• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.437-448
• /
• 2016

Some previous researches suggested a transit trip destination inference method by constructing trip chains with incomplete(missing destination) smart card dataset obtained on the entry fare control systems. To explore the feasibility of the transit trip destination inference method, the transit trip chains are constructed from the pre-paid smart card tagging data collected in Busan on October 2014 weekdays by tracing the card IDs, tagging times(boarding, alighting, transfer), and the trip linking distances between two consecutive transit trips in a daily sequences. Assuming that most trips in the transit trip chains are linked successively, the individual transit trip destination zones are inferred as the consecutive linking trip's origin zones. Applying the model to the complete trips with observed OD reveals that about 82% of the inferred trip destinations are the same as those of the observed trip destinations and the inference error defined as the difference in distance between the inferred and observed alighting stops is minimized when the trip linking distance is less than or equal to 0.5km. When applying the model to the incomplete trips with missing destinations, the overall destination missing rate decreases from 71.40% to 21.74% and approximately 77% of the destination missing trips are the single transit trips for which the destinations can not be inferable. In addition, the model remarkably reduces the destination missing rate of the multiple incomplete transit trips from 69.56% to 6.27%. Spearman's rank correlation and Chi-squared goodness-of-fit tests showed that the ranks for transit trips of each zone are not significantly affected by the inferred trips, but the transit trip distributions only using small complete trips are significantly different from those using complete and inferred trips. Therefore, it is concluded that the model should be applicable to derive a realistic transit trip patterns in cities with the incomplete smart card data.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.4
• /
• pp.229-241
• /
• 2006

Global air temperature has risen by $0.6^{\circ}C$ over the last one hundred years due to increased atmospheric greenhouse gases. Moreover, this global warming trend is projected to continue in the future. This study was carried out to evaluate spatial variations in rice production areas by simulating rice-growth and development with projected high resolution climate data in Korea far 2011-2100, which was geospatially interpolated from the 25 km gridded data based on the IPCC SRES A2 emission scenario. Satellite remote sensing data were used to pinpoint the rice-growing areas, and corresponding climate data were aggregated to represent the official 'crop reporting county'. For the simulation experiment, we used a CERES-Rice model modified by introducing two equations to calculate the leaf appearance rate based on the effective temperature and existing leaf number and the final number of leaves based on day-length in the photoperiod sensitive phase of rice. We tested the performance of this model using data-sets obtained from transplanting dates and nitrogen fertilization rates experiments over three years (2002 to 2004). The simulation results showed a good performance of this model in heading date prediction [$R^2$=0.9586 for early (Odaebyeo), $R^2$=0.9681 for medium (Hwasungbyeo), and $R^2$=0.9477 for late (Dongjinbyeo) maturity cultivars]. A modified version of CERES-Rice was used to simulate the growth and development of three Japonica varieties, representing early, medium, and late maturity classes, to project crop status for climatological normal years between 2011 and 2100. In order to compare the temporal changes, three sets of data representing 3 climatological years (2011-2040, 2041-2070, and 2071-2100) were successively used to run the model. Simulated growth and yield data of the three Japonica cultivars under the observed climate for 1971-2000 was set as a reference. Compared with the current normal, heading date was accelerated by 7 days for 2011-2040 and 20 days for 2071-2100. Physiological maturity was accelerated by 15 days for 2011-2040 and 30 days for 2071-2100. Rice yield was in general reduced by 6-25%, 3-26%, and 3-25% per 10a in early, medium, and late maturity classes, respectively. However, mid to late maturing varieties showed an increased yield in northern Gyeonggi Province and in most of Kwangwon Province in 2071-2100.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.3
• /
• pp.32-40
• /
• 2017

The introduction of neo-Confucianism as the ideological foundation of Joseon, and its root Confucianism have become the origin of the life, scholarship and ideology of the Korean people. Additionally, it was considered the best to follow the teachings of the discipline's advocates including Confucius (孔子), Mencius (孟子), Zisi (子思), ZhuXi (朱子). Among these teachers, ZhuXi was the one who overtly presented the way of self-discipline, of which goal lies in attaining the character by the manifestation of vitality (氣 ki) and rationality (理 i) and contemplating on them. As he regarded natural places with mountains and waters as stages and tools for practicing toward the enlightenment, Confucian scholars in Joseon also followed his example in the spirit of honoring and studying ZhuXi (尊朱子, 學朱子), which became the basic thoughts and practical philosophy among them. Ryu, Junggyo, the neo-Confucian dogmatist, was no exception to applaud the nature, as he designated and ruled Okgye Gugok. On the basis of these backgrounds, this study aims to estimate the geographic places of Okgye Gugok, which was set by Ryu, Junggyo, a Confucian scholar in late-Joseon period, by collecting and analyzing the basic data, starting from Gareung-gun Okgye Sansugi(嘉陵郡玉溪山水記) which is the primary text authored by Seongjae Ryu, Junggyo. The literature study is followed by ten field trips to the estimated locations of Okgye Gugok, and verification of the estimations by three locals who were born and raised in Okgye Gugok. Coordinates and photographs were obtained as spatial data for each location of nine Gok(曲) estimated through this study. They will serve as a primary and critical data for story-telling and tourism resource in Okgye Gugok. The significance of this study is that it provides the primary data for designating the locations of Gok(曲) in Okgyeo Gugok.

• Journal of Distribution Science
• /
• v.9 no.4
• /
• pp.93-102
• /
• 2011

With the increasing interest in boosting conventional markets, many authors have paid considerable attention to the roles of shop owners, store image improvement, and how to attract or maintain customers. Nevertheless, it is not easy to find papers related to the relationship between shop owners and their contribution to trading areas, directly or indirectly, in the academic world. Accordingly, research for answering the following question has been initiated: what kind of roles do shopkeepers should play in revitalizing poor conventional markets? Based on the previous studies focusing on enhancing traditional markets, this research was approached from the new insights that have been obtained concerning how to boost conventional markets, that is, from the perspectives of a shop owner and a trader. Therefore, this research aims at identifying some resolutions associated with the roles of shop owners to enhance a shopping district in a specific area, classifying their business roles into a few categories, depending on the degree of their participation in improving the shopping environment. Compared with previous studies focusing on emphasizing the importance of improving customer services from a shopkeeper's perspective, this research provides a new insight as far as how to boost conventional markets. It is, furthermore, necessary to note how market participants, particularly shop owners as they are the key players, can contribute to rebuilding their business area together with their customers. As a research technique for effectively achieving the research goal, the authors adopted a documentation methodology based on a large amount of the existing literature for studying how to rebuild traditional markets. Concerned about the ways to revitalize conventional markets, many authors have proposed a variety of strategies, and have suggested more detailed action plans from a practitioner's perspective. By analyzing these research results, the authors will have accomplished the research aim. Rather than simply identifying the roles of shop owners, the author found that they had to understand their social contribution for enhancing their trading areas, as well as their functional roles, in forming a regional society. The conventional market should be, thus, regarded as the place to share regional culture. Consequently, the authors draw some conclusions from the research results. In order to answer the above question, it was found that the roles of shop owners have been considered as one of the most important ways for revitalizing traditional markets. With respect to their roles, it is evident that their business activities are closely related to the improvement of the trading area in terms of sociality, regional development, and market revitalization, by selling products or services to the customers visiting that area. In a word, this implies that shop owners have to actively take part in boosting conventional markets as a core player. Although the authors have properly achieved the research aim, this study has a limitation, like most other research, in adopting a documentation method. Because the research is based on existing data results provided by the prior research conducted a long time ago, whether the research findings are applicable in a contemporary market should be re-examined in future research from a practitioner's perspective, rather than from an academic's perspective.

• Korean Security Journal
• /
• no.22
• /
• pp.145-168
• /
• 2010

Since Alarm Monitoring Service was introduced in Korea in 1981, the market has been increasing and is expected to increase continually. Some factors such as the increase of social security need and the change of safety consciousness, increase of persons who live alone could be affected positively on Alarm Monitoring Service industry. As Alarm Monitoring Service come into wide use, the understanding of electronic security service is spread and consumer's demand is difficult, so consideration about new developmental plan is need to respond to the change actively. Electronic security system is consist of various kinds of element, so every element could do their role equally. Alarm Monitoring Service should satisfy consumer's various needs because it is not necessary commodity, also electronic security device could be easily operated and it's appearance has to have a good design. To solve the false alarm problem, detection sensor's improvement should be considered preferentially and development of new type of sensor that operate dissimilarly to replace former sensor is needed. On the other hand, to settle the matter that occurred by response time, security company could explain the limit on Alarm Monitoring System to consumer honestly and ask for an understanding. If consumer could be joined into security activity by security agent's explanation, better security service would be provided with mutual confidence. To save response time the consideration on the introduction of GIS(Global Information System) is needed rather than GPS(Global Positioning System). Although training program for security agents is important, several benefits for security agents should be considered together. The development of new business model is required for preparation against market stagnation and the development of new commodity to secure consumer for housing service rather than commercial facility service. for the purpose of those, new commodity related to home-network system and video surveillance system could be considered, also new added service with network between security company and consumer for a basis is to be considered.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.363-368
• /
• 2003

We have successfully developed a more effective algorithm to extract the lineament in the area covered by wide alluvial deposits characterized by a relatively narrow range of brightness in the Landsat TM image, while the currently used algorithm is limited to the mountainous areas. In the new algorithm, flat areas mainly consisting of alluvial deposits were selected using the Local Enhancement from the Digital Elevation Model (DEM). The aspect values were obtained by 3${\times}$3 moving windowing of Zevenbergen & Thorno's Method, and then the slopes of the study area were determined using the aspect values. After the lineament factors in the alluvial deposits were revealed by comparing the threshold values, the first rank lineament under the alluvial deposits were extracted using the Hough transform In order to extract the final lineament, the lowest points under the alluvial deposits in a given topographic section perpendicular to the first rank lineament were determined through the spline interpolation, and then the final lineament were chosen through Hough transform using the lowest points. The algorithm developed in this study enables us to observe a clearer lineament in the areas covered by much larger alluvial deposits compared with the results extracted using the conventional existing algorithm. There exists, however, some differences between the first rank lineament, obtained using the aspect and the slope, and the final lineament. This study shows that the new algorithm more effectively extracts the lineament in the area covered with wide alluvlal deposits than in the areas of converging slope, areas with narrow alluvial deposits or valleys.

• Spatial Information Research
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2014

Near surface air temperature data which are one of the essential factors in hydrology, meteorology and climatology, have drawn a substantial amount of attention from various academic domains and societies. Meteorological observations, however, have high spatio-temporal constraints with the limits in the number and distribution over the earth surface. To overcome such limits, many studies have sought to estimate the near surface air temperature from satellite image data at a regional or continental scale with simple regression methods. Alternatively, we applied various Kriging methods such as ordinary Kriging, universal Kriging, Cokriging, Regression Kriging in search of an optimal estimation method based on near surface air temperature data observed from automatic weather stations (AWS) in South Korea throughout 2010 (365 days) and MODIS land surface temperature (LST) data (MOD11A1, 365 images). Due to high spatial heterogeneity, auxiliary data have been also analyzed such as land cover, DEM (digital elevation model) to consider factors that can affect near surface air temperature. Prior to the main estimation, we calculated root mean square error (RMSE) of temperature differences from the 365-days LST and AWS data by season and landcover. The results show that the coefficient of variation (CV) of RMSE by season is 0.86, but the equivalent value of CV by landcover is 0.00746. Seasonal differences between LST and AWS data were greater than that those by landcover. Seasonal RMSE was the lowest in winter (3.72). The results from a linear regression analysis for examining the relationship among AWS, LST, and auxiliary data show that the coefficient of determination was the highest in winter (0.818) but the lowest in summer (0.078), thereby indicating a significant level of seasonal variation. Based on these results, we utilized a variety of Kriging techniques to estimate the surface temperature. The results of cross-validation in each Kriging model show that the measure of model accuracy was 1.71, 1.71, 1.848, and 1.630 for universal Kriging, ordinary Kriging, cokriging, and regression Kriging, respectively. The estimates from regression Kriging thus proved to be the most accurate among the Kriging methods compared.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2009

Purpose: Nowadays in the nuclear medicine, many studies and efforts are being made to reduce the scan time, as well as the waiting time to be needed to execute exams after injection of radionuclide medicines. Several methods are being used in clinic, such as developing new radionuclide compounds that enable to be absorbed into target organs more quickly and reducing acquisition scan time by increase the number of Gamma Camera detectors to examine. Each medical equipment manufacturer has improved the imaging process techniques to reduce scan time. In this paper, we tried to analyze the difference of image quality between FBP, 3D OSEM reconstruction methods that commercialized and being clinically applied, and Astonish reconstruction method (A kind of Iterative fast reconstruction method of Philips), also difference of image quality on scan time. Material and Methods: We investigated in 32 patients that examined the Bone SPECT from June to July 2008 at department of nuclear medicine, ASAN Medical Center in Seoul. 40sec/frame and 20sec/frame images were acquired that using Philips‘ PRECEDENCE 16 Gamma Camera and then reconstructed those images by using the Astonish (Philips’ Reconstruction Method), 3D OSEM and FBP methods. The blinded test was performed to the clinical interpreting physicians with all images analyzed by each reconstruction method for qualitative analysis. And we analyzed target to non target ratio by draws lesions as the center of disease for quantitative analysis. At this time, each image was analyzed with same location and size of ROI. Results: In a qualitative analysis, there was no significant difference by acquisition time changes in image quality. In a quantitative analysis, the images reconstructed Astonish method showed good quality due to better sharpness and distinguish sharply between lesions and peripheral lesions. After measuring each mean value and standard deviation value of target to non target ratio with 40 sec/frame and 20sec/frame images, those values are Astonish (40 sec-$13.91{\pm}5.62$ : 20 sec-$13.88{\pm}5.92$), 3D OSEM (40 sec-$10.60{\pm}3.55$ : 20 sec-$10.55{\pm}3.64$), FBP (40 sec-$8.30{\pm}4.44$ : 20 sec-$8.19{\pm}4.20$). We analyzed target to non target ratio from 20 sec and 40 sec images. And we analyzed the result, In Astonish (t=0.16, p=0.872), 3D OSEM (t=0.51, p=0.610), FBP (t=0.73, p=0.469) methods, there was no significant difference statistically by acquisition time change in image quality. But FBP indicates no statistical differences while some images indicate difference between 40 sec/frame and 20 sec/frame images by various factors. Conclusions: In the circumstance, try to find a solution to reduce nuclear medicine scan time, the development of nuclear medicine equipment hardware has decreased while software has marched forward at a relentless. Due to development of computer hardware, the image reconstruction time was reduced and the expanded capacity to restore enables iterative methods that couldn't be performed before due to technical limits. As imaging process technique developed, it reduced scan time and we could observe that image quality keep similar level. While keeping exam quality and reducing scan time can induce the reduction of patient's pain and sensory waiting time, also accessibility of nuclear medicine exam will be improved and it provide better service to patients and clinical physician who order exams. Consequently, those things make the image of department of nuclear medicine be improved. Concurrent Imaging - A new function that setting up each image acquisition parameter and enables to acquire images simultaneously with various parameters to once examine.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.20-24
• /
• 2009

Objective: In this study, the differences between two reconstruction methods were analyzed by comparing image uniformity and contrast according to Iteration and Subset, which were altered through the Iterative method and True X method, used in Siemens' PET/CT studies. Methods: The Phantom images were obtained by exposure for two minutes per one bed. To determine the image uniformity, the Coefficient of variance was used. Also, in order to compare the contrast value, we measured and analyzed the ratio of the SUV mean of Phantom image's hot spheres and the background. Results: Under the same reconstruction conditions (Iteration and Subset) of CV, the Iterative method was higher than the True X method. In the comparison of the SUV mean ratio of the background and hot sphere, the True X method had a closer rate than the Iterative method. Conclusion: The newly developed True X reconstruction method is better than the previously used Iterative method in terms of uniformity and contrast. However, the date for this study was only obtained using the Phantom device. In order to obtain more accurate and useful information from the experiment, further research should be conducted. Also, it is necessary to find the appropriate standards for Iteration and Subset for further experimentation.

• Korean Security Journal
• /
• no.31
• /
• pp.157-185
• /
• 2012

Today, the emergence of cyberspace and advancement of globalization caused not only the transformation of our productive and conventional life but also the revolutionary transition of use of destructive violence such as crime and warfare. This transition of environmental condition connects various security threats which separatedly existed in individual, local, national, and global levels in the past, and transformed the mechanical sum of all levels of security threats into the organic sum of multi-dimensional security threats. This article proposes that the sum of multi-dimensional security threats is caused by the interconnectivity of various different levels of security threats and the integrated interdisciplinary perspective is essential to properly understand the fundamental existence of today's security problem and the reality of fear that we face today. The holistic security, the concept proposed here, is to suggest the mode of networked response to multi-dimensional security threats. The holistic security is suggested to overcome the conventional divisional approach based on the principle of "division of labor" and bureaucratic principles, which means more concretely that national security and criminal justice are divided and intelligence, military, police, prosecution, fire-fighting, private security, and etc. are strictly separated into its own expertise and turf. Also, this article introduces integrated security approaches tried by international organization and major countries overseas with the respect of the holistic security. The author have spent some substantial experience of participant observation, meetings, seminar, conference, and expert interviews regarding the issues discussed in the article in various countries including the United States, Russia, Austria, Germany, Canada, Mexico, Israel, and Uzbekistan for the last ten years. Intelligence and information on various levels of security threats and security approaches introduced in this paper is obtained from such opportunities.