• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1311-1317
• /
• 2018

The ultimate goal of satellite development is to use information obtained from satellites. Therefore, national-levelsatellite development program should include not only hardware development, but also infrastructure establishment and application technology development for information utilization. Until now, Korea has developed various satellites and has been very useful in weather and maritime surveillance as well as various disasters. In particular, KOMPSAT (Korea Multi-purpose Satellite) images have been used extensively in agriculture, forestry and marine fields based on high spatial resolution, and has been widely used in research related to precision mapping and change detection. This special issue aims to introduce a variety of recent studies conducted using KOMPSAT optical and SAR (Synthetic Aperture Radar) images and to disseminate related satellite image application technologies to the public sector.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.247-249
• /
• 2016

Corporation, local government and government office provide useful information. Advertisement service is getting various manner. Typical example is electronic display, TV-advertisement and internet or mobile advertisement service. In this paper, I'm study about Taxi-advertisement service still. A similar case is bus or subway advertisement from display. But, Taxi have been only lapping advertisement. Because, Taxi get space restraints. Broadly speaking, Person using Gyeonggi-do to Soeul or Incheon to Soeul is 423million people. On a national basis, it's very amazing figure. However It's just so many person showing one advertisement. So people have no interest in advertisement. So I develop new advertisement system through taxi in the whole country. 254,823 car have passenger personal information and showing people needing advertisement. Also this system get geographical information. This system have high advertisement effect.

• Particle and aerosol research
• /
• v.16 no.4
• /
• pp.73-94
• /
• 2020

Particulate infectious sources, including infectious viruses, can float in the air, causing airborne infections. To prevent indoor airborne infection, dilution control by ventilation and indoor air cleaners are frequently used. In this study, the risk of airborne infection by the operation of these two techniques was evaluated. In case of dilution control by ventilation, a high efficiency air filter was embedded at the inlet of supply air. In this study, infectious source reduction devices such as indoor air cleaner include all kinds of mechanical-filters, UV-photo catalysts and air ionizers through which air flow is forced by fans. Two mathematical models for influenza virus were applied in an infant care room where infants and young children are active, and the risk reduction efficiency was compared. As a result, in the case of individually operating the ventilator or the infectious source reduction device, the airborne infection risk reduction efficiencies were 55.2~61.2% and 53.8~59.9%, respectively. When both facilities were operated, it was found that the risk of airborne infection was reduced about 72.2~76.8%. Therefore, simultaneous operation of ventilation equipment and infectious source reduction device is the most effective method for safe environment that minimizes the risk of airborne infection of respiratory infectious diseases. In the case of a space where sufficient ventilation operation is difficult, it was found that the operation of an infectious source reduction device is important to prevent the spread of infectious diseases. This study is meaningful in that it provides an academic basis for strategies for preventing airborne infection of respiratory infectious diseases.

• Tunnel and Underground Space
• /
• v.31 no.6
• /
• pp.415-427
• /
• 2021

This technical report briefly introduced the rock cutting splitting method under development. This method is a method of excavating the rock by splitting the block after the rock cutting process. After designing the cutting geometry of the rock face, the chisel is press-fitted to remove the rock block. At this time, when the cutting block is properly designed, the tensile crack propagates smoothly at the bottom of the rock block. An analytical solution was devised to estimate the indentation force required for splitting rock blocks using fracture toughness mode 1 required for tensile crack growth. The impact force of the hydraulic breaker of the excavator was analyzed, and the grade of the excavator that can be constructed according to the rock block design geometry was analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1723-1728
• /
• 2021

C-ITS is an intelligent transportation system that can improve transportation convenience and traffic safety by collecting, managing, and providing traffic information between components such as vehicles, road infrastructure, drivers, and pedestrians. In Korea, road infrastructure is being built across the country through the C-ITS project, and various services such as real-time traffic information provision and bus operation management are provided. However, the current state-of-the-art road infrastructure and information linkage system are insufficient to build C-ITS. In this paper, considering the continuity of time in various spatial aspects, we proposed a group-type network-based traffic situation recognition system that can recognize traffic flows and unexpected accidents through information linkage between traffic infrastructures. It is expected that the proposed system can primarily respond to accident detection and warning in the field, and can be utilized as more diverse traffic information services through information linkage with other systems.

• Particle and aerosol research
• /
• v.17 no.2
• /
• pp.37-42
• /
• 2021

Although the installation of droplet protection screen (DPS) is known to prevent droplet transmission, there is still a lack of knowledge in effectiveness of DPS installation to block the airborne transmission. In this study, the prevention ability of DPS against airborne transmission was evaluated according to the DPS height. When the DPS was not installed, the maximum concentration of PM1.0 at the location opposite to infected person was 35% of that at the infected person location. When the DPS was installed, the DPS effectively prevented the airborne transmission, consequently approximately 7% of generated particles were measured at the opposite location from particle generation position (infected person location). The prevention ability of DPS increased with DPS height, the maximum prevention efficiency of 95.1% was obtained when the DPS height was 900mm. Moreover, the speed of airborne transmission was delayed by installation of DPS, and the delay time increased with DPS height.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.41-48
• /
• 2022

This study is a study that designed in-building antennas with improved orientation to improve 5G quality in buildings as 5G is stabilized and more and more traffic is expected to occur in buildings. Instead of applying the forward arrangement of antenna elements, which is the Yagi antenna propagation orientation principle, the antenna design method of vertical arrangement applied to the base station antenna was proposed, and it was confirmed through experiments that antenna orientation increased. According to the experimental results, the directivity did not increase significantly within 10m of the separation distance from the antenna, but the directivity increased by about 3dB at the distance separated by more than 10m. Considering that the wireless environment in the building has various variables such as structure of internal structure, materials such as concrete and glass, closed space, and walls, it is expected that antenna with improved orientation can expand the scope of 5G quality improvement and maintain stable communication service in the building.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.209-213
• /
• 2023

Currently, 2.4 GHz and 5 GHz bands are used as frequencies for drone operation. In December 2019, the Ministry of Science and ICT newly allocated the 433 MHz band for the invisible long-distance operation of drones. However, since the 433 MHz band is the same as the previously allocated frequency band for amateur radio communication, interference cannot be avoided. Therefore, as a prerequisite for the development of a drone operation system based on the 433 MHz band, interference avoidance technology for this frequency band must be developed and applied. In this paper, we report the results of measurement and analysis of 433 MHz band signals necessary for the development of interference avoidance and reduction technologies for 433 MHz signals. The measurement and analysis of the 433 MHz band signal are performed through the spectrum measured at 5-minute intervals at three locations. Since the measurements and analyzes performed in this study considered spatial characteristics, temporal characteristics, and traffic characteristics, it is considered to be the basic data necessary for the development of interference avoidance technology in the 433 MHz band.

• Smart Media Journal
• /
• v.11 no.1
• /
• pp.46-57
• /
• 2022

In this paper, multi-region based Radial Graph Convolutional Network (MRGCN) algorithm which can perform end-to-end action recognition using the optical flow and gradient of input image is described. Because this method does not use information of skeleton that is difficult to acquire and complicated to estimate, it can be used in general CCTV environment in which only video camera is used. The novelty of MRGCN is that it expresses the optical flow and gradient of the input image as directional histograms and then converts it into six feature vectors to reduce the amount of computational load and uses a newly developed radial type network model to hierarchically propagate the deformation and shape change of the human body in spatio-temporal space. Another important feature is that the data input areas are arranged being overlapped each other, so that information is not spatially disconnected among input nodes. As a result of performing MRGCN's action recognition performance evaluation experiment for 30 actions, it was possible to obtain Top-1 accuracy of 84.78%, which is superior to the existing GCN-based action recognition method using skeleton data as an input.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.155-161
• /
• 2023

In this paper, we present a WebRTC-based emergency video call system structure that builds a service system in a constant monitoring environment to increase the usability and stability of elevator emergency call devices. The proposed system provides a smooth call environment between the emergency call system in the elevator and maintenance managers in case of an emergency, performs rapid response processing to elevator emergency calls through monitoring of the target elevator, and handles any emergency calls that may occur in the physical space of the elevator. The purpose is to build an environment that can implement low-latency, real-time video call services of voice and video by overcoming the physical constraints required for video calls. To this end, we have established a service environment based on OpenAPI, which is currently used in various fields and its performance has been proven, and provides video calls and emergency situation dissemination through rapid messaging by providing low-latency call quality. The presented system structure will be able to provide a basis for expanding various functions and constructing a reliable service environment and intelligent model for the elevator system through combination with the elevator control panel and various devices.