regional-residual separation of microgravity data based on the characteristics of gravity anomaly without a prior information. Since the microgravity survey is usually carried out in small regions, it is common to approximate regional anomaly by the first-order polynomial plane. However, if the regional anomaly patterns are difficult to be approximated to a first-order plane, the complete gravity anomaly is divided into small zones enough to approximate first-order plane by means of Parasnis density estimation method. The regional-residual separation is then applied on the splitted zones individually. When the gravity anomalies can be splitted spatially, we showed that the residual anomalies can be more effectively extracted based on the regional geological structures by regional anomaly separation from each of the divided regions, rather than applying the entire data set at one time.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.4
• /
• pp.1-21
• /
• 2013

This study has researched the characteristics and elements of the chuibyong, a sort of trellis in the Joseon Dynasty through the old pictorial data. The results were as follows; First, as a result of the analysis for the 25 pictorial data in the Joseon Dynasty, the chuibyongs have usually functioned as screening the facility to protect the private life and dividing the spaces of the site, but it was internally regarded as the props which symbolized the dignity and elegance of high class. Especially, not only the faunas such as crane and deer, and the floras such as Pinus densiflora, Musa basjoo, bamboo species and Paulownia coreana, but also various garden elements including oddly shaped stone, pond and pavilion were shown in the surrounding area of the chuibyong, and they were considered as a series of combination that was needed in the ideal garden for the literati. Secondly, the chuibyong was recognized as the ideological object which was typical of the literati culture in the story derived from an ancient event of China. Such image has been reflected intactly in the garden culture, and the chuibyong has been used(considered) as the important scenery of the season to imitate and reenact the Chinese Classical Garden in the narrative painting. Thirdly, in terms of the shape and function, the chuibyong in the paintings in the Joseon Dynasty basically had the function of the shielding and spatial division. Fourthly, the height of the chuibyung was similar to the one of fence which exceeds the person's height or Youngbyek(影壁) which is installed in the front and the rear of the main gate in China, and the various shape's chuibyung was properly set up in many spaces. Lastly, the making of the chuibyong in Joseon Dynasty was related to the trend of the writer's culture which was popular nationally in Ming dynasty rather than the particular functions or the location conditions. Especially, the symbol expression of the chuibyong showed on 'Elegant Gathering in the Western Garden' which was brought from China was recreated in the mansion of the upper class in Hanyang city as the center, and the primary mode for the expression of the wealth and writer's spirit through the chuibyong was transformed into the high-quality's garden element which could be created in the royal palace or the mansion of the upper class. Also, the use of the chuibyung was changed by spreading into the residential style for common people after the mid-nineteenth century, and it means that the chuibyung was developed into Korean styles.